Microsoft.test-inside.70-410.v2013-10-12.by.Azeem.50q.vce

soma

Wednesday, November 19, 2014 1:02 PM UT

Q 19:

You have a server named Server1 that runs Windows Server 2012.

You plan to create a storage pool that will contain a new volume.

You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.

What is the minimum number of 256-GB disks required for the storage pool?

As per dump correct answer is A

A = 2
B = 3
C = 4
D = 5

The right answer will be B

• The keywords here are provisioning and parity
• Parity requires at least three disks
• Using provisioning, you can make the vdisk larger than what you actually have, so you can use only two 256-GB disks to create a 600-GB volume
• The right answer will be B (three disks) because you will need at least three disks to use parity

David

Saturday, December 28, 2013 6:02 PM UT

Lukaszku

Monday, October 21, 2013 7:44 AM UT

Why there are only 50 questions when in previous dump were more than 150?
And why my last comment was deleted??

Ghiz

Monday, October 21, 2013 6:33 AM UT

do you guys have randomness turned OFF or ON when telling us which Q may be wrong? I think you guys have it turned on, cause none of the below Q-numbers relate to my dump with the randomness turned off.

Драган

Thursday, October 17, 2013 9:21 PM UT

Exam A Q35
Corresct is A
http://www.petenetlive.com/KB/Article/0000714.htm

====================================================
Exam A Q15
Correct is А
====================================================
Exam А Q24
Correct is је А and D
http://technet.microsoft.com/en-us/library/cc772180.aspx

===================================================
Ivan, that question is number 48 in my dump. I think that you are not right. It is possible to install desktop experience at core.

Svetlanka

Thursday, October 17, 2013 12:08 PM UT

@Hela, when you open Visual CertExam Manager you see a window where you have to choose which exam you want to start. In the same window in the upper left corner there are 3 tabs. ->Exam->Options->in General tab you will see "Randomize questions" option.

Eric

Wednesday, October 16, 2013 6:22 AM UT

You have a Hyper-V host named Server1 that runs Windows Server 2008 R2. All of the virtual machines on Server1 use VHDs.

You install the Hyper-V server role on a server named Server2 that runs Windows Server 2012. Server2 has the same hardware configurations as Server1.

You plan to migrate the Hyper-V host from Server1 to Server2 by using the Windows Server Migration Tools.

In the table below, identify what can be migrated by using the Windows Server Migration Tools. Make only one selection in each row. Each correct selection is worth one point.

virtual machine configuration yes/now
hyper-v settings yes/no
the vhd files that are attached to a virtual machine yes/no
the virtual floppy disk yes/no

I know for sure the first 2 can be migrated. What about the last 2. I would think the VHD as well?

vignesh

Wednesday, October 16, 2013 4:31 AM UT

use arimo it convert vce to pdf

Hela

Tuesday, October 15, 2013 7:41 AM UT

@CopperHead I do not see the remove randomize question option Is it on the designer or on the manager, I checked both on the visual cert manager and designer and there is nothing like that.

@ Azeem thanx il try to download the pdf version, because i cant seem to remove the randomness in the manger and the designer

failin'

Tuesday, October 15, 2013 4:54 AM UT

@Raj and @Ivan you are both correct. There are answers in these that are wrong. Would be great to keep conversation going on these. I've posted a few I have found on previous tests, as they are all pretty much the same.

thanks

Raj

Tuesday, October 15, 2013 1:06 AM UT

I think correct answer should be B = 3 Disks only then we can create volume of 600 GB

Q 19:

You have a server named Server1 that runs Windows Server 2012.

You plan to create a storage pool that will contain a new volume.

You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.

What is the minimum number of 256-GB disks required for the storage pool?

As per dump correct answer is A

A = 2
B = 3
C = 4
D = 5

Explanation/Reference
Parity The data on volumes created on this type of virtual disk, together with parity information that can be used to facilitate automatic reconstruction of data in the event of a physical disk failure, is striped across all physical disks in the pool. Parity virtual disks also provide resiliency to help protect you from data loss arising from the failure of a physical disk in the pool, but they perform better with large sequential disk writes than with random I/O.
NOTE REQUIREMENT FOR PROVISIONING RESILIENT VIRTUAL DISKS
If your storage pool has only one physical disk in it, you will only be able to provision simple virtual disks from it. To provision mirror or parity virtual disks from a storage pool, the pool must have at least two physical disks in it.

Ivan

Monday, October 14, 2013 10:33 PM UT

Sorry ignore my last comment below on Q.46- copy and paste error. Correct comment is:

Also question 46 is incorrect. It states "Which of the following is true with regards to server core installations", and says the following answer is NOT true:
e. The desktop experience is not available.

Point E is true. In a server core installation the desktop experience is NOT available. Source: http://technet.microsoft.com/en-us/library/hh831786.aspx

Ivan

Monday, October 14, 2013 10:31 PM UT

Also question 46 is incorrect. It states "Which of the following is true with regards to server core installations", and says the following answer is NOT true:
e. The desktop experience is not available.

Point E is true. In a server core installation the desktop experience is NOT available. Source: Question 45 the answer seems incorrect. The questions states "Which of the following is true with regards to spanned volumes":
a. Spanned Volumes do not provide Fault Tolerance
b. Spanned Volumes are a fault tolerant Solution
c. You can extend a spanned volume onto a maximum of 16 dynamic disks
d. You cannot create a spanned volume using a system volume or boot volume.

The test is showing the correct answers are B and D. I believe it should be A and D since spanned volumes are not fault tolerant. Source: http://technet.microsoft.com/en-us/library/hh831786.aspx

Ivan

Monday, October 14, 2013 10:26 PM UT

Question 45 the answer seems incorrect. The questions states "Which of the following is true with regards to spanned volumes":
a. Spanned Volumes do not provide Fault Tolerance
b. Spanned Volumes are a fault tolerant Solution
c. You can extend a spanned volume onto a maximum of 16 dynamic disks
d. You cannot create a spanned volume using a system volume or boot volume.

The test is showing the correct answers are B and D. I believe it should be A and D since spanned volumes are not fault tolerant. Source: http://technet.microsoft.com/en-us/library/cc772180.aspx

CopperHead

Monday, October 14, 2013 3:45 PM UT

@Hela, remove 'randomize questions' option. Then it will go from 1 - end.

Hela

Monday, October 14, 2013 2:41 PM UT

Hi guys this certexam is so annoying it changes the order of the questions when you reopen it at a different pc, e.g you go through an exam at your pc at work and maybe you end at question 30 and when you get home you open the same question to continue on question 30, you find the order has changed. How do i over come this because i have to use 2 pcs one at work and one at home.

Azeem

Sunday, October 13, 2013 10:31 AM UT

You can download the PDF from this link.

http://www.4shared.com/office/D7pcw-nQ/70-410.html