Microsoft.Certexpert.70-410.v2013-09-23.by.nofenofe.336q.vce

TryingToPass

Saturday, March 15, 2014 4:05 PM UT

Your network contains an Active Directory domain named contoso.com. The domain contains a single locationnamed Site1. The domain contains a server named Server1 that has the DHCP Server server role installed. Allclient computers receive their IPv4 configurations dynamically. The domain will expand to include a secondlocation named Site2. A server named Server2 will be deployed to Site2. Site1 and Site2 will connect to eachother by using a WAN link. You need to ensure that the clients in both sites receive their IPv4 configurationsfrom Server1.

Is the answer not?
Server1: Create a New Scope
Server2: Install the Remote Access server rols, Add a routing protocol

http://support.microsoft.com/kb/232703
http://technet.microsoft.com/en-us/library/cc782859%28v=ws.10%29.aspx

David

Friday, February 07, 2014 11:30 PM UT

Just cleared with 850.
One question was
Your network contains 2 AD forests named contoso.com and adatum.com. both forests contain mutiple domains. A tw0-way trust exists between forests. The adatum.com domain contains a domain local security group named group1. Group1 contains adatumuser1 and contosouser1. You need to ensure that group1 can only contain users from adatum.com domain. Which three actions should you perform?

In most of the exams dumps
It is remove adatum/user1

If u see it closely it says group1 only contains users from adatum.com so the first step is to remove contoso/user1

Thought it might be helpful

Amany Arafat

Saturday, December 21, 2013 2:05 PM UT

VALID in Egypt , Passed with " 865 " today ! thanks for nofenofe , ROD and Snowden

Egyptiany 2

Friday, November 01, 2013 4:35 PM UT

Congrats Egyptiany :)
3o'bal ya rab 411-412
and keeep going :D

Are you sure about this dump because it is differ in Size from the orginal one uploaded in this site .

waiting for your repaly bro :)

john01

Thursday, October 31, 2013 5:05 PM UT

Considering I have the exam tomorrow, I have only managed to study half of the snowden dump and all of Rods latest dump (I should of just studied the snowden one from the outset I think) is it worth still going for it or should I reschedule?

Egyptiany

Wednesday, October 30, 2013 10:17 PM UT

pass today 8xx :)

all Q from
https://www.dropbox.com/s/i5pj360n8199onp/70-410-ScottCha-All-Questions-Working-338q.vce

this dump valid 100%.just need to compare some Q in this dump with Snowden dump and then i promise you will pass.

Paul

Tuesday, October 29, 2013 5:16 PM UT

This dump is not valid anymore, failed today.

Mage

Saturday, October 26, 2013 11:33 AM UT

Exam Q229.
I think the answer should be:
B. Server Manager
H. New-StoragePool

http://www.petri.co.il/create-storage-pool-on-windows-server-2012.htm#

Dylan

Friday, October 25, 2013 12:50 AM UT

Are these questions actually on the exam or just practice? As i have the William Panek mcsa 2012 complete study guide i have read and these questions seem much harder

ROD

Thursday, October 24, 2013 5:47 PM UT

@josh, unfortunately I dont have any "sure" answers, what I am doing is just extracting the questions from snowden (which you can study and are completely safe to be accurate) and creating a new dump with only the new questions (which should be around 180). that so you know which ones you need to be careful with, I haven started studying the dumps, I am hitting the book, trainsignal and cbt nuggets real hard at the moment, will start with the dumps by next week.

josh

Thursday, October 24, 2013 5:36 PM UT

@ROD I am taking the exam tomorrow morning can you please send me the ones which you are sure that are true. I will appreciate that. kaldataforum@abv.bg

ROD

Thursday, October 24, 2013 5:25 PM UT

Ok, until we find a dump that has all good answers, I will do what needs to be done, I am in the process of removing all questions that are in both snowden and scottcha, and will create a dump with only the new questions after the update, so we can start working on correcting those ones only, and studying the rest from snowden. I hope to finish it by tomorrow.

arif

Thursday, October 24, 2013 9:42 AM UT

Your network contains an active directory domain named Contoso.com.
The domain contains 100 user accounts that reside in an organizational unit (OU) named OU1.
You need to ensure that user named user1 can link and unlink Group Policy Objects(GPOs) to OU1.
The solution must minimize the number of permissions assigned to user1.
What should you do?

Run the Delegation of Control Wizard on the Policies containers
Run the Set-GPPermission cmdlet
Run the Delegation of Control Wizard on OU1 (Correct Ans)
Modify the permission on the user1 account

Modify the permissions on OU1. (Correct Ans)
Run the Set-GPPermission cmdlet.
Add User1 to the Group Policy Creator Owners group.
Modify the permissions on the User1 account.

Run the Set-GPPermission cmdlet. (Correct Ans)
Run the Delegation of Control Wizard on OU1
Modify the permissions on the Contoso.comSYSVOLContoso.comPolicies folder
Add User1 to the Group Policy Creator Owners group.

Nisse

Wednesday, October 23, 2013 3:59 PM UT

@ ScottCha ,

Jackc from France under the topic Microsoft.Exactquestions.70 - 410.v2013 - 10 - 01.by.Anna.336q the correct answers of the Snowden noted. Might be useful to also process if it is not already done it.

He writes the following:

This is my checks (with Snowden Dump) :

Q45 good answer : Clean install on new h / clean install on Replace existing h / upgrade
Q60 good answer : remove Adatum / convert universal group / convert global group (ref Snowden Q237 )
Q61 good answer C
Q63 good answer D (ref Snowden Q70 )
Q82 good answer : IPV4 General (ref Snowden Q92 )
Q90 good answer D
Q95 good answer B (ref Snowden Q115 )
Q99 good answer B E
Q111 A good answer (ref Snowden Q231 )
Q116 good answer D (ref Snowden Q36 )
Q136 good answer D (ref Snowden Q77 )
Q137 good answer D (ref Snowden Q75 )
Q150 good answer D (ref Snowden Q64 )
Q155 A good answer (ref Snowden Q55 )
Q167 good answer C (ref Snowden Q42 )
Q171 good answer : Enable Option 60 PXEClient / Enable the Do not listen on ports DHCP . (ref Snowden Q33 )
Q173 good answer B (ref Snowden Q31 )
Q174 A good answer (ref Snowden Q228 )
Q193 good answer C (ref Snowden Q234 )
Q206 good answer B (ref Snowden Q231 )
Q208 good answer C (ref Snowden Q30 )
Q217 good answer D
Q224 good answer D (ref Snowden Q25 )
Q246 A good answer (ref Snowden Q236 )
Q334 A good answer

Peter

Tuesday, October 22, 2013 11:50 PM UT

Hello Suko can you point out the questions it would be nice :D and congrats ;)

juna

Tuesday, October 22, 2013 9:47 PM UT

@
maybe during converting the .pdf to .vce , these wrong answers happened ?
did you check all the answers with pdf ?

ScottCha

Tuesday, October 22, 2013 6:35 PM UT

Hi Suko. Glad you passed. I'd be happy to correct any questions that you can point out are answered incorrectly.

Suko

Tuesday, October 22, 2013 3:16 PM UT

Hi ScottCha. I passed the exam this morning with only 715. 48 questions from your last dump passguide 338q, and 2 new questions. The problem are the answers, be carefull with that and check your doubts with technet, mainly in Hot Area, Drag and Drop and Point and Shot, there are many questions in the exam of that areas, and a lot of wrong answers in your dump.
thanks you very much for everything.

jun-mcsa

Sunday, October 20, 2013 11:35 PM UT

@ Mohamed
toy mean if i just memorize the answers, i will fail ? could you tell us how amny questions with wrong answers scotcha's dump has ?

Sventek

Sunday, October 20, 2013 6:53 PM UT

You deploy a Server with a GUI installation of Windows Server 2012 Datacenter. From Windows PowerShell, you run the following command: Remove-WindowsFeature ServerGui-Shell. In the table below, identify which tools are available on Server1 and which tools are unavailable on Server1.

Make only one selection in each row. Each correct selection is worth one point.

File Explorer
Internet Explorer 10
Microsoft management console MMC
Server manager

What is available and what is not ?

Sventek

Sunday, October 20, 2013 6:52 PM UT

You have two servers that run Windows Server 2012. The servers are configured as shown in the following table.

Server1
Domain or workgroup: consotos.com
Network profile : Domain

Server2
Domain or workgroup: Workgroup
Network profile : Public

You need to ensure that Server2 can be managed by using Server Manager from Server1. In the table below, identify which actions must be performed on Server1 and Server2. Make only one selection in each row. Each correct selection is worth one point.

Server1:
1. Modify the trustedhosts list
2. Set the network profile to private
3. Override the user account UAC restrictions by using the Localaccounttoketfilterpolicy registry entry

Server2:
1. Modify the trustedhosts list
2. Set the network profile to private
3. Override the user account UAC restrictions by using the Localaccounttoketfilterpolicy registry entry

What is the right answer

Sventek

Sunday, October 20, 2013 6:48 PM UT

You have a Hyper-V host named Server1 that runs Windows Server 2008 R2. All of the virtual machines on Server1 use VHDs. You install the Hyper-V server role on a server named Server2 that runs Windows Server 2012. Server2 has the same hardware configurations as Server1. You plan to migrate the Hyper-V host from Server1 to Server2 by using the Windows Server Migration Tools. In the table below, identify what can be migrated by using the Windows Server Migration Tools.

Make only one selection in each row. Each correct selection is worth one point.

What can be managed :
1. Virtual machine configurations
2. Hyper-v setting
3. VHD files that attached to a virtual machine
4. Floppy disk

Sventek

Sunday, October 20, 2013 6:47 PM UT

Your network contains an Active Directory domain named contoso.com. The domain contains a single location named Site1. The domain contains a server named Server1 that has the DHCP Server server role installed. All client computers receive their IPv4 configurations dynamically. The domain will expand to include a second location named Site2. A server named Server2 will be deployed to Site2. Site1 and Site2 will connect to each other by using a WAN link. You need to ensure that the clients in both sites receive their IPv4 configurations from Server1.

In the table below, identify which actions must be performed on each server.

Make only one selection in each row. Each correct selection is worth one point.

Server1 ; Create a new scope - Add a routing protocol - Install the remote access server role
Server2 ; Create a new scope - Add a routing protocol - Install the remote access server role

Any idea about the answer is ?

Sventek

Sunday, October 20, 2013 6:46 PM UT

Your network contains two Active Directory forests named contoso.com and adatum.com.
A two-way forest trust exists between the forests.

You have custom starter Group Policy objects (GPOs) defined in contoso.com. You need to ensure that the same set of custom starter GPOs are available in adatum.com.

In the table below, identify which action must be performed for the starter GPOs container in each forest.

Make only one selection in each of the rows. Each correct selection is worth one point.

contoso.com copy - back up - paste - restore from backup - import setting
adatum.com copy - back up - paste - restore from backup - import setting

Any idea what the answer is ?

Mohamed

Sunday, October 20, 2013 6:32 PM UT

@Scotcha
100 % valid pass today >>>>>>>>>>> but there is many false answe take car
all question from Scotcha passguide
thanks alot Scotcha

Ho

Saturday, October 19, 2013 4:57 AM UT

@Scotcha failed your dump is 50% and new questions are 3-50%

ROD

Saturday, October 19, 2013 12:32 AM UT

@juna if you have the visual cert exam designer you can simply open it with it, and print it to a pdf printer and make your own pdf of any exam.

aaaa

Friday, October 18, 2013 2:11 PM UT

thanks, that worked

ScottCha

Friday, October 18, 2013 1:49 PM UT

Try it again. You might have caught it in the middle of the upload.

I just tested it and it worked for me.

https://www.dropbox.com/s/i5pj360n8199onp/70-410-ScottCha-All-Questions-Working-338q.vce

aaaa

Friday, October 18, 2013 12:41 PM UT

the dropbox link isn't working :(

ScottCha

Friday, October 18, 2013 12:28 PM UT

I also did upload my exam. Let's see if any get published. I uploaded it before the corrections below were made. Please be aware of this.

ScottCha

Friday, October 18, 2013 12:26 PM UT

@Pablo.thanks. Correction made. Also on the Hot Spot areas 3 of the questions did not have answers. (4, 9, 15). I fixed those as well and have put them on the DropBox link.

4. No, No, Yes
9. All are Server 2
15. NIC2, NIC3

Pablo

Friday, October 18, 2013 7:15 AM UT

@scottcha Thanks for your great work!!!!
In the question Exam C Q23 the right answer should be D ( RID Master). Your explain is good but not the letter choice.

ROD

Friday, October 18, 2013 3:22 AM UT

I just uploaded @scottcha´s dump here, lets see if it gets published. All credits to @scottcha, all I did was uploading it. (not sure if he did)

ROD

Friday, October 18, 2013 2:58 AM UT

@scottcha thanks so much. quick question, did you notice any different answers oppossed to the old 336q vces? I havent had a chance to check old vces since I am studying the book and the cbt nuggets. can someone compare to earlier dumps?

Ho

Friday, October 18, 2013 1:07 AM UT

@scottCha Thank you for quick support! Yes I will do that

ScottCha

Friday, October 18, 2013 12:41 AM UT

Here is the link to the latest from passguide.

https://www.dropbox.com/s/i5pj360n8199onp/70-410-ScottCha-All-Questions-Working-338q.vce

Again, I have not personally verified the answers, however, this is what I will be studying from.

If you see any corrections please let me know and I'll update as long as I can verify them.

Hopefully they'll post this test when I upload it.

Ho

Friday, October 18, 2013 12:39 AM UT

@scottcha Thank you very much. could you please upload new dump asap?
I am goint to test tomorrow morning. Let you know about result!

ROD

Thursday, October 17, 2013 6:07 PM UT

@scottcha, thanks so much for all your efforts. we appreciate it a lot.

mojo

Thursday, October 17, 2013 4:03 PM UT

@Scottcha THANKS im taking the exam next week this will be crucial because i have done your previous dumps just going through the important sections in the book but the new questions will.be very helpful

ScottCha

Thursday, October 17, 2013 3:46 PM UT

Ok. Pulling down the latest passguide file and will get it converted and uploaded ASAP. I'll upload it here and also create a DropBox link.

Sventek

Thursday, October 17, 2013 2:42 PM UT

New-StorageSubsytemVirtuakDisk

Anybody know what is that ?

mojo

Thursday, October 17, 2013 2:21 PM UT

If everyones complaining then read the bloody book hes doing us a great favour which you muppets arent appreciating!!!

Sventek

Thursday, October 17, 2013 2:11 PM UT

Event passguide PDF are full of wrong answers.

mojo

Thursday, October 17, 2013 1:54 PM UT

@scottcha they have updated the current questions from 231 to 338 i believe these questions are going to be similar to your previous upload (roberts pdf)
I would be very gratefull to you if you could upload it so i can doublecheck it
you have contributed a great deal and i respect it a lot!!!

sara

Thursday, October 17, 2013 1:30 PM UT

@scottcha , try to get the update from passguide i see that they update them

ROD

Thursday, October 17, 2013 1:24 PM UT

@scottcha, looks like they have updated their exam in passguide. since you just bought it, they should let you get the updated one. can you check that?

Eric

Thursday, October 17, 2013 12:45 PM UT

Passed the exam today. Just use scotcha's dump and snowden's. Keep in mind te verify the answers to questions. Not all of them are correct

Mohamed

Thursday, October 17, 2013 12:14 PM UT

@ ScottCha
thanks , are you know that passguide is upload 338 Q in 15/10/2013 are any one get them ?

ScottCha

Thursday, October 17, 2013 11:48 AM UT

@Mohamed .as I stated earlier.I did not verify the answers. I worked all day putting this .VCE together and don't feel it's my responsibility to research each and every question.

How about you take on that task and report back your findings? I'll then make corrections if I feel they are accurate.

Mage

Wednesday, October 16, 2013 8:16 PM UT

Exam Q334.
I think the answer should be:
A. ReFS

cyber

Wednesday, October 16, 2013 6:37 PM UT

Thank you ScottCha for sharing your dump, you're a good man.! hope this dump was our key to pass the exam.any one can try it?? becoz im still on my ccna and this is my next step.

wigee

Wednesday, October 16, 2013 12:55 PM UT

@ ScottCha

Exam c Q35.
I think the answer should be:
C. The WMI filter for GP1.

Mohamed

Wednesday, October 16, 2013 12:47 PM UT

@ ScottCha
are you sure from the answe in this dump (231 q )
thanks man

SOTA

Wednesday, October 16, 2013 12:42 PM UT

@ ScottCha Thanks i donwload the VCE file from dropbox and it works fine.

ScottCha

Wednesday, October 16, 2013 12:32 PM UT

Ok. Good copy uploaded and tested.

Eric

Wednesday, October 16, 2013 10:31 AM UT

@RandySavage, this is the security configuration and analysis tool. you import the inf file and compare it to the local database. If you want this template applied you just select configure the computer and the policy is set.

RandySavage

Wednesday, October 16, 2013 8:43 AM UT

Can anyone confirm the following:

Your network contains an Active Directory domain named contoso.com. The domain contains two servers
named Server1 and Server2 that run Windows Server 2012.
You create a security template named Template1 by using the Security Templates snap-in.
You need to App1y Template1 to Server2.
Which tool should you use?

A. System Configuration
B. Local Security Policy
C. Certificate Templates
D. Computer Management

I'm reading people saying the answer is A but I fail to see how.

RandySavage

Wednesday, October 16, 2013 8:06 AM UT

I sat the exam today after studying this and snowden dump. There were about 5 new questions. I had more questions from this dump than the snowden. The last 100 questions of this dump came up more than any others, unfortunately the last 100 or so questions answers are questionable. Recommend studying those two and use technet to try and verify answers.

Don

Wednesday, October 16, 2013 5:34 AM UT

Hi ScottCha, bad news, I've written today, and only about 20 questions came out of the passguide dump, most of the others came out of nofenofe and Aamed's dump. There were two also brand new questions which I've haven't came acros, also the wording has changed a lot, making it even more confusing.

ScottCha

Wednesday, October 16, 2013 2:17 AM UT

I just realized it is corrupted. I'll upload a new one in the morning. Sorry about that.

No, I don't know how accurate the questions are. I downloaded the latest dump from Learn2Pass. If you see corrections please note them with documentation and I'll make adjustments.

david

Wednesday, October 16, 2013 12:32 AM UT

@ ScottCha
could you tell us how accurate are the answers of your dump ?
in addition your new uploaded dump is not waorking.

SOTA

Tuesday, October 15, 2013 6:50 PM UT

@ ScottCha I donwload the file from dropbox File is Invalid file format or corrupted file

Please can you upload a new one @ dropbox I really need it
thanks in advance

Mohamed

Tuesday, October 15, 2013 6:47 PM UT

@ScottCha the file uploaded on dropbox is not able to open. re-upload?

aahmed

Tuesday, October 15, 2013 6:31 PM UT

Hi guys, hope everything going well.
try the bellow dump its with some updated questions and correct answers.
Microsoft.Actualcerts.70-410.v2013-10-11.by.aahmedki.299q.vce

ScottCha

Tuesday, October 15, 2013 6:21 PM UT

Sorry about that. Didn't know you had to re-share after putting a new file up there.

https://www.dropbox.com/s/zuaxqqkfiepuvsy/70-410-ScottCha-All-Questions-Working-231q.vce

bob

Tuesday, October 15, 2013 2:26 PM UT

@ScottCha the file uploaded on dropbox is not able to open. re-upload?

MrBrownstone

Tuesday, October 15, 2013 12:55 PM UT

Passed this morning 730/1000, this is valid dump in Italy. Total 50 questions and ALL from this dump as well as Swoden Dump. The problem is . questions are valid . answer not! So verify every single question in a Lab environment if you can.

ScottCha

Tuesday, October 15, 2013 11:50 AM UT

I have corrected Q14 in Point and Shoot. I will be uploading the file to DropBox after I make a few more cosmetic corrections. Keep the correct answers coming.

Thanks guys!!!

ScottCha

Tuesday, October 15, 2013 11:43 AM UT

I don't know about the IPv6 questions. This is the latest dump from passguide. I haven't verified answers, I spent the time getting all of the questions formatted and working properly.

I've seen a few comments where people have said they didn't have any IPv6 questions on the exam.

eric

Tuesday, October 15, 2013 7:09 AM UT

@MHX, General is indeed the correct answer. Keep in mind that not all answers in the dump are correct. You can use snowden's dump and technet to correct them

Bob

Tuesday, October 15, 2013 5:44 AM UT

Thanks ScottCha you the man.

Seems a bit odd though that there a lot of questions that are in the newer dumps that are not in here and no IPV6 questions which people say they have been getting.

Ho

Tuesday, October 15, 2013 2:43 AM UT

Thank you ScottCha! How is ScottCha`dump. Valid? I am going to test this Sat.
Please let me know T.T

MHx

Monday, October 14, 2013 8:58 PM UT

@ ScottCha's dump, Q14 of the point and shoot question.

You have a server named Server1. Server1 runs Windows Server 2012.

Server1 has two network adapters and is located in a perimeter network. You need to install a DHCP Relay Agent on Server1.

Which node should you use to add the DHCP Relay Agent? To answer, select the appropriate node in the answer area.

Snowden's answer was General, and this dumps is Static Routes. Was that a mistake ScottCha?

Snowden's answer is pretty thorough.

To configure the IPv4 DHCP relay agent
1. In the Routing and Remote Access MMC snap-in, expand IPv4, right-click General, and then click New Routing Protocol.
2. In the New Routing Protocol dialog box, select DHCPv4 Relay Agent, and then click OK.
3. In the navigation pane, right-click DHCPv4 Relay Agent, and then click New Interface.
4. Add the network interfaces on which the server might receive DHCPv4 requests that you want to send to the DHCP server. Right-click DHCPv4 Relay Agent, click New Interface, select the appropriate network interface, and then click OK.
5. In the DHCP Relay Properties dialog box, select Relay DHCP packets, and then click OK.
6. In the navigation pane, right-click DHCP Relay Agent, and then click Properties.
7. On the General tab, enter the IPv4 address of the DHCP servers that you want to provide DHCP services for the RRAS server's clients, click Add, and then click OK.

http://technet.microsoft.com/en-us/library/dd469685.aspx

MHx

Monday, October 14, 2013 8:10 PM UT

Thanks ScottCha,

I am taking the test on Thursday, so will report back in your new exam thread when it pops up.

Mike

Monday, October 14, 2013 7:46 PM UT

Thank you very much ScottCha

ROD

Monday, October 14, 2013 6:53 PM UT

Thanks so much Scottcha, please anyone as soon as you do the exam and test this VCE let us know how it goes. please post # of new questions and score obtained.

ScottCha

Monday, October 14, 2013 6:02 PM UT

Ok. I put my file out on DropBox:

https://www.dropbox.com/s/zuaxqqkfiepuvsy/70-410-ScottCha-All-Questions-Working-231q.vce

I worked very hard on this and all of the questions are working correctly.

If this file is useful please come back and vote for it and leave constructive comments.

Suko

Monday, October 14, 2013 2:57 PM UT

ScottCha, you can use Dropbox for example. It´s free and easy. Thanks

Eric

Monday, October 14, 2013 2:49 PM UT

@sventek, most of the questions will be asked from this dump and from snowden dump, what I have read over here. Most questions from Snowden are correct. From this dump multiple questions are wrong. You can use snowden's dump to compare with this dump and use TechNet.

Eric

Monday, October 14, 2013 1:50 PM UT

@sventek, sorry have no gtalk and/or facebook

Mr.L

Monday, October 14, 2013 1:46 PM UT

Hi ScottCha, we are waiting, thank you, its much appreciated.

Sventek

Monday, October 14, 2013 1:32 PM UT

@Eric can you give me ur GTalk or Facebook ?

Need to ask you something

Thanks

ScottCha

Monday, October 14, 2013 12:06 PM UT

I'll be happy to, however, I have never used and upload center before. Can you guys recommend one that is easy to use? Once I load it there please come back to my new upload here and post your comments and votes. Thanks.

Suko

Sunday, October 13, 2013 7:20 PM UT

ScottCha, i'm with Mike. Let we know if passguide is good. I´ll take the exam in 1 week. In 8 days you can see my feedback.

Mike

Sunday, October 13, 2013 1:34 PM UT

ScottCha please let us know if passguide questions were correct.
Thanks

ScottCha

Sunday, October 13, 2013 1:37 AM UT

Ok. Just bought and formatted the latest passguide exam for 70-410. I am taking this test in 2 weeks and needed some assurance I have the best chance possible in passing. I've had good experience with passguide and hope the answers are correct. Look for the test in the next day or so. It has 231 questions.

Eric

Friday, October 11, 2013 1:39 PM UT

Your network contains an Active Directory domain named contoso.com.

You have a Group Policy object (GPO) named GPO1 that contains several user settings. GPO1 is linked to an organizational unit (OU) named OU1.

The help desk reports that GPO1App1ies to only some of the users in OU1.

When you open Group policy management you see the following
-policy applies to authenticated users
-On OU1 blocked inheritance is enabled
-This it the only gpo applied in the OU

Options:
A.Modify the Security settings of GPO1.
B.Disable Block Inheritance on OU1.
C.Modify the GPO status of GPO1.
D.Enforce GPO1.

Answer in dump is A. But on authenticated users the policy is applied. So I don't think you need to change the security settings

What do you what the answer should be?

Eric

Friday, October 11, 2013 12:36 PM UT

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012. You create a security template named Template1 by using the Security Templates snap-in.

You need to App1y Template1 to Server2.

Which tool should you use?
Options:
A.Local Security Policy
B.Server Manager
C.Authorization Manager
D.Security Templates

Answer in dump: B
I would say A: you can import the .inf into the local security policy of server2

shally

Friday, October 11, 2013 7:14 AM UT

this dump has current question.just need correction of answers.wrote yesterday

CopperHead

Friday, October 11, 2013 12:20 AM UT

Lot of dumps flooding the page without a single comment from author it self. Which dump has most accurate questions? So we can correct it and upload single dump people can rely on.

Eric

Thursday, October 10, 2013 10:42 AM UT

You need contains an Active directory domain named contoso.com .The domain contains server named server1.
You need to create 3TB VHD on server1?
Computer management>disk management

Other you can use is Disk part. So if you see a similar question with that option, you can choose that one

Eric

Thursday, October 10, 2013 10:41 AM UT

You need to create four external virtual switchs in Hyper-V. I would say Remove-NetlbfoTeam. First remove the teaming in order to create 4 external switches

Havana Le

Thursday, October 10, 2013 2:26 AM UT

You need contains an Active directory domain named contoso.com .The domain contains server named server1.
You need to create 3TB VHD on server1?
A. Diskpart
B.Share and storage management
C.Computer Management
D.New-VirtualDisk
E.Server Manager

Im so confuse for this question.
Plz help me confirm it.
thanks

Havana Le

Thursday, October 10, 2013 2:20 AM UT

You need to create four external virtual switchs in Hyper-V
A.Remove-NetlbfoTeam
B.Add-VMnetworkadapter
C.Add-NetlbfoteamNic
D.Set-Netadapter
My answer : C.Add-NetlbfoteamNic

Anyone confirm?
thanks

MHx

Wednesday, October 09, 2013 5:01 PM UT

@ ROD - Did you happen to create a VCE with Snowden's answers, and the new answers from this one?

Or are you able to let us know what ones are the new ones from this one, and I will create a VCE with the correct answers?

Thanks!!

Mark

Wednesday, October 09, 2013 1:18 PM UT

Passed today with 715 using this vce.

Eric

Wednesday, October 09, 2013 7:24 AM UT

@coment, I know that answer is correct also. But if you use the Local group policy editor, you can under computer configuration>windows settings>security settings>local policies>user rights assignment you can add the user to the "restore files and directories" policy

coment

Wednesday, October 09, 2013 7:17 AM UT

@eric A. Just insert the user on Backup Operators Group.

Eric

Wednesday, October 09, 2013 6:41 AM UT

You have a file server named Server1 that runs Windows Server 2012.

You need to ensure that a user named User1 can use Windows Server Backup to create a complete backup of Server1.

What should you configure?
A. The local groups by using Computer Management
B. A task by using Authorization Manager
C. The User Rights Assignment by using the Local Group Policy Editor
D. The Role Assignment by using Authorization Manager
Answer: A,
I would also say that C is possible
What do you think?