Question 190
A support case documents the following situation: A receipt printer produces completely blank receipts after a new roll is installed with the thermal coating facing away from the head. Which response BEST addresses the actual cause or requirement?
- Keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Replace the spent ink ribbon before changing the printer controller.
- Reload the correct thermal paper with its coated side facing the heating element.
- Clean the approved feed path and heating element per the printer's maintenance instructions.
Explanation
Correct Answer
C:Direct thermal printing relies on heat-sensitive coating positioned against the printhead.
Incorrect Answers
A:Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing; direct thermal printing relies on heat-sensitive coating positioned against the printhead.
B:An exhausted ribbon can produce faint impact output despite otherwise working mechanics; direct thermal printing relies on heat-sensitive coating positioned against the printhead.
D:Label adhesive and dust can impair thermal transfer and media movement; direct thermal printing relies on heat-sensitive coating positioned against the printhead.
Question 191
A device support specialist must respond to this request: A shipping-label printer has poor feed consistency because adhesive debris has accumulated around the thermal feed assembly. Which next step MOST directly resolves the reported condition?
- Keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Replace the spent ink ribbon before changing the printer controller.
- Reload the correct thermal paper with its coated side facing the heating element.
- Clean the approved feed path and heating element per the printer's maintenance instructions.
Explanation
Correct Answer
D:Label adhesive and dust can impair thermal transfer and media movement.
Incorrect Answers
A:Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing; label adhesive and dust can impair thermal transfer and media movement.
B:An exhausted ribbon can produce faint impact output despite otherwise working mechanics; label adhesive and dust can impair thermal transfer and media movement.
C:Direct thermal printing relies on heat-sensitive coating positioned against the printhead; label adhesive and dust can impair thermal transfer and media movement.
Question 192
An end user reports the following condition: A dot-matrix printer must create carbonless multipart forms but the technician replaces it with a direct thermal receipt printer. What should the support specialist recommend FIRST within the stated limits?
- Clean the approved feed path and heating element per the printer's maintenance instructions.
- Keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Replace the spent ink ribbon before changing the printer controller.
- Reload the correct thermal paper with its coated side facing the heating element.
Explanation
Correct Answer
B:Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing.
Incorrect Answers
A:Clean the approved feed path and heating element per the printer's maintenance instructions would not keep an appropriate impact printer with a correctly installed ribbon for multipart output.
C:Replacing the spent ink ribbon would not keep an appropriate impact printer with a correctly installed ribbon for multipart output.
D:Reload the correct thermal paper with its coated side facing the heating element would not keep an appropriate impact printer with a correctly installed ribbon for multipart output.
Question 193
A help desk receives a support ticket with this evidence: An impact printer's text gradually fades evenly while the paper advances normally and the printhead still strikes the ribbon. What is the MOST appropriate technician action?
- Clean the approved feed path and heating element per the printer's maintenance instructions.
- Keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Replace the spent ink ribbon before changing the printer controller.
- Reload the correct thermal paper with its coated side facing the heating element.
Explanation
Correct Answer
C:An exhausted ribbon can produce faint impact output despite otherwise working mechanics.
Incorrect Answers
A:Clean the approved feed path and heating element per the printer's maintenance instructions would not replace the spent ink ribbon.
B:Keeping an appropriate impact printer with a correctly installed ribbon for multipart output would not replace the spent ink ribbon.
D:Reload the correct thermal paper with its coated side facing the heating element would not replace the spent ink ribbon.
Question 194
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A receipt printer produces completely blank receipts after a new roll is installed with the thermal coating facing away from the head. A shipping-label printer has poor feed consistency because adhesive debris has accumulated around the thermal feed assembly. Which course of action addresses the stated issues?
- Keep an appropriate impact printer with a correctly installed ribbon for multipart output; replace the spent ink ribbon before changing the printer controller.
- Reload the correct thermal paper with its coated side facing the heating element; Clean the approved feed path and heating element per the printer's maintenance instructions.
- Keep an appropriate impact printer with a correctly installed ribbon for multipart output; Clean the approved feed path and heating element per the printer's maintenance instructions.
- Reload the correct thermal paper with its coated side facing the heating element; replace the spent ink ribbon before changing the printer controller.
Explanation
Correct Answer
B:For ticket (1), Direct thermal printing relies on heat-sensitive coating positioned against the printhead. For ticket (2), Label adhesive and dust can impair thermal transfer and media movement.
Incorrect Answers
A:For ticket 1, reload the correct thermal paper with its coated side facing the heating element. Direct thermal printing relies on heat-sensitive coating positioned against the printhead. For ticket 2, clean the approved feed path and heating element per the printer's maintenance instructions. Label adhesive and dust can impair thermal transfer and media movement.
C:For ticket 1, reload the correct thermal paper with its coated side facing the heating element. Direct thermal printing relies on heat-sensitive coating positioned against the printhead.
D:For ticket 2, clean the approved feed path and heating element per the printer's maintenance instructions. Label adhesive and dust can impair thermal transfer and media movement.
Question 195
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A receipt printer produces completely blank receipts after a new roll is installed with the thermal coating facing away from the head. A dot-matrix printer must create carbonless multipart forms but the technician replaces it with a direct thermal receipt printer. Which response best addresses these needs?
- Reload the correct thermal paper with its coated side facing the heating element; replace the spent ink ribbon before changing the printer controller.
- Clean the approved feed path and heating element per the printer's maintenance instructions; replace the spent ink ribbon before changing the printer controller.
- Reload the correct thermal paper with its coated side facing the heating element; keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Clean the approved feed path and heating element per the printer's maintenance instructions; keep an appropriate impact printer with a correctly installed ribbon for multipart output.
Explanation
Correct Answer
C:For ticket (1), Direct thermal printing relies on heat-sensitive coating positioned against the printhead. For ticket (2), Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing.
Incorrect Answers
A:For ticket 2, keep an appropriate impact printer with a correctly installed ribbon for multipart output. Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing.
B:For ticket 1, reload the correct thermal paper with its coated side facing the heating element. Direct thermal printing relies on heat-sensitive coating positioned against the printhead. For ticket 2, keep an appropriate impact printer with a correctly installed ribbon for multipart output. Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing.
D:For ticket 1, reload the correct thermal paper with its coated side facing the heating element. Direct thermal printing relies on heat-sensitive coating positioned against the printhead.
Question 196
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A shipping-label printer has poor feed consistency because adhesive debris has accumulated around the thermal feed assembly. An impact printer's text gradually fades evenly while the paper advances normally and the printhead still strikes the ribbon. What is the most appropriate plan for this situation?
- Reload the correct thermal paper with its coated side facing the heating element; replace the spent ink ribbon before changing the printer controller.
- Clean the approved feed path and heating element per the printer's maintenance instructions; keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Reload the correct thermal paper with its coated side facing the heating element; keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Clean the approved feed path and heating element per the printer's maintenance instructions; replace the spent ink ribbon before changing the printer controller.
Explanation
Correct Answer
D:For ticket (1), Label adhesive and dust can impair thermal transfer and media movement. For ticket (2), An exhausted ribbon can produce faint impact output despite otherwise working mechanics.
Incorrect Answers
A:For ticket 1, clean the approved feed path and heating element per the printer's maintenance instructions. Label adhesive and dust can impair thermal transfer and media movement.
B:For ticket 2, replace the spent ink ribbon before changing the printer controller. An exhausted ribbon can produce faint impact output despite otherwise working mechanics.
C:For ticket 1, clean the approved feed path and heating element per the printer's maintenance instructions. Label adhesive and dust can impair thermal transfer and media movement. For ticket 2, replace the spent ink ribbon before changing the printer controller. An exhausted ribbon can produce faint impact output despite otherwise working mechanics.
Question 197
A support team must resolve TWO distinct issues at the same location, using approved non-destructive maintenance: A dot-matrix printer must create carbonless multipart forms but the technician replaces it with a direct thermal receipt printer. An impact printer's text gradually fades evenly while the paper advances normally and the printhead still strikes the ribbon. Which course of action addresses the stated issues?
- Reload the correct thermal paper with its coated side facing the heating element; Clean the approved feed path and heating element per the printer's maintenance instructions.
- Keep an appropriate impact printer with a correctly installed ribbon for multipart output; replace the spent ink ribbon before changing the printer controller.
- Reload the correct thermal paper with its coated side facing the heating element; replace the spent ink ribbon before changing the printer controller.
- Keep an appropriate impact printer with a correctly installed ribbon for multipart output; Clean the approved feed path and heating element per the printer's maintenance instructions.
Explanation
Correct Answer
B:For ticket (1), Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing. For ticket (2), An exhausted ribbon can produce faint impact output despite otherwise working mechanics.
Incorrect Answers
A:For ticket 1, keep an appropriate impact printer with a correctly installed ribbon for multipart output. Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing. For ticket 2, replace the spent ink ribbon before changing the printer controller. An exhausted ribbon can produce faint impact output despite otherwise working mechanics.
C:For ticket 1, keep an appropriate impact printer with a correctly installed ribbon for multipart output. Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing.
D:For ticket 2, replace the spent ink ribbon before changing the printer controller. An exhausted ribbon can produce faint impact output despite otherwise working mechanics.
Question 198
A service coordinator has THREE separate support tickets and needs the correct matching actions: A receipt printer produces completely blank receipts after a new roll is installed with the thermal coating facing away from the head. A shipping-label printer has poor feed consistency because adhesive debris has accumulated around the thermal feed assembly. A dot-matrix printer must create carbonless multipart forms but the technician replaces it with a direct thermal receipt printer. Which response best addresses these needs?
- Reload the correct thermal paper with its coated side facing the heating element; Clean the approved feed path and heating element per the printer's maintenance instructions; and keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Replace the spent ink ribbon before changing the printer controller; Clean the approved feed path and heating element per the printer's maintenance instructions; and keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Reload the correct thermal paper with its coated side facing the heating element; replace the spent ink ribbon before changing the printer controller; and keep an appropriate impact printer with a correctly installed ribbon for multipart output.
- Reload the correct thermal paper with its coated side facing the heating element; Clean the approved feed path and heating element per the printer's maintenance instructions; and replace the spent ink ribbon before changing the printer controller.
Explanation
Correct Answer
A:For ticket (1), Direct thermal printing relies on heat-sensitive coating positioned against the printhead. For ticket (2), Label adhesive and dust can impair thermal transfer and media movement. For ticket (3), Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing.
Incorrect Answers
B:For ticket 1, reload the correct thermal paper with its coated side facing the heating element. Direct thermal printing relies on heat-sensitive coating positioned against the printhead.
C:For ticket 2, clean the approved feed path and heating element per the printer's maintenance instructions. Label adhesive and dust can impair thermal transfer and media movement.
D:For ticket 3, keep an appropriate impact printer with a correctly installed ribbon for multipart output. Mechanical impact can transfer pressure through multiple form layers, unlike standard thermal printing.
Question 199
A device support specialist must respond to this request: A large house needs a wireless network that reaches distant rooms through several walls, but neighboring radios create congestion. Which next step MOST directly resolves the reported condition?
- Evaluate the longer reach of 2.4 GHz while selecting cleaner channels and addressing interference.
- Prefer the 5 GHz band with appropriate channel and power planning for compatible clients.
- Verify 6 GHz radio support and compatible security modes on client and access point.
- Review access point placement and survey signal strength rather than assuming maximum transmit speed ensures coverage.
Explanation
Correct Answer
A:Lower wireless frequencies generally propagate farther through obstacles but often share crowded spectrum.
Incorrect Answers
B:Five-gigahertz Wi-Fi commonly offers more channel choices with reduced range relative to 2.4 GHz; lower wireless frequencies generally propagate farther through obstacles but often share crowded spectrum.
C:The 6 GHz band requires compatible radio hardware; Wi-Fi generations and band capabilities are not interchangeable; lower wireless frequencies generally propagate farther through obstacles but often share crowded spectrum.
D:Obstructions and radio propagation determine usable service independently of a product's peak advertised rate; lower wireless frequencies generally propagate farther through obstacles but often share crowded spectrum.
Question 200
An end user reports the following condition: A crowded office wants higher throughput on compatible nearby devices and can tolerate shorter reach through thick walls. What should the support specialist recommend FIRST within the stated limits?
- Evaluate the longer reach of 2.4 GHz while selecting cleaner channels and addressing interference.
- Prefer the 5 GHz band with appropriate channel and power planning for compatible clients.
- Verify 6 GHz radio support and compatible security modes on client and access point.
- Review access point placement and survey signal strength rather than assuming maximum transmit speed ensures coverage.
Explanation
Correct Answer
B:Five-gigahertz Wi-Fi commonly offers more channel choices with reduced range relative to 2.4 GHz.
Incorrect Answers
A:Lower wireless frequencies generally propagate farther through obstacles but often share crowded spectrum; five-gigahertz Wi-Fi commonly offers more channel choices with reduced range relative to 2.4 GHz.
C:The 6 GHz band requires compatible radio hardware; Wi-Fi generations and band capabilities are not interchangeable; five-gigahertz Wi-Fi commonly offers more channel choices with reduced range relative to 2.4 GHz.
D:Obstructions and radio propagation determine usable service independently of a product's peak advertised rate; five-gigahertz Wi-Fi commonly offers more channel choices with reduced range relative to 2.4 GHz.
CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests