Question 300
In Evergreen Labs's production-readiness review, Catalyst Center authentication was selected to obtain an API access token before issuing authenticated Intent API requests. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- Controller availability does not prove all edges have installed a change.
- Token generation is distinct from assuming each inventory call accepts raw username/password.
- A service model still requires validation of device capabilities and commits.
- An inventory endpoint does not directly apply new configuration to switches.
Explanation
Correct Answer
B:For Catalyst Center authentication, the pertinent residual constraint is that token generation is distinct from assuming each inventory call accepts raw username/password. The implementation may satisfy obtain an API access token before issuing authenticated Intent API requests, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with Cisco Catalyst SD-WAN control-plane management and its separate need to manage distributed SD-WAN policy using the centralized controller API. It is not the most direct operational boundary for the selected Catalyst Center authentication, whose relevant risk is that token generation is distinct from assuming each inventory call accepts raw username/password.
C:This limitation is associated with NSO service orchestration and its separate need to coordinate a service change across multiple vendor devices with rollback-aware transactions. It is not the most direct operational boundary for the selected Catalyst Center authentication, whose relevant risk is that token generation is distinct from assuming each inventory call accepts raw username/password.
D:This limitation is associated with Catalyst Center inventory query and its separate need to collect the managed device list rather than configuring individual devices. It is not the most direct operational boundary for the selected Catalyst Center authentication, whose relevant risk is that token generation is distinct from assuming each inventory call accepts raw username/password.
Question 301
Meridian Transit needs to find connected client records associated with one Meraki network. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- Catalyst Center inventory query
- Catalyst Center authentication
- ACI model-driven policy
- Meraki network clients listing
Explanation
Correct Answer
D:Meraki network clients listing is the suitable approach here: use the documented network-client collection API rather than a device configuration PUT. It addresses the requirement to find connected client records associated with one Meraki network; acceptance can be checked when the response contains recently observed client identifiers and attributes.
Incorrect Answers
A:Catalyst Center inventory query addresses another requirement, namely to collect the managed device list rather than configuring individual devices. A typical way to do this is to send GET to the documented /dna/intent/api/v1/network-device with valid X-Auth-Token; it does not directly address the stated need to find connected client records associated with one Meraki network.
B:Catalyst Center authentication addresses another requirement, namely to obtain an API access token before issuing authenticated Intent API requests. A typical way to do this is to POST to the documented token endpoint with allowed credentials and use returned token; it does not directly address the stated need to find connected client records associated with one Meraki network.
C:ACI model-driven policy addresses another requirement, namely to apply endpoint-group policy through the ACI controller model rather than CLI on every switch. A typical way to do this is to use the APIC policy object model and its documented REST interface; it does not directly address the stated need to find connected client records associated with one Meraki network.
Question 302
During a change at Atlas Retail, engineers have selected Meraki network clients listing because they need to find connected client records associated with one Meraki network. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Use the documented network-client collection API rather than a device configuration PUT.
- Send GET to the documented /dna/intent/api/v1/network-device with valid X-Auth-Token.
- POST to the documented token endpoint with allowed credentials and use returned token.
- Use the APIC policy object model and its documented REST interface.
Explanation
Correct Answer
A:This action implements Meraki network clients listing in the stated environment. To find connected client records associated with one Meraki network, engineers should use the documented network-client collection API rather than a device configuration PUT; the corresponding acceptance condition is that the response contains recently observed client identifiers and attributes.
Incorrect Answers
B:This engineering action belongs to Catalyst Center inventory query, where the purpose is to collect the managed device list rather than configuring individual devices. Implementing it would not establish Meraki network clients listing for the stated requirement to find connected client records associated with one Meraki network.
C:This engineering action belongs to Catalyst Center authentication, where the purpose is to obtain an API access token before issuing authenticated Intent API requests. Implementing it would not establish Meraki network clients listing for the stated requirement to find connected client records associated with one Meraki network.
D:This engineering action belongs to ACI model-driven policy, where the purpose is to apply endpoint-group policy through the ACI controller model rather than CLI on every switch. Implementing it would not establish Meraki network clients listing for the stated requirement to find connected client records associated with one Meraki network.
Question 303
Coastal Operations has implemented Meraki network clients listing by taking this action: use the documented network-client collection API rather than a device configuration PUT. For the requirement to find connected client records associated with one Meraki network, which actual observation most directly verifies the desired result?
- The JSON response collection includes the managed device records.
- The response contains recently observed client identifiers and attributes.
- Later device-inventory calls include the expected X-Auth-Token header.
- The APIC records a fabric policy object with a defined tenant and scope.
Explanation
Correct Answer
B:The observation that the response contains recently observed client identifiers and attributes is tied to the stated implementation of Meraki network clients listing. It tests the requested outcome of find connected client records associated with one Meraki network instead of merely checking an unrelated component.
Incorrect Answers
A:This observation evaluates Catalyst Center inventory query, which targets the distinct requirement to collect the managed device list rather than configuring individual devices. It therefore fails to validate the stated Meraki network clients listing outcome: the response contains recently observed client identifiers and attributes.
C:This observation evaluates Catalyst Center authentication, which targets the distinct requirement to obtain an API access token before issuing authenticated Intent API requests. It therefore fails to validate the stated Meraki network clients listing outcome: the response contains recently observed client identifiers and attributes.
D:This observation evaluates ACI model-driven policy, which targets the distinct requirement to apply endpoint-group policy through the ACI controller model rather than CLI on every switch. It therefore fails to validate the stated Meraki network clients listing outcome: the response contains recently observed client identifiers and attributes.
Question 304
In Ridgewell Research's production-readiness review, Meraki network clients listing was selected to find connected client records associated with one Meraki network. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- An inventory endpoint does not directly apply new configuration to switches.
- Token generation is distinct from assuming each inventory call accepts raw username/password.
- Observed clients do not prove devices are currently reachable or authorized.
- APIC policy intent must still be verified against deployed fabric operational state.
Explanation
Correct Answer
C:For Meraki network clients listing, the pertinent residual constraint is that observed clients do not prove devices are currently reachable or authorized. The implementation may satisfy find connected client records associated with one Meraki network, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with Catalyst Center inventory query and its separate need to collect the managed device list rather than configuring individual devices. It is not the most direct operational boundary for the selected Meraki network clients listing, whose relevant risk is that observed clients do not prove devices are currently reachable or authorized.
B:This limitation is associated with Catalyst Center authentication and its separate need to obtain an API access token before issuing authenticated Intent API requests. It is not the most direct operational boundary for the selected Meraki network clients listing, whose relevant risk is that observed clients do not prove devices are currently reachable or authorized.
D:This limitation is associated with ACI model-driven policy and its separate need to apply endpoint-group policy through the ACI controller model rather than CLI on every switch. It is not the most direct operational boundary for the selected Meraki network clients listing, whose relevant risk is that observed clients do not prove devices are currently reachable or authorized.
Question 305
Summit University needs to apply endpoint-group policy through the ACI controller model rather than CLI on every switch. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- ACI model-driven policy
- Catalyst Center inventory query
- Meraki network clients listing
- Catalyst Center authentication
Explanation
Correct Answer
A:ACI model-driven policy is the suitable approach here: use the APIC policy object model and its documented REST interface. It addresses the requirement to apply endpoint-group policy through the ACI controller model rather than CLI on every switch; acceptance can be checked when the APIC records a fabric policy object with a defined tenant and scope.
Incorrect Answers
B:Catalyst Center inventory query addresses another requirement, namely to collect the managed device list rather than configuring individual devices. A typical way to do this is to send GET to the documented /dna/intent/api/v1/network-device with valid X-Auth-Token; it does not directly address the stated need to apply endpoint-group policy through the ACI controller model rather than CLI on every switch.
C:Meraki network clients listing addresses another requirement, namely to find connected client records associated with one Meraki network. A typical way to do this is to use the documented network-client collection API rather than a device configuration PUT; it does not directly address the stated need to apply endpoint-group policy through the ACI controller model rather than CLI on every switch.
D:Catalyst Center authentication addresses another requirement, namely to obtain an API access token before issuing authenticated Intent API requests. A typical way to do this is to POST to the documented token endpoint with allowed credentials and use returned token; it does not directly address the stated need to apply endpoint-group policy through the ACI controller model rather than CLI on every switch.
Question 306
During a change at Pioneer Energy, engineers have selected ACI model-driven policy because they need to apply endpoint-group policy through the ACI controller model rather than CLI on every switch. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- Send GET to the documented /dna/intent/api/v1/network-device with valid X-Auth-Token.
- Use the APIC policy object model and its documented REST interface.
- Use the documented network-client collection API rather than a device configuration PUT.
- POST to the documented token endpoint with allowed credentials and use returned token.
Explanation
Correct Answer
B:This action implements ACI model-driven policy in the stated environment. To apply endpoint-group policy through the ACI controller model rather than CLI on every switch, engineers should use the APIC policy object model and its documented REST interface; the corresponding acceptance condition is that the APIC records a fabric policy object with a defined tenant and scope.
Incorrect Answers
A:This engineering action belongs to Catalyst Center inventory query, where the purpose is to collect the managed device list rather than configuring individual devices. Implementing it would not establish ACI model-driven policy for the stated requirement to apply endpoint-group policy through the ACI controller model rather than CLI on every switch.
C:This engineering action belongs to Meraki network clients listing, where the purpose is to find connected client records associated with one Meraki network. Implementing it would not establish ACI model-driven policy for the stated requirement to apply endpoint-group policy through the ACI controller model rather than CLI on every switch.
D:This engineering action belongs to Catalyst Center authentication, where the purpose is to obtain an API access token before issuing authenticated Intent API requests. Implementing it would not establish ACI model-driven policy for the stated requirement to apply endpoint-group policy through the ACI controller model rather than CLI on every switch.
Question 307
Brookfield Systems has implemented ACI model-driven policy by taking this action: use the APIC policy object model and its documented REST interface. For the requirement to apply endpoint-group policy through the ACI controller model rather than CLI on every switch, which actual observation most directly verifies the desired result?
- The JSON response collection includes the managed device records.
- The response contains recently observed client identifiers and attributes.
- The APIC records a fabric policy object with a defined tenant and scope.
- Later device-inventory calls include the expected X-Auth-Token header.
Explanation
Correct Answer
C:The observation that the APIC records a fabric policy object with a defined tenant and scope is tied to the stated implementation of ACI model-driven policy. It tests the requested outcome of apply endpoint-group policy through the ACI controller model rather than CLI on every switch instead of merely checking an unrelated component.
Incorrect Answers
A:This observation evaluates Catalyst Center inventory query, which targets the distinct requirement to collect the managed device list rather than configuring individual devices. It therefore fails to validate the stated ACI model-driven policy outcome: the APIC records a fabric policy object with a defined tenant and scope.
B:This observation evaluates Meraki network clients listing, which targets the distinct requirement to find connected client records associated with one Meraki network. It therefore fails to validate the stated ACI model-driven policy outcome: the APIC records a fabric policy object with a defined tenant and scope.
D:This observation evaluates Catalyst Center authentication, which targets the distinct requirement to obtain an API access token before issuing authenticated Intent API requests. It therefore fails to validate the stated ACI model-driven policy outcome: the APIC records a fabric policy object with a defined tenant and scope.
Question 308
In Arbor Financial's production-readiness review, ACI model-driven policy was selected to apply endpoint-group policy through the ACI controller model rather than CLI on every switch. Even if the expected outcome appears correct, which explicitly relevant limitation must the team include in its rollout and monitoring plan?
- An inventory endpoint does not directly apply new configuration to switches.
- Observed clients do not prove devices are currently reachable or authorized.
- Token generation is distinct from assuming each inventory call accepts raw username/password.
- APIC policy intent must still be verified against deployed fabric operational state.
Explanation
Correct Answer
D:For ACI model-driven policy, the pertinent residual constraint is that APIC policy intent must still be verified against deployed fabric operational state. The implementation may satisfy apply endpoint-group policy through the ACI controller model rather than CLI on every switch, but this boundary must still be handled in operations.
Incorrect Answers
A:This limitation is associated with Catalyst Center inventory query and its separate need to collect the managed device list rather than configuring individual devices. It is not the most direct operational boundary for the selected ACI model-driven policy, whose relevant risk is that APIC policy intent must still be verified against deployed fabric operational state.
B:This limitation is associated with Meraki network clients listing and its separate need to find connected client records associated with one Meraki network. It is not the most direct operational boundary for the selected ACI model-driven policy, whose relevant risk is that APIC policy intent must still be verified against deployed fabric operational state.
C:This limitation is associated with Catalyst Center authentication and its separate need to obtain an API access token before issuing authenticated Intent API requests. It is not the most direct operational boundary for the selected ACI model-driven policy, whose relevant risk is that APIC policy intent must still be verified against deployed fabric operational state.
Question 309
Northstar Logistics needs to manage distributed SD-WAN policy using the centralized controller API. The implementation team is comparing methods that address different problems in its Cisco-automation environment. Which technical approach directly satisfies the stated requirement?
- Catalyst Center authentication
- Cisco Catalyst SD-WAN control-plane management
- Catalyst Center inventory query
- Meraki network clients listing
Explanation
Correct Answer
B:Cisco Catalyst SD-WAN control-plane management is the suitable approach here: address documented Catalyst SD-WAN Manager APIs for policy and inventory. It addresses the requirement to manage distributed SD-WAN policy using the centralized controller API; acceptance can be checked when the manager exposes centrally tracked policy and device state.
Incorrect Answers
A:Catalyst Center authentication addresses another requirement, namely to obtain an API access token before issuing authenticated Intent API requests. A typical way to do this is to POST to the documented token endpoint with allowed credentials and use returned token; it does not directly address the stated need to manage distributed SD-WAN policy using the centralized controller API.
C:Catalyst Center inventory query addresses another requirement, namely to collect the managed device list rather than configuring individual devices. A typical way to do this is to send GET to the documented /dna/intent/api/v1/network-device with valid X-Auth-Token; it does not directly address the stated need to manage distributed SD-WAN policy using the centralized controller API.
D:Meraki network clients listing addresses another requirement, namely to find connected client records associated with one Meraki network. A typical way to do this is to use the documented network-client collection API rather than a device configuration PUT; it does not directly address the stated need to manage distributed SD-WAN policy using the centralized controller API.
Question 310
During a change at Willow Data, engineers have selected Cisco Catalyst SD-WAN control-plane management because they need to manage distributed SD-WAN policy using the centralized controller API. Which concrete engineering action must be taken to implement the selected approach, rather than one of the nearby but different designs?
- POST to the documented token endpoint with allowed credentials and use returned token.
- Send GET to the documented /dna/intent/api/v1/network-device with valid X-Auth-Token.
- Address documented Catalyst SD-WAN Manager APIs for policy and inventory.
- Use the documented network-client collection API rather than a device configuration PUT.
Explanation
Correct Answer
C:This action implements Cisco Catalyst SD-WAN control-plane management in the stated environment. To manage distributed SD-WAN policy using the centralized controller API, engineers should address documented Catalyst SD-WAN Manager APIs for policy and inventory; the corresponding acceptance condition is that the manager exposes centrally tracked policy and device state.
Incorrect Answers
A:This engineering action belongs to Catalyst Center authentication, where the purpose is to obtain an API access token before issuing authenticated Intent API requests. Implementing it would not establish Cisco Catalyst SD-WAN control-plane management for the stated requirement to manage distributed SD-WAN policy using the centralized controller API.
B:This engineering action belongs to Catalyst Center inventory query, where the purpose is to collect the managed device list rather than configuring individual devices. Implementing it would not establish Cisco Catalyst SD-WAN control-plane management for the stated requirement to manage distributed SD-WAN policy using the centralized controller API.
D:This engineering action belongs to Meraki network clients listing, where the purpose is to find connected client records associated with one Meraki network. Implementing it would not establish Cisco Catalyst SD-WAN control-plane management for the stated requirement to manage distributed SD-WAN policy using the centralized controller API.
DevNet Associate (DEVASC) (200-901) Practice Tests