Mark from Netherlands - Jun 25, 2013Report Spam Passed last friday with 907. Sims still the same, ACL2, EIGRP and VTP.
EIGRP the id's can be changed but the technique is the same as explained on 9tut
VTP were 5 questions but the same questions from 9tut.
ACL2 make sure you check the modifications. They made a combination last friday 4 rules and only 3 able to make so the thing was to combine 2 rules together.
Check http://www.9tut.com and this dump is still vallid!!!
anon from United States - May 16, 2013Report Spam Passed today with 920. Sims are ACL2, EIGRP and VTP. For ACL2 make sure you check the modifications. I had the Host B version. Check http://www.9tut.com
dacs from Hungary - Apr 22, 2013Report Spam I have passed ccna last week, i'd got 973 points. Four questions not from this pool. Labs: Acl2, vtp, eigrp. I've used this dump and 9tut.
Jelena - Apr 12, 2013Report Spam Hi, I have passed CCNA week ago, with score 1000/1000 :)
Exam was easy, all questions known, labs were ACL2, EIGRP and VTP.
I've used this dump and Spike, they are valid, but be sure that you understand all concepts! Be calm and careful, and there is enough time for everything in the exam
Thanks a lot to 9tut and examcollection!!!
Good luck to all of you
is ter any passive interface in the eigrp configurations
aaaaa from United States - Mar 19, 2013Report Spam 95% accurate, passed on march 18 with 933/1000, one question not from this pool. 3 labs from 9 tut vtp acl2 and eigrp. thx
Anthony Anyoti from Zambia - Mar 16, 2013Report Spam Thank you Lord! I passed today with 907 points. Acme dump is valid. Sims were VTP, ACL2 and EIGRP-minor changes in IP addressing and AS number..but all in all the same. Would like to say a BIG THANKYOU to all and 9tut..CCNP here I come..;)
luke from Luxembourg - Mar 16, 2013Report Spam Something new as a question, but it is still a valid dump! Used it with certkey 680q.
Mehdi from Morocco - Mar 15, 2013Report Spam @ Ibrahim-abo abdullah
WAN ip's are not in the same subnet
HQ wan ip is on subnet 192.168.10.84 SO available adresse is .85 and .86
Ibrahim-abo abdullah from United Arab Emirates - Mar 15, 2013Report Spam Please help me to found answer for this question
the question in this url
alaa from Egypt - Mar 13, 2013Report Spam i'm pass today this dump is valid
Yan Myo Naing from Myanmar - Mar 09, 2013Report Spam Sorry for my fault with certkey & Pass4Sure, I'm used the certkey, Acme's Actual Test, SIM from 9tut. Thanks to Acme & certkey, 9tut Also. I'm Pass the Test with "920 Pt" In Myanmar Inspiration Exam Center.I'm Think Acme's ActualTest File is 100% Valid in Drag & Drop. certkey is more accurate on other question type.
Yan Myo Naing from Myanmar - Mar 09, 2013Report Spam Thanks to Acme & Pass4Sure, 9tut Also. I'm Pass the Test with "920 Pt" In Myanmar Inspiration Exam Center.I'm Think This Dump is 95% Valid, but Drag & Drop were Useful and "100%" Valid. Pass4Sure is more accurate on other question type.
maxnanabas09 from Philippines - Mar 06, 2013Report Spam passed today with 973 points
this dump is really valid, but there is 3 new question but its really easy
-ACL2 was from 9tut and its really same, changes is only from host and IP
-VTP is also from 9tut with minor changes
-EIGRP was also from 9tut, i removed incorrect AS from R3 then add the correct one, and from main router, I removed the phantom network and replaced it with the correct one.
Study materials that I used are: CBTNuggets(Jeremy C.), Sekhar dump, brar dump, Acme dump, and 9Tut for sims
stevens from United States - Mar 04, 2013Report Spam People passed the test !!!! No one mentioned where their majority of questions came up on the test. Please inform !!!!
Ahmed Talal from Egypt - Feb 25, 2013Report Spam Valid 100 % ... pass 2day without new q ... laps VTP . EIGRP .. ACL2 .. some changes in ACL2 but easy ... good luck all :) :)
Jeff from Philippines - Feb 22, 2013Report Spam Passed today of score 933/1000. Sims we're ACL, VTP and EIGRP.
most of the questions were in this dump only 2 to 3 questions weren't.
Andrew from Italy - Feb 20, 2013Report Spam are being prepared and I'm using this .vce, but I would understand how it is calculated the score in real exam, because in this sim, in answering multiple-choice if one in three is wrong, give me the whole answer wrong and does not calculate any score .. does not make sense ..
Amit Sharma from India - Feb 17, 2013Report Spam I passed with 961/1000. this dump is 100% valid. only 3 questions were out of dumps. I really dont remember 1 is about frame-relay, 2nd dhcp, 3rd vlan. I took the exam on 15th feb 2013. thanks guys.
d3nn from Bolivia - Feb 07, 2013Report Spam I passed, many thanks acme676, this dump helped me.
dan from United States - Feb 07, 2013Report Spam Pass today with this dump..sims..VTP EIGRP ACL2
Arvind Konar from United States - Feb 01, 2013Report Spam Hey Guys..im giving exam on 15th Feb..planing to do Acme 676 and 9tut labs.are there any new lab questions? Let me know..
Peter from Germany - Jan 31, 2013Report Spam Dumps are still valid, passed today 933/1000. Used only this and 9tut, sims were eigrp, acl2 and vtp (vtp had 5 questions). Also please consider that passing the exam and understanding is two different things. Learn wisely the material, and then learn how to pass the exam! good luck to all
phil from United Kingdom - Jan 28, 2013Report Spam Hi i'm looking for a new career and need advice do you need a microsoft background to be able to do cisco
also i have a copy of the todd lammel study guide 6th edition but does anybody know a free web site where i can do some labs??
Passed today with 947 marks...Got VTP, EIGRP and ACL from 9tut...Studied from CBT nuggets , Richard deal Book and certkey 680q,..practiced on packet tracer...A word of advice for confused guys...Study the concepts clearly and practice on simulator..Dont just jump to dumps..You will pass the exam but will not have knowledge to back that up...Remember repetition is the mother of all success!!!! Best of luck everyone..Thanks to ec and 9tut..Appreciate you time..
David from South Korea - Jan 28, 2013Report Spam I cleared at last saturday and still valid.
what are the changes in labs?
can you provide us with new changes
sonia from United Kingdom - Jan 27, 2013Report Spam I am not sure of the question number however the correct answer for question as below:
A new switch is being added to the River Campus LAN. You will work to complete this process by first configuring the building_210 switch with an IP address and default gateway. For the switch host address, you should use the last available IP address on the management subnet. In addition, the switch needs to be configured to be in the same VTP domain as the building_100 switch and also needs to be configured as a VTP client. Assume that the IP configuration and VTP configuration on building_100 are complete and correct.
The configuration of the router is not accessible for this exercise. You must accomplish the following tasks:
Determine and configure the IP host address of the new switch.
Determine and configure the default gateway of the new switch.
Determine and configure the correct VTP domain name for the new switch.
Configure the new switch as a VTP client.
As the switches are connected. do the folllowing:
1. go to switch of building_100 console and type show running confi commnd. the output of this command will show you the ip adress of the vlan1 and ip address of the default gateway.
2. i think the mamagement domain in this question refer to the vlan1 (the default vlan) so take the subnet of this ip address and find the last available ip address in that subnet.
3. assign it to vlan1 in switch_210 and add the same default gateway as switch_100.
4. Type command show vtp status in switch_100 and find its domain. go to switch_210 and type vtp domain domain_name command.
I believe this completes the configuration.
Ahmed.India from India - Jan 26, 2013Report Spam I cleared ccna at 24-1-2013. I used Cisco.ActualTests.640-802.v2012-12-18.by.Acme.676q.vce dump and 9tut sims. My sims are eigrp , vtp , acl2. I scored 925/1000.
Maverick from Germany - Jan 25, 2013Report Spam Dump still valid. Passed tody with 960/1000.
I had acl 2, eigrp and vtp.
VTP and EIGRP has some changes
I used 9tut and this .vce file.
Dhanuka from Sri Lanka - Jan 24, 2013Report Spam Cleared the CCNA today with 960 marks with my first attempt. Did only the certkey 680Q. It is still valid. 99% questions are same. Some modifications are in but the answers are same.:) . Labs are VTP, ACL2 and EIGRP. All labs and drag and drops are in the 9 tut.
A Gorohi from United States - Jan 24, 2013Report Spam Passing marks are 825/1000.
Ahmed from India - Jan 23, 2013Report Spam Passed today 987 of 1000.
I had acl 2, eigrp and vtp.
VTP has some changes
I used 9tut, certkey 680q and Deniel 663q
Meera from India - Jan 23, 2013Report Spam cleared CCNA on saturday. i followed certkey 680 & 9tut. got eigrp, acl2 & vtp sims. ip addresses were different. questns were easy. wat i wud like to suggest is study the dumps using vce app.one by one chapter. it'l be easy to understand & u can finish it in 1 week. all the best!!
Maverick82 from Germany - Jan 23, 2013Report Spam @ Ibrahim kalhasan
Solution: The subnet mask is /20. So you have 4 bits in the 3rd octet for the hosts. This means you have a magic number of 2^4=16.
Your subnet starts at 184.108.40.206/20.
The next subnet with a subnet mask /20 starts at 192.1.144+16.0 = 192.168.160.0/20. So you can address your hosts from 220.127.116.11 to 192.168.159.254. so A & D are the correct answer.
Ibrahim kalhasan from United Arab Emirates - Jan 22, 2013Report Spam Please can someone help me to found solution for this answer
please check this url to see my question http://s7.postimage.org/4qecit0mz/name.jpg
The question regard Route Summirization
kalido from Australia - Jan 22, 2013Report Spam Stil valid although there a few new simple questions. Labs were eigrp processs number and acl. Pretty straight forward. Good luck
Mahmoud Mahfouz from Egypt - Jan 22, 2013Report Spam Thanks Allah :) passed in 21/1 at 6 PM with 9xx/1000 .. about 42 Q of 47 Q from this dump still valid and there is little change in the Labs you could find in 9tut.com " ACL still host C but change in second task" prevent other traffic for host c and other host" it's exist in "Some modifications" 3rd table
2- a little change in Eigrp such as her http://www.9tut.com/64-ccna-eigrp-lab-question#more-29 " little different in IPs
Gee from US from United States - Jan 21, 2013Report Spam What are the current Labs???? I test on 1/26 AM.
Sunny from India - Jan 21, 2013Report Spam Guys i am planning to give the exam on 24th Jan, any special attention i need to take care of.
M referring certkey 680 and EIGRP/VTP/Access list Lab. Anything more.
Daniel from United Kingdom - Jan 20, 2013Report Spam What are the current Labs, test on the 22nd.
Abdurahim from Saudi Arabia - Jan 19, 2013Report Spam Valid 100%
I passed the exam today and this dump still valid
patrick from Panama - Jan 17, 2013Report Spam this dump is valid 933/1000 about 40q from here and all the labs (for the labs go to 9tut)
Adnan from United Kingdom - Jan 17, 2013Report Spam Dumps still valid, passed today with 9xx. Thanks www.networksheaven.com for Labs..
Kilani from United Arab Emirates - Jan 17, 2013Report Spam RIP Flush , Now whats the correct answer ? 240 or 60 ? Iam confused now
Alex from Germany - Jan 17, 2013Report Spam RIP Flush.
It was marked as not valid now 180 seconds ago. and we consider from the point of zero. Flushed time is 240s. 240 - 180 the result is 60
Chronos from United States - Jan 16, 2013Report Spam Concerning the RIP Flush. All the timers in the router protocols are customizable, but each have a default too. The example shown in the question has the default RIP timer configured for it's flushing function.
Refer to: http://www.cisco.com/en/US/docs/ios/12_0/np1/command/reference/1rrip.html
"Flush: Amount of time (in seconds) that must pass before the route is removed from the routing table. The interval is measured from the last update received for the route. The interval should be longer than the larger of the invalid and holddown values. If the interval is less than the sum of the update and holddown values, the proper holddown interval cannot elapse, which results in a new route being accepted before the holddown interval expires. The default is 240 seconds."
The answer given are indeed correct.
Alex from Germany - Jan 16, 2013Report Spam exam F F64
Refer to the exhibit. After a RIP route is marked invalid on Router_1, how much time will elapse before that route is removed from the routing table?
Router_1# show ip protocols
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 8 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Outgoing update filter list foe all interfaces is not set
Incoming update filter list for all interfaces is not set
E. 240 seconds is not correct
most be 60s
mike from United States - Jan 15, 2013Report Spam Anmol did you study just the certkey680Q ???
Shiro from South Africa - Jan 14, 2013Report Spam I'd like to know can you use the ? and abbreviations in the exam? Can some1 also clarify if the sims on 9tut is EXACTLY the same as the exams sims
Naren from United States - Jan 14, 2013Report Spam I passed CCNA exam on 12 Jan 2013..guys 100% from Prepeking 680 questions and sim from 9tut ACL, EIGRP and VTP.
Ajey from India - Jan 13, 2013Report Spam Guys i passed CCNA examination yesterday (12-1-2012) at chennai (India). I scored 961/1000. I used this Acme 676 dump, 9tut sims. My sims are vtp, acl, eigrp. This dump is 200% valid. I had no questions out of this dumps. Thanks everyone.
Smutty123 from Malaysia - Jan 13, 2013Report Spam certkey 680Q is 100% valid. Took the test this past Wednesday and nailed it like a champ. If anybody wants PK 680q dump here you go https://www.yousendit.com/directDownload?phi_action=app/directDownload&fl=SWhZekZsT01CTW15VloxWGhsRU1Eak9yZWt5UmdteDRsUjJuWENHRzVZbz0&experience=bas
Does anyone knows how to open this? tried to download and unzipped but can't open it. it shows "could not find the main class, program will exit."
hari from India - Jan 12, 2013Report Spam dumps are valid ........
irfan ahmad Pakistan from Pakistan - Jan 12, 2013Report Spam i passed the exam 12 jan 12:pm labs EIGRP ACL VTP
Hugo from Spain - Jan 12, 2013Report Spam I have a question:
In multiple choice multiple answer questions, the statement says if you need to choose two or three answers or it says nothing about it.
salas from Egypt - Jan 12, 2013Report Spam valid 100% with the labs all in the exam with some more tricks, i just passed yesterday
anmol from Latvia - Jan 11, 2013Report Spam certkey 680Q is 100% valid. Took the test this past Wednesday and nailed it like a champ. If anybody wants PK 680q dump here you go https://www.yousendit.com/directDownload?phi_action=app/directDownload&fl=SWhZekZsT01CTW15VloxWGhsRU1Eak9yZWt5UmdteDRsUjJuWENHRzVZbz0&experience=bas
sunil from India - Jan 11, 2013Report Spam @Vikram if u have certkey 680q it is enough and for simulation 9tut best.
PO from Thailand - Jan 11, 2013Report Spam Passed the exam on 10 January 2013 with 960/1000...
All 50 questions came from certkey 680Q dumps --- 100% Valid.
Labs --- EIGRP (IP changes)
ACL2 (IP changes)
VTP (no) 5 questions
Drag and Drop 3 questions
Thanks to Examcollection, 9tut and everybody, All the best everyone and Good luck to all who are going for CCNA certification..
sunil from India - Jan 11, 2013Report Spam @shalabh If u have read certkey 680q then u don't need to worry about it all the question in link included in this 680q,some question are tricky they are asked with different word,phrase.Even if u think that these question new to u i think u can read this 4 times today itself as know these are just 70 questions,be confident.Best of luck.
sunil from India - Jan 11, 2013Report Spam @shalabh Don't worry,go with confident.
shalabh from India - Jan 11, 2013Report Spam exam in 24 hours..scared...please ny1 tell if there is any change in course in india...nd how about this link mentioned by other of 70 ques.
Aqel from Jordan - Jan 10, 2013Report Spam Dear Jdiaz71
can you help us and write the change has made for the VTP, EIGRP and ACL 2, change (ip addreess in general) and upload it to any free web site
with me best regard
Jdiaz71 from United States - Jan 10, 2013Report Spam Hello guys,
Yesterday I passed the exam (986/1000)..this dump is valid..I have been studied from septembre ( cisco press two books, 9tut.com and dumps), everything is there. I had VTP, EIGRP and ACL 2, the same as 9tut but just a little change (ip addreess in general)...good luck everybody and 9tut: thanks a lot...
Paul from Finland - Jan 10, 2013Report Spam Still valid passed today :) I had VTP, EIGRP, ACL
Mohammed from Oman - Jan 10, 2013Report Spam @azwy
you should use full version of visual cert exam suite not free trail .
The correct answer is
C: RouterA has a lower OSPF priority value than the router elected as DR.
sangamesh swamy from India - Jan 10, 2013Report Spam Pied_Piper:hi i am not able to download quation from this site http://www.4shared.com/rar/2ODnJEJ4/CCNA_Exam.html can you help me to download..... thanks
JBJ from Malaysia - Jan 09, 2013Report Spam Refer to the exhibit. Why was RouterA not elected as the designated router?
A: The interface address of RouterA is a higher value than the interface address of the DR.
B: The OSPF process ID of RouterA is lower than the process ID of the elected DR.
C: RouterA has a lower OSPF priority value than the router elected as DR.
D: RouterA is not advertising the interface with address 18.104.22.168.
Correct Answers: D
On broadcast and non-broadcast multi-access networks, a designated router and backup designated router are elected. The election is done by first choosing the routers with the highest priority value or, if the priorities are same, choosing the routers with the highest router ID. The router ID is chosen by the highest IP address on any loopback interface or, if no loopback interfaces are configured, the highest IP address on any active physical interface.
Referring to the exhibit of the "show ip protocols" command: Router ID is:
22.214.171.124 but this network is not advertised using network command on OSPF. So interface having 126.96.36.199 IP address is not participating on OSPF routing.
Therefore, RouterA is not elected as the designated router.
******************I think this answer is wrong since ospf doesn't care What is configured/chosen as the RouterID ************* can anyone tell me the TRUE ANSWER and corect me if Im wrong !
Tarek.elgasour from Egypt - Jan 07, 2013Report Spam link exam 680q
Ibrahim from United States - Jan 07, 2013Report Spam @ Noureddine
Can you eloborate on Labs - what changes in ACL lab & how about other labs, were they exactly same
Tshiams from DRC from South Africa - Jan 07, 2013Report Spam this dump is valid, 894/1000.
Prince RDC from South Africa - Jan 07, 2013Report Spam This dump is valid but there have two question of lab ( acl and eigrp) what have changed the IP address.
aqel from Jordan - Jan 06, 2013Report Spam need your help please
i need the new questions, labs are the same ACL, EIGRP and VTP with some changes in ACL.
Noureddine from Morocco from Morocco - Jan 05, 2013Report Spam Hamdolillah, passed with score 960/1000, about 5 to 7 new questions, labs are the same ACL, EIGRP and VTP with some changes in ACL.
Sarah from Egypt - Jan 05, 2013Report Spam It opened finally. When did u take your exam? I will confirm to you after my exam 2om. Hope it works..
Sarah from Egypt - Jan 05, 2013Report Spam @Pied_Piper I can't find the file!
it says the below. My exam is 2om so appreciate your prompt feedback. Thnxs
Sorry, the file link that you requested is not valid.
Reasons for this may include:
Pied_Piper from Pakistan - Jan 05, 2013Report Spam i got all 50 questions from this 71 questions poll including vtp,acl2 & eigrp sims. link is below
all past test takers plz see and reply that did u got same questions in ur exams??
Ron from Netherlands - Jan 05, 2013Report Spam Hi i've passed the CCNA exam with 900 points, i've read the CCNA studyguide.
And studied the below questions. I had the labs ACL2, EIGRP and VTP with some adjustments.
Sekhar: Had around 90% of all the questions.
certkey 680: Had around 95% of all the questions.
I would suggest read through the studyguide, and try to understand why the answers are what they are.
Just studying the questions for me was not enough.
ChemicalBoy from Argentina - Jan 04, 2013Report Spam Hi Hussain, those modifications are in the premiun membership? Or are open to everybody ?
HUSSAIN from India - Jan 04, 2013Report Spam hey guys
you can find many things about the sims on 9tut.com with the modificatin.
aditya from India - Jan 04, 2013Report Spam Aditya from India
did i pass exam sure.by preparing this dumps
Mr. R from Egypt - Jan 03, 2013Report Spam Where is the VLAN SIMET existing ?
ecm from United Kingdom - Jan 03, 2013Report Spam @Taylor. You will find that by also studying books on ccna, you will find it a lot easier. Just studying dumps alone wont help you pass if you don't have any base knowledge.
HUSSAIN from India - Jan 03, 2013Report Spam I had the exam on jan 2ed and have passed with 920
this dump's still valid,but 2 new questions & there is some modification in ACL SIMS u can read it on tut9.com.
all the best
Saher from United Kingdom - Jan 02, 2013Report Spam @Sarah
Taylor from Philippines - Jan 02, 2013Report Spam Wasted my 3 months salary for this stupid invalid dump!!! 50% valid. I will retake exam on the 4th and use Sekhar instead
Karthik K from India - Jan 02, 2013Report Spam I took the exam today and have passed it :-) This dump is valid.
Nyi Nyi Min from Myanmar - Jan 02, 2013Report Spam i did,thank 9tut and examcollection.com.
My exam score is 947/1000.Total exam question is 50 including EIGRP,VTP,ACCESS LIST 2 simulation.
Thanks exam centre MYANMAR KNOWLEDGE.
Sarah from Egypt - Jan 02, 2013Report Spam Hi, in multiple choice if it asks for 2 answers but I only got 1 correct so do I lose the whole Q mark?
Saher from United Kingdom - Jan 01, 2013Report Spam @Sarah
Yes , go to 9tut site and choose Sim Lab , there you will find some Labs , ACL2 , EIGRP and VTP (VALN) , and NAT.
AS was 212
jack from United States - Dec 31, 2012Report Spam what are the answers for the labs,the ACL and the VTP guys what AS numbers did u get and which routers did you have to apply the network to?
Aung Kyaw Oo from Myanmar - Dec 31, 2012Report Spam From Myanmar
Aung Kyaw Oo from Myanmar - Dec 31, 2012Report Spam I have passed the CCNA exam with 947/1000 at 19 December 2012.
sasikumar from India - Dec 31, 2012Report Spam Thanks 9tut.com and sims as usual with some modification..learn the concepts u ll surely pass with high score
Jigar from India - Dec 31, 2012Report Spam Hello Guys.
This dumps are 10000% valid. passed today with score 867. i have learn only this dump. LAB is EIGRP, ACL2(with some modification) and VTP all the three labs are available on 9tut.com.
Thnks 2 all of you guys. for your help because when i read a new comment that this dump is valid nd thr r this kind of changes in the lab. i m fill satisfied.
Thnks 2 examcollection and of course 9tut.com.!!! :)
Z Khan from United Kingdom - Dec 31, 2012Report Spam Hi All
I have booked my exam on 4th of jan I am using these questions only. I will let you know if these questions are valid or not.
Saher from United Kingdom - Dec 30, 2012Report Spam @Muhammad Usman
As I said , you can use this one (Just Download it)
and / or
Saher from United Kingdom - Dec 29, 2012Report Spam This dump is 100% valid. Allhamdullah , I've passed my Exam today. I've got 986/1000. have got VTP (with some modification), ACL 2 (Just Host D should be able to access F.C.), EIGRP (same) sims. I give you a tip , don't be confused regarding which dump is better etc. I did more than 4 dumps , all question seems to be the same just with some changes , therefore learn any of the dumps which has more questions , I prefer this one or SEKHAR , you can use Q680 also but you will find that all questions are similar. SEKAR is better because you gonna find an explanation for each correct answer. All question came from these dumps without any modifications, just Sim as i reported (easy to configure)