Tutorials
Exam Formatter
Forum
Upload
FAQ
Contact
Cisco
CompTIA
Oracle
Sun
RedHat
Citrix
IBM
CheckPoint
CIW
LPI
Novell
VMware
CWNP
EXIN
Other
Home >
Cisco > 350-001
Download Cisco.ActualTest.350-001.v2011-08-01.by.SanjanaChopra.156q.vce
|
How to Open VCE FilesFiles with VCE extension can be opened with Visual CertExam Suite.
DOWNLOAD IT (2.7 MB) Site Search: |
Thanks...
enough to pass ccie written exam , thanks sanjana & all guys supported here
im looking for partner for CCIE lab workbooks (ine,ipexpert,narbik & ...) .
contact by email.
h_411@yahoo.com
this Dump is still valid.
Thanks a lot Spike & Sanjana
and remember i have got trainings for CCNA, CCNP, CCIE Lab, CCIP, CCDP, MCITP, LINUX(RED HAT) ?
please if anyone can tell me ?
just want to share as others did, this is still valid and spike as well. just not sure what i encoutered is that there is 1 question that has 4 sub question that you need to check based on what they provided on shows cmd. but still managed to pass 988/1000.
you can see what test let is.
good luck for your exam. No configurations should be done like ccna , ccnp.
I just passed before 45 minutes. (973/1000.)
As far as passing the exam is concerned, SPIKE or SanjanaChopra VCE is enough.
All are from there except the simlet which has four questions about:
Two Q:Sh ipv6 mroute output asking about Multicast group, Sparse/dense mode, RP,
One about applying as-path filter then it will ask you which of the three routes will pass to R#?
One " Of the routes(30.30.0.0/16, 40.40.0.0./16 and 200.200.0.0/16) from R6 which one will appear at R4.?
But the exam is so simple if you are comfortable with:
Cisco.ActualTest.350-001.v2011-08-01.by.SanjanaChopra.156q
OR
Cisco.ActualTest.350-001.v2011-09-16.by.Spike.162q.
Good Luck
Thanks all of you and rstut.
Do we get simulations or drag & drop in CCIE -Routing & Switching exam?
any link from where I can get it?
Many Thanks,
Just want to know if you can give some link for the updated resources.
pls help
Thanks
Can you share simulation questions in your exam
I will take the exam 26 nov
Congratulations for success. kindly send me all the required material on following email id ccie.preparation1@gmail.com. waiting for your swift response.
965/1000 , thanks to this site and sanjana's upload :)
1] Where can i find the Simulation for ccie written & how many simulation comes.
2] Which dumps are sufficent P4S (205 Qs purchased) or spike & sanjana given in this site.
3] & Does the questions comes exactly as given in these dumps or changed with respect to IP address and list of options given
I have booked my exam on 19-Nov-2011 So kindly revert asap.
Looking hearing to anyone from u.
Regards
Muhammad
Thanks in advance sanjana.
I have completed my CCNA & CCNP(route,switch,tshoot pursuing) and i am planning to start working next year...
Will i get a good job next year? I have also completed my graduation with distinction and i am doing my postgraduation as well...! Kindly reply!
Your valuable suggestions will definately help me..! Thanks alot :)
Is Sanjana's 162Q still Valid? Can you send me the P4S 195Q ASAP. I've my written exam tomorrow. My email address is tinaray4u@yahoo.com
Congratulations for success. can you share the P4S 205Q Dumps.... my email ID is ccie.preparation1@gmail.com waiting for swift response from this forum
I cleared 350-001 today (29 Oct 2011, India) with 991/1K.
1- RSTUT.com proved very useful.
2- Examcollection VCEs/Discussions (Spike's 162 Qs & Sanjana's 156 Qs) are worthy.
3- P4S 195Q is valid (205Q have 5 new Qs with rest Qs as a repeat or just word/sentence changes).
Few Qs with answers like "Attempt Telnet to check connectivity if BGP across a Firewall connects" ->My choice in Exam, are different. So cross check with RSTUT & EXAMCOLLECTION VCES.
4- I had 1 Sim (4 Qs) Q1 on BGP Regexp _100$, Q2 on QoS Precedence vals, Q3 on OSPF with RID 7.7.2.2(1 option), Q4 on OSPF with similar Q but 2 options.
Just relax... After study though :) & rock it.....
Dont worry about sims, they wont affect your passing score on written.
Consider this open door to CCIE R&S LAB as gift from Sanjana to us...
now all get on your switches and routers and STUDY - HARDEN THE FU^K UP AND MOTIVATE YOURSELF EVERY BREATH YOU TAKE ! you were BORN TO BE CCIE - FULFILL YOUR DESTINY !!!
I have completed my CCNA & CCNP(route,switch,tshoot pursuing) and i am planning to start working next year...
Will i get a good job next year? I have also completed my graduation with distinction and i am doing my postgraduation as well...! Kindly reply!
Your valuable suggestions will definately help me..! Thanks alot :)
I Have planned to do CCIE (R&S). any one tell me about simulation tool on which i will practice whole ccie lab practice. i need help........about this...
please join 24/7 to this IRC chat :
irc.nordicirc.com(84.52.248.191) port 6667
channel #cciestudy
if it doesn't exist just create it and stay logged in, hopefully more will join.
Question 3. About IPv6 Multicast
There is an output of show ipv6 mroute.
Explanation :
R2#show ipv6 mroute
Multicast Routing Table
Flags: D – Dense, S – Sparse, B – Bidir Group, s – SSM Group,
C – Connected, L – Local, I – Received Source Specific Host Report,
P – Pruned, R – RP-bit set, F – Register flag, T – SPT-bit set,
J – Join SPT
Timers: Uptime/Expires
Interface state: Interface, State
(*, FF08:AAAA::1), 00:04:05/00:03:25, RP 2002:2222::2, flags: SP
Incoming interface: Tunnel2
RPF nbr: 2002:2222::2
Immediate Outgoing interface list:
FastEthernet0/0, Forward, 00:04:05/00:03:25
There is an multicast groups that has joined the router.
The answers are:
The option with the multicast group with the first octet in every route. This case (FF08) check whatever your output (*,G entry) and flag ,Flag = SP ,The RP use sparse mode.
Exam Questions Look like this
R2#show ipv6 mroute
(*, FF02::2), 00:02:57/never, RP 2002:2222::2, flags: SPC
Incoming interface: FastEthernet0/0
RPF nbr: FE80::266:66FF:FE66:6666
(*, FF04::6), 00:02:57/never, RP 2002:2222::2, flags: SPC
Incoming interface: FastEthernet0/0
RPF nbr: FE80::266:66FF:FE66:6666
(three answers)
1-Some thing about expiry for Multicast group 1 after 60 second
2-the Multicast group address is 2002:2222::2
3-Some thing about expiry for Multicast group 1 after x second
4-the RP address is 2002:2222::2 (Correct Answer)
5-the Multciast Group addrrsses are (FF08:: som strange number i think it was the RPF NBR) (wrong)
6-the Multciast Group addrrsses are FF02::2 and FF04::6 (correct.note the (*,G))
7-the operating Mode is spase mode (correct.note the S flage)
Q2 - Explanation of Simlet Question (OSPF Designated Router Router ID )
Router# show ip ospf database
<Out put - LSA types>
The question is about a show ip ospf database where there is an LSA TYPE 2 in a broadcast network type ospf.
Exam Answer is = 7.7.2.2 is the designated router router ID
The Exam answer is: = 7.7.2.2 is the designated router routerID
Exam Questions Like this
For R4 which is running OSPF they give output similar to the below
LS age: 1367
Options: (No TOS-capability)
LS Type: Network Links
Link State ID: x.x.x.x (address of Designated Router)
Advertising Router: 7.2.2.2
LS Seq Number: 800000E7
1- the designated Router ID is x.x.x.x
2- the designated Router address is 7.7.2.2
3- The ID of the designated Router ID is 7.7.2.2 (Correct Answer)
4- xxxxxxxx
Simulated Question topology Look Like This R6(BGP AS40) ———> R3(BGP AS1000)————> R2(BGP AS10) (AS 40 have 3 Router R3, R5 and R6 connected via FRAME RELAY and Running Also EIGRP) and Router 3 is Connected to AS 1000 and R2 connected to AS 10 contain only one router R4 running OSPF
Based on this Topology you will get 4 Questions
Two type of Questions are coming this single irrelevant configuration
route-map 5 BGP permit
match ip address 1
set community no export
route-map 10 BGP permit
access-list 1 30.0.0.0 0.255.255.255
Q 1- BGP – Look at the configuration in R3. Of the following routes (30.30.0.0/16, 40.40.0.0/16, and 200.200.0.0/16) Which ones will show up in R2?
Answer – 40.40.0.0/16 and 200.200.0.0/16 will show up. 30.30.0.0 will not be sent to R2 because it is now in the community of ‘no export’
Q 2 for R3, R6 and R5 they give you some output containing syslog message that indicate explicit K-Value mismatch and BGP neighbor R5 is down and TCP connection to R5 is expired.
03:55:51: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 172.31.25.2 (Serial0) is down: K-value mismatch (Sample Output)
Jan 12 07:17:42.391: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 172.31.14.1 (Serial0/0.1) is down: holding time expired (Sample Output)
1-EIGRP is failing due to BGP is failing to form)
2-Some Eigrp metric value has been changed (Correct Answer)
3-Some path cost value has been changed
4-BGP connection is failing between R3 and R6 and Between R3 and R5.( Correct Answer)
5-BGP connection is failing between R3 and R5
6- wrong choice.
Hi, Can you explain more on simlets, i understand they require physical configuration ? If so is that information covered in this dumplet ? can you elaborate more plz. thanks
It would be grate job.. ,hope will get replay soon this form
Thanks in Advance
Shefli
Passed CCIE R&S written with 991/1000 Today.
76 Questions + 1Simlet. No drag and drop.
Simlet was 4 questions, 1 BGP&EIGRP, 2 BGP with EIGRP K-Value mismatch, 3, OSPF (sh ip ospf database) and 4, Multicast EIGRPV3 (eigrp process need to be enable on both routers)
156Q is still valid..
Thanks
Q1> Designated Router Router ID >> 7.7.2.2
Q2> Multicast of IPV6 (Show IPv6 Mroute )
Q3> EIGRP
TTK@Thailand
hi Ali i need help about written exam can u tell me plz rizwan.ahmed.sajid@gmail.com
Do contact me regarding lab preperation. usama.ishtiaq@hotmail.com
will you pls. give me your mobile or email id so that I may contact you for lab preparation
thanks
Jamal
From Islamabad.
Regards
guys i will buy a lab dump, and i need partners: netspyder_13(at)yahoo
congrats!
And can you explain me, what do you say with: "The sim already discussed came out."
The sim already discussed came out.
Thanks all.
I got 77 question, only one sim. All questions were from SanjanaChopra.156q.vce dumps.
Thanks all once again :)
I would like to Know as to which book i should refer to ,
and please share CBT Nugget for the CCIE Written Exam.
Thank U
Joe Desouza
can someone direct me to a study guide i could read for the exam.
Thanks in advance.
The Sim Let has 4 questions namely 1. QoS amrking
2. if you configure a policy-map you need to quee on the output so you match dscp values so you need just know that.
3.EIGRP>sends notifications saying exatcly what the problem is k-values
4.BGP neighbor relationship goes down due to the underlying IGP which is eigrp
Do not stress thats all it is, unless there is someone that can help here.
<b> 991/1000 </b>
<b>Valid Dumps </b>
<b> Thanks Sanjana Chopra </b>
<b>Thank you!
this does not help us
@Maze
Sim Let: configuring ipv6 eigrp, qos marking, matching. The rest is the same.
Eigrp with BGP> IGP going down dues metric change then affects BGP in a farme-relay network its easy.