Question 650
During a change at Coastal Operations, engineers have selected RESTCONF resource read because they need to interpret a GET /restconf/data/... response containing modeled interface status. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Identify the operation as reading configuration from the selected datastore.
- Treat the edit as rejected and inspect detailed error metadata.
- Disable the modelled uplink and observe convergence in the simulation.
- Identify the response as YANG-derived device data for the requested path.
Explanation
Correct Answer
D:This action implements RESTCONF resource read in the stated environment. To interpret a GET /restconf/data/... response containing modeled interface status, engineers should identify the response as YANG-derived device data for the requested path; the corresponding acceptance condition is that the state contains nodes matching the advertised model hierarchy.
Incorrect Answers
A:This engineering action belongs to NETCONF get-config retrieval, where the purpose is to interpret an RPC envelope containing get-config for running datastore. Implementing it would not establish RESTCONF resource read for the stated requirement to interpret a GET /restconf/data/... response containing modeled interface status.
B:This engineering action belongs to NETCONF edit-config validation, where the purpose is to interpret a response containing an rpc-error for an invalid YANG leaf update. Implementing it would not establish RESTCONF resource read for the stated requirement to interpret a GET /restconf/data/... response containing modeled interface status.
C:This engineering action belongs to CML link-failure exercise, where the purpose is to simulate an uplink outage during a service topology review. Implementing it would not establish RESTCONF resource read for the stated requirement to interpret a GET /restconf/data/... response containing modeled interface status.
Question 651
Ridgewell Research has implemented RESTCONF resource read by taking this action: identify the response as YANG-derived device data for the requested path. For the requirement to interpret a GET /restconf/data/... response containing modeled interface status, which actual observation most directly verifies the desired result?
- The state contains nodes matching the advertised model hierarchy.
- The XML reply contains the targeted configuration subtree.
- The operator can distinguish validation failure from successful commit.
- Alternate routes appear when the scenario is designed for redundancy.
Explanation
Correct Answer
A:The observation that the state contains nodes matching the advertised model hierarchy is tied to the stated implementation of RESTCONF resource read. It tests the requested outcome of interpret a GET /restconf/data/... response containing modeled interface status instead of merely checking an unrelated component.
Incorrect Answers
B:This observation evaluates NETCONF get-config retrieval, which targets the distinct requirement to interpret an RPC envelope containing get-config for running datastore. It therefore fails to validate the stated RESTCONF resource read outcome: the state contains nodes matching the advertised model hierarchy.
C:This observation evaluates NETCONF edit-config validation, which targets the distinct requirement to interpret a response containing an rpc-error for an invalid YANG leaf update. It therefore fails to validate the stated RESTCONF resource read outcome: the state contains nodes matching the advertised model hierarchy.
D:This observation evaluates CML link-failure exercise, which targets the distinct requirement to simulate an uplink outage during a service topology review. It therefore fails to validate the stated RESTCONF resource read outcome: the state contains nodes matching the advertised model hierarchy.
Question 652
In Linden Health's production-readiness review, RESTCONF resource read was selected to interpret a GET /restconf/data/... response containing modeled interface status. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- Get-config does not modify running configuration.
- RESTCONF body cannot be assumed to be raw CLI output.
- An error response should not be treated as a harmless empty result.
- Simulated convergence does not certify production hardware forwarding performance.
Explanation
Correct Answer
B:For RESTCONF resource read, the pertinent residual constraint is that RESTCONF body cannot be assumed to be raw CLI output. The implementation may satisfy interpret a GET /restconf/data/... response containing modeled interface status, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with NETCONF get-config retrieval and its separate need to interpret an RPC envelope containing get-config for running datastore. It is not the most direct operational boundary for the selected RESTCONF resource read, whose relevant risk is that RESTCONF body cannot be assumed to be raw CLI output.
C:This limitation is associated with NETCONF edit-config validation and its separate need to interpret a response containing an rpc-error for an invalid YANG leaf update. It is not the most direct operational boundary for the selected RESTCONF resource read, whose relevant risk is that RESTCONF body cannot be assumed to be raw CLI output.
D:This limitation is associated with CML link-failure exercise and its separate need to simulate an uplink outage during a service topology review. It is not the most direct operational boundary for the selected RESTCONF resource read, whose relevant risk is that RESTCONF body cannot be assumed to be raw CLI output.
Question 653
Pioneer Energy needs to interpret a model declaring a list with a key leaf for interfaces. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- YANG config false state
- Postchange verification stage
- Declarative device intent
- YANG list key uniqueness
Explanation
Correct Answer
D:YANG list key uniqueness is the suitable approach here: ensure each list instance is distinguished by its key value. It addresses the requirement to interpret a model declaring a list with a key leaf for interfaces; acceptance can be checked when a modeled list supports addressing specific entries by key.
Incorrect Answers
A:YANG config false state addresses another requirement, namely to interpret a model leaf marked config false. A typical way to do this is to treat the node as operational state rather than writable configuration; it does not directly address the stated need to interpret a model declaring a list with a key leaf for interfaces.
B:Postchange verification stage addresses another requirement, namely to detect devices that did not accept the intended configuration. A typical way to do this is to collect device operational state after deployment and assert acceptance conditions; it does not directly address the stated need to interpret a model declaring a list with a key leaf for interfaces.
C:Declarative device intent addresses another requirement, namely to keep configuration automation consistent across multiple supported vendor targets. A typical way to do this is to model the desired outcome and let a controller reconcile supported device configuration; it does not directly address the stated need to interpret a model declaring a list with a key leaf for interfaces.
Question 654
During a change at Brookfield Systems, engineers have selected YANG list key uniqueness because they need to interpret a model declaring a list with a key leaf for interfaces. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Ensure each list instance is distinguished by its key value.
- Treat the node as operational state rather than writable configuration.
- Collect device operational state after deployment and assert acceptance conditions.
- Model the desired outcome and let a controller reconcile supported device configuration.
Explanation
Correct Answer
A:This action implements YANG list key uniqueness in the stated environment. To interpret a model declaring a list with a key leaf for interfaces, engineers should ensure each list instance is distinguished by its key value; the corresponding acceptance condition is that a modeled list supports addressing specific entries by key.
Incorrect Answers
B:This engineering action belongs to YANG config false state, where the purpose is to interpret a model leaf marked config false. Implementing it would not establish YANG list key uniqueness for the stated requirement to interpret a model declaring a list with a key leaf for interfaces.
C:This engineering action belongs to Postchange verification stage, where the purpose is to detect devices that did not accept the intended configuration. Implementing it would not establish YANG list key uniqueness for the stated requirement to interpret a model declaring a list with a key leaf for interfaces.
D:This engineering action belongs to Declarative device intent, where the purpose is to keep configuration automation consistent across multiple supported vendor targets. Implementing it would not establish YANG list key uniqueness for the stated requirement to interpret a model declaring a list with a key leaf for interfaces.
Question 655
Arbor Financial has implemented YANG list key uniqueness by taking this action: ensure each list instance is distinguished by its key value. For the requirement to interpret a model declaring a list with a key leaf for interfaces, which actual observation most directly verifies the desired result?
- Read access works but configuration edit to that leaf is not accepted.
- A modeled list supports addressing specific entries by key.
- The pipeline marks a deployment incomplete when a target differs.
- Repeat execution converges toward the same intended configuration.
Explanation
Correct Answer
B:The observation that a modeled list supports addressing specific entries by key is tied to the stated implementation of YANG list key uniqueness. It tests the requested outcome of interpret a model declaring a list with a key leaf for interfaces instead of merely checking an unrelated component.
Incorrect Answers
A:This observation evaluates YANG config false state, which targets the distinct requirement to interpret a model leaf marked config false. It therefore fails to validate the stated YANG list key uniqueness outcome: a modeled list supports addressing specific entries by key.
C:This observation evaluates Postchange verification stage, which targets the distinct requirement to detect devices that did not accept the intended configuration. It therefore fails to validate the stated YANG list key uniqueness outcome: a modeled list supports addressing specific entries by key.
D:This observation evaluates Declarative device intent, which targets the distinct requirement to keep configuration automation consistent across multiple supported vendor targets. It therefore fails to validate the stated YANG list key uniqueness outcome: a modeled list supports addressing specific entries by key.
Question 656
In Keystone Media's production-readiness review, YANG list key uniqueness was selected to interpret a model declaring a list with a key leaf for interfaces. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- Read-only operational state cannot be made editable by changing HTTP method.
- A green API submission code alone cannot certify downstream device state.
- List keys are data model identifiers, not necessarily switch forwarding identifiers.
- A model cannot make unsupported device features available.
Explanation
Correct Answer
C:For YANG list key uniqueness, the pertinent residual constraint is that list keys are data model identifiers, not necessarily switch forwarding identifiers. The implementation may satisfy interpret a model declaring a list with a key leaf for interfaces, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with YANG config false state and its separate need to interpret a model leaf marked config false. It is not the most direct operational boundary for the selected YANG list key uniqueness, whose relevant risk is that list keys are data model identifiers, not necessarily switch forwarding identifiers.
B:This limitation is associated with Postchange verification stage and its separate need to detect devices that did not accept the intended configuration. It is not the most direct operational boundary for the selected YANG list key uniqueness, whose relevant risk is that list keys are data model identifiers, not necessarily switch forwarding identifiers.
D:This limitation is associated with Declarative device intent and its separate need to keep configuration automation consistent across multiple supported vendor targets. It is not the most direct operational boundary for the selected YANG list key uniqueness, whose relevant risk is that list keys are data model identifiers, not necessarily switch forwarding identifiers.
Question 657
Willow Data needs to interpret a model leaf marked config false. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- YANG config false state
- YANG list key uniqueness
- Bash exit-status branch
- Ansible service state
Explanation
Correct Answer
A:YANG config false state is the suitable approach here: treat the node as operational state rather than writable configuration. It addresses the requirement to interpret a model leaf marked config false; acceptance can be checked when read access works but configuration edit to that leaf is not accepted.
Incorrect Answers
B:YANG list key uniqueness addresses another requirement, namely to interpret a model declaring a list with a key leaf for interfaces. A typical way to do this is to ensure each list instance is distinguished by its key value; it does not directly address the stated need to interpret a model leaf marked config false.
C:Bash exit-status branch addresses another requirement, namely to interpret a script that uses if command; then ... else ... fi. A typical way to do this is to predict branch selection from the command's exit status; it does not directly address the stated need to interpret a model leaf marked config false.
D:Ansible service state addresses another requirement, namely to read a playbook that uses a service module with state started. A typical way to do this is to predict that the target service will be started if it was stopped; it does not directly address the stated need to interpret a model leaf marked config false.
Question 658
During a change at Meridian Transit, engineers have selected YANG config false state because they need to interpret a model leaf marked config false. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Ensure each list instance is distinguished by its key value.
- Treat the node as operational state rather than writable configuration.
- Predict branch selection from the command's exit status.
- Predict that the target service will be started if it was stopped.
Explanation
Correct Answer
B:This action implements YANG config false state in the stated environment. To interpret a model leaf marked config false, engineers should treat the node as operational state rather than writable configuration; the corresponding acceptance condition is that read access works but configuration edit to that leaf is not accepted.
Incorrect Answers
A:This engineering action belongs to YANG list key uniqueness, where the purpose is to interpret a model declaring a list with a key leaf for interfaces. Implementing it would not establish YANG config false state for the stated requirement to interpret a model leaf marked config false.
C:This engineering action belongs to Bash exit-status branch, where the purpose is to interpret a script that uses if command; then ... else ... fi. Implementing it would not establish YANG config false state for the stated requirement to interpret a model leaf marked config false.
D:This engineering action belongs to Ansible service state, where the purpose is to read a playbook that uses a service module with state started. Implementing it would not establish YANG config false state for the stated requirement to interpret a model leaf marked config false.
Question 659
Atlas Retail has implemented YANG config false state by taking this action: treat the node as operational state rather than writable configuration. For the requirement to interpret a model leaf marked config false, which actual observation most directly verifies the desired result?
- A modeled list supports addressing specific entries by key.
- The success branch runs only when the tested command exits zero.
- Read access works but configuration edit to that leaf is not accepted.
- The service is running after supported module execution.
Explanation
Correct Answer
C:The observation that read access works but configuration edit to that leaf is not accepted is tied to the stated implementation of YANG config false state. It tests the requested outcome of interpret a model leaf marked config false instead of merely checking an unrelated component.
Incorrect Answers
A:This observation evaluates YANG list key uniqueness, which targets the distinct requirement to interpret a model declaring a list with a key leaf for interfaces. It therefore fails to validate the stated YANG config false state outcome: read access works but configuration edit to that leaf is not accepted.
B:This observation evaluates Bash exit-status branch, which targets the distinct requirement to interpret a script that uses if command; then ... else ... fi. It therefore fails to validate the stated YANG config false state outcome: read access works but configuration edit to that leaf is not accepted.
D:This observation evaluates Ansible service state, which targets the distinct requirement to read a playbook that uses a service module with state started. It therefore fails to validate the stated YANG config false state outcome: read access works but configuration edit to that leaf is not accepted.
Question 660
In Coastal Operations's production-readiness review, YANG config false state was selected to interpret a model leaf marked config false. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- List keys are data model identifiers, not necessarily switch forwarding identifiers.
- Exit status is not the same as parsing arbitrary stdout text.
- Starting a service is not identical to enabling it at boot.
- Read-only operational state cannot be made editable by changing HTTP method.
Explanation
Correct Answer
D:For YANG config false state, the pertinent residual constraint is that read-only operational state cannot be made editable by changing HTTP method. The implementation may satisfy interpret a model leaf marked config false, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with YANG list key uniqueness and its separate need to interpret a model declaring a list with a key leaf for interfaces. It is not the most direct operational boundary for the selected YANG config false state, whose relevant risk is that read-only operational state cannot be made editable by changing HTTP method.
B:This limitation is associated with Bash exit-status branch and its separate need to interpret a script that uses if command; then ... else ... fi. It is not the most direct operational boundary for the selected YANG config false state, whose relevant risk is that read-only operational state cannot be made editable by changing HTTP method.
C:This limitation is associated with Ansible service state and its separate need to read a playbook that uses a service module with state started. It is not the most direct operational boundary for the selected YANG config false state, whose relevant risk is that read-only operational state cannot be made editable by changing HTTP method.
DevNet Associate (DEVASC) (200-901) Practice Tests