Download Cisco.ActualTests.640-802.v2012-06-27.by.Napoleon.643q.vce

Comments

* The most recent comments are at the top.

• Chingari from Pakistan - Nov 07 2012, 6:55 AM Report Spam

  Dumps Still Valid. Passed exam yesterday got 920/1000, SIM EIGRP, VTP & ACL2
• ASTRIX from Unknown - Sep 16 2012, 5:29 PM Report Spam

  Hi.. Passed with 973 on 15-9-2012.... Thanks to almighty God..
  Also 9tut Sims.. same as there VTP,ACL2 and EIGRP..
  
  One tip for ACL .. Just clear concepts of Which Direction and Which Interface we should put ACL.. I got stuck for few minutes..!!
  
  Dumps were Sekhar,Napolean and Brar..
  Cisco Press books..
  and from Pass4Sure 662 Dumps from here:
  http://www.mediafire.com/?5r42yz28spv5s6z
  it includes all questions.. Although some answers were wrong..Just check it ..
  
  Exam was so easy.. completed in 32 minutes..
  Somebody said right.. For CCNA-Just Preparation is Tough/Hard.. Exam will be automatically Easy..!!
  
  Go with confidence.. Best of Luck...!!
• Ghufran from Pakistan - Aug 06 2012, 12:09 PM Report Spam

  I passed the exam.
  
  Labs are ACL, EIGRP and VTP
  
  Almost all questions are here.Good luck to the test takers.
• teju from United States - Jul 30 2012, 7:34 AM Report Spam

  Hi Mani,
  
  Have u refered only to Napoleon.643q.vce or anything else.
• Manikandan from India - Jul 27 2012, 4:48 PM Report Spam

  Passed the exam today with 841 marks (EIGRP, ACL and VTP)
• tamer from Kuwait - Jul 12 2012, 12:46 PM Report Spam

  this exam is valid
• Spyroute from Unknown - Jul 08 2012, 3:12 PM Report Spam

  Prepared for CCNA with ONLY Collisio 487q.vce and 9tut labs, scored 986 in 50mins, Dated 08/07/2012... Dont waste time on any thing else. Good Luck.
• GA from United Arab Emirates - Jul 04 2012, 7:25 AM Report Spam

  No , study 9tut.com +Cisco Acme 640-802 v2012-04-18 by Collisio 487q.vce
• ssminl from Singapore - Jul 04 2012, 3:40 AM Report Spam

  If I just study the text book questions, can i pass the exam? Thank you for the help.
• awesomeguy from Macedonia - Jun 30 2012, 9:32 AM Report Spam

  @Yosuf
  
  Thanks for the info! That really helped! :P
• Yosuf from Saudi Arabia - Jun 29 2012, 7:00 PM Report Spam

  sorry it is 192.168.164.189/30 instead of 192.168.164.189/28
  
  last one is the serial interface of the router on the left, we will use /30 for this subnet, this is a WAN link and a recommended subnet mask for this type of link is 255.255.255.252 or /30. our network address is 192.168.164.188, valid ip addresses that can be assigned to the serial interface are 192.168.164.189 and 192.168.164.190 only for both ends, respectively, broadcast address is 192.168.164.191, so 192.168.164.189/30 the correct selection that can be assigned to the inteface.
• Yosuf from Saudi Arabia - Jun 29 2012, 6:56 PM Report Spam

  @awesomeguy
  
  I found that question in this dump.
  
  If you can recall the topic about VLSM..
  
  The drag & drop question has asked to assign the correct ip address for the specific interface of the routers that met the correct number of host on the network connected to it.
  
  Let's start from the highest number of host.
  
  Inteface F0/0 of the router in the middle has a 16 hosts connected to it, so we will use /27 for that interface, the network address for that subnet is 192.168.164.128, valid ip address that can be assigned to the hosts is 192.168.164.129 up to 192.168.164.158, broadcast address is 192.168.164.59, so 192.168.164.149/27 is the correct selection that can be assigned to that interface.
  
  second is the interface of the router on the left with 11 hosts, we will use /28 for this subnet, our network address is 192.168.164.160 valid ip address that can be assigned to the hosts is 192.168.164.161 up to 192.168.164.174, broadcast address is 192.168.164.175, so 192.168.164.166/28 the correct selection that can be assigned to the inteface.
  
  third is the interface of the router on the right with 6 hosts, we will use /29 for this subnet, our network address is 192.168.164.176 valid ip address that can be assigned to the hosts is 192.168.164.177 up to 192.168.164.182, broadcast address is 192.168.164.183, so 192.168.164.178/29 the correct selection that can be assigned to the inteface.
  
  last one is the serial interface of the router on the left, we will use /30 for this subnet, this is a WAN link and a recommended subnet mask for this type of link is 255.255.255.252 or /30. our network address is 192.168.164.188, valid ip addresses that can be assigned to the serial interface are 192.168.164.189 and 192.168.164.190 only for both ends, respectively, broadcast address is 192.168.164.191, so 192.168.164.189/28 the correct selection that can be assigned to the inteface.
• awesomeguy from Macedonia - Jun 29 2012, 2:48 PM Report Spam

  On one question in this dump there were 3 floss routers and I had to pick the correct IP and prefix for their network (they were interconnected). The answer was 192.168.164.189/30 but how can it be /30 when there are 3 routers and 2 host bits and 2 on the power of 2 is 4 and 4-2 is 2.
• scarecrow from India - Jun 29 2012, 4:52 AM Report Spam

  Have my CCNA exam tomorrow, thanks for the dump! Will browsing through it! Any advice, please let me know! I'll be here online all day! :)
• Mustafa from Egypt - Jun 28 2012, 11:05 AM Report Spam

  Hi all,
  I am planning to do ccna exam in coming week , any tips or advices which exams should i focus to get pass
• mazhar from India - Jun 27 2012, 3:36 PM Report Spam

  Hi,all
  
  Good questions ,but i want to nw tht this is latest one .becz in ccna exam only upto 55qn will be thr .so in this 600+ qns r available .how ????...
  
  And this all wil help to get pass in exam.....
  
  
  
  
  Thanks,

Vote For This File

Verification:* Type the characters from the picture.

Add Comment

Name:*
E-mail:* This e-mail will not be published.
Comment:*
Verification:* Type the characters from the picture.

Stay Up With The Latest VCE Uploads

Subscribe to the latest VCE uploads RSS feed.

Site Search: