Microsoft.Various.70-648.v2012-03-15.by.Ginger.406q.vce

worriedsick

Thursday, August 30, 2012 1:58 PM UT

please tell me that 70-648 did not include DNS etc, as under skills measure, its not stated there http://www.microsoft.com/learning/en/us/exam.aspx?id=70-648&locale=en-us#tab1

Master

Saturday, August 18, 2012 8:49 AM UT

I passed this exam today. I learned from:
640: http://www.examcollection.com/microsoft/Microsoft.BrainDump.70-640.v2012-07-04.by.Magican.398q.vce.file.html
642: http://www.examcollection.com/microsoft/Microsoft.BrainDump.70-642.v2012-07-25.by.Anonymous.314q.vce.file.html

SJ

Tuesday, July 24, 2012 3:45 PM UT

Pls ignore earlier comment
Hello everyone. I passed yesterday. Got 957 in 70-642 and 812 in 70-640. I learned Andyfx402 q from 70-640.
MohamedG 280q + Anonymous 15q from 70-642.
Also there are new questions added.
640 - http://maxbox.maxlc.com/Exams/70-640/
642 - http://maxbox.maxlc.com/Exams/70-642/
For anwers see the comments on 70-640 Newton 329q

Refer them thoroughly.
I had some time so I went through 70-648 Gomas dump too.
Please verify all answers from all dumps from Microsoft TechNet as quiet a few are wrong.

SJ

Tuesday, July 24, 2012 3:40 PM UT

Hello everyone. I passed yesterday. Got 957 in 70-642 and 812 in 70-640. I learned Andyfx402 q from 70-640 + MohamedG 280q + Anonymous 15q. Also there are new questions added.
640 - http://maxbox.maxlc.com/Exams/70-640/
642 - http://maxbox.maxlc.com/Exams/70-642/
For anwers see the comments on 70-640 Newton 329q

Refer them thoroughly.
I had some time so I went through 70-648 Gomas dump too.

You will find different answers. Please verify them on Technet as many answers are incorrect.

p.andrew

Monday, July 23, 2012 4:21 PM UT

@hyp,i have already done the 646 since 22nd june

hyp

Monday, July 23, 2012 6:38 AM UT

@p.andrew: Congrats! Lets take 70-646 to earn MCITP! :D

p.andrew

Wednesday, July 18, 2012 7:02 PM UT

@hyp,thanks a lot i got my exam today .i have learnt andyfx402q for 640,mohamed 12.12.2012 280q +15q anonymos for 642

hyp

Wednesday, July 18, 2012 11:21 AM UT

@p.andrew: hey man, whats up?

p.andrew

Saturday, July 14, 2012 6:56 AM UT

@hyp,thanks a lot

hyp

Saturday, July 14, 2012 5:57 AM UT

@p.andrew: The first part was 27 question from 070-640 and every question is in the andyfxv2 dump. The second part of the exam is 30 question from the 070-642 and only 1 new question was there, and all other from Mohamed dump. Learn these and you will success! I think Newtons dump too old.

p.andrew

Saturday, July 14, 2012 12:36 AM UT

@hyp,hi please tell me i have already learn newton dump +andyfx35q for 640 so i want to ask you if the question are coming from the 4 or 5 last exam of andyfx402q.640 and also tell if all the questions of 642 are coming from mohamedG280Q ?.thanks a lot and congrat for yr exam.

hyp

Friday, July 13, 2012 7:24 PM UT

402q
good luck!

p.andrew

Friday, July 13, 2012 6:09 PM UT

@hyp ,please tell me which version of andyfx should we looking for?the 402q?401q?or 35q?please tell me.i have my exam tuesday the next week .thanks

hyp

Friday, July 13, 2012 1:46 PM UT

Passed today 781/1000 :)
I learned from 70-640 Andyfx v2
and 70-642 v12.05.2011 280q MohamedG
100% valid dumps!!! Thanks guys!

Shadowner

Friday, July 13, 2012 8:48 AM UT

Guys and Gals,

I just found out which topics are examed on the 70-648 exam.

The topics are:

Exam 70-640: TS: Windows Server 2008 Active Directory, Configuring

Configuring Additional Active Directory Server Roles (11 percent)
Maintaining the Active Directory Environment (15 percent)
Configuring Active Directory Certificate Services (14 percent)

Exam 70-642: TS: Windows Server 2008 Network Infrastructure, Configuring

Configuring IP Addressing and Services (24 percent)
Configuring Network Access (22 percent)
Monitoring and Managing a Network Infrastructure (14 percen

see http://www.microsoft.com/learning/en/us/exam.aspx?ID=70-648&locale=en-us

Maybe this helps in your study for you all

kdm

Wednesday, July 11, 2012 6:41 PM UT

@sj ,no just learn what is beneath

SJ

Wednesday, July 11, 2012 3:10 PM UT

@ kamdx. Thx a lot. So there is no need to got through any of the 70-648 dumps??

kamdx

Wednesday, July 11, 2012 1:20 AM UT

@sj hi, just learn the 70-640 newton 329q+andyfx35q and the 70-642 mohamed 280q+ 70-642by anonymos 15q. You will pass learn to do it as soon as possible because i don't if they can change again the questions.

SJ

Wednesday, July 11, 2012 1:02 AM UT

Hello everyone,
I am going to give this exam second time. First time I failed marginally by 2 questions. I had refered to Gomas, gosha, kevin dumps. Can you all advise me how is the 2nd attempt and which dumps to refer to. Thx in advance.

nwtreade

Sunday, July 08, 2012 11:03 AM UT

please post a new dump ..tjis one is not valid .or someone can tell us how study this dump???? thanks

jean

Saturday, July 07, 2012 8:51 AM UT

not valid dump

andrews

Thursday, July 05, 2012 6:57 PM UT

@whoks please tell me when you went to write your exam?i want to make sure that the questions have not changed

Whoknowsit

Thursday, July 05, 2012 12:38 PM UT

Guys look at the KevinWang 150q dump i had about 60-70% of all questions from this dump and almost 90% from the 70-624 is in it from exam.

something to say to me mail is my username @ live . nl

hilar

Thursday, July 05, 2012 9:59 AM UT

please this dump is not valid.

hkunap from nigeria

Wednesday, July 04, 2012 4:21 PM UT

I need 70-648 valid dumps if any
have valid dumps so kindly upload it.or tell us where we can download

garxilm from germany

Wednesday, July 04, 2012 4:15 PM UT

please don't go to write with this dump its 10 or 15 % valid so it is very risky.lol

adolflung

Wednesday, July 04, 2012 4:10 PM UT

i have done the exam last week it wasn't valid. Wait for a valid one

h

Wednesday, July 04, 2012 3:46 PM UT

its not valid.fail

andrews

Wednesday, July 04, 2012 3:43 PM UT

there is a long time that this dump is not valid i am waiting for a new since a month ago

johns from usa

Wednesday, July 04, 2012 3:27 PM UT

hoooo,i hav finished to learn ginger dump and its not valid please upload a new or tell me how can i do to pass the exam.thanks

yang xun from vietnam

Wednesday, July 04, 2012 3:22 PM UT

not valid in vetnam.i am looking for new

mohamedk

Wednesday, July 04, 2012 3:16 PM UT

i failed there is a lot of new questions 10percents valid

nabil

Wednesday, July 04, 2012 3:13 PM UT

this dump is not valid please .failed yesterday

andrews

Wednesday, June 20, 2012 3:59 PM UT

h@ rich j please tell me if it was only the exam D in the 640 when you writting your exam 648

Rich J

Tuesday, June 19, 2012 3:29 PM UT

Passed this today with a score of 850. Studied the latest newton dump for the 640 part and the Jack dumo for 642. All the questions came up. Same as before, lots of certificate questions so nail them before sitting exam.

whoknowsit

Friday, June 15, 2012 10:42 AM UT

i didnt in both times

Rog

Friday, June 15, 2012 6:10 AM UT

Did you guys get DNS questions?

whoknowsit

Thursday, June 14, 2012 9:38 AM UT

Yeah i can confirm atleast in netherlands that about 80% of questions are in kevinwangs dump and the rest in this dump! or you should try the 640 newton dump these 3 together should do the trick!

Shadowner

Thursday, June 14, 2012 7:08 AM UT

Hi Guys,

I just did my exam yesterday and I failed.
Got a lot of IPv6 questions which were very hard.
Also I got a lot of questions about the different tools you can use and what tool you should use for task x and what for task y.

Got some questions from Kevin Wang's dump and from Gingers dump.

Got my retake on the 30th July.

Bob

Monday, June 11, 2012 1:58 AM UT

Im' taking 70-648 in a week. That's a combination of 640 and 642. Does anyone know if Microsoft simply reuse the questions from 640 and 642 for the 648 exam? So can I study a 640 and 642 dump and get those questions in the 648 exam??

lolobail

Saturday, June 02, 2012 8:50 AM UT

oups .. when they update their pdf..

Farhan

Friday, May 25, 2012 7:10 AM UT

I need 70-648 valid dumps if any have valid dumps so kindly email me.. Thanks

badtimmy88

Wednesday, May 23, 2012 8:55 AM UT

@Marco, I wouldn't even waste time, rather take them singly and have a guaranteed pass, then attempt to apply such a broad range of material to such a broad range exam.

They can ask anything and but not passing one could mean a fail. Rather take seperately, there's no difference, except doing all in one for less price.

Marco

Tuesday, May 22, 2012 10:22 AM UT

I've to do this exam next month, I think is better to prepare singly the 70-640 and 70-642 and then do the exam 70-648. their statistics are all positive. What do you think?

badtimmy88

Monday, May 21, 2012 10:20 AM UT

Hi

I have recently wrote this end of last week.

Aced the 640 part and narrowly failed the 642 part.

642 was heavily focused on multiple VPN, DAS and a few IPv6 questions.

Should I not past this exam a second time, I will take them seperately, which I should not happen as I have done my fair share of reading the entire book diligently and using a couple of dumps. Ran out of time for infrastructure dumps testing in detail.

Mohit

Monday, May 21, 2012 3:38 AM UT

hi all i had a question i am preparing for 70-648.but i am learning it as 70-640 and 70-642.so should i be giving the 70-648 paper directly or separate,i am kind of trying to save the money,so is it advisable to learn the dumps of 70-640/642 and give 70-648. or learn the dumps of 70-648 but i dont see many people giving that .and the success ratio 0f 70-648 passing is less.Guidance Needed.Thanks

Ricks_shaft

Saturday, May 19, 2012 12:21 PM UT

@mike

Yes, I that exactly what I am going to go. I always ace the 642 exam and fail the 640 exam.

Mike

Thursday, May 17, 2012 8:57 PM UT

I have a question? Can we take maybe better first 70640 exam and then 70642 exam seperately for MCITP? I think this is easier way

REX

Tuesday, May 15, 2012 2:24 PM UT

Hi, I Think in Q:
Your network contains an Active Directory domain. All domain controller run Windows Server 2003.
You replace all domain controllers with domain controllers that run Windows Server 2008 R2.
You raise the functional level of the domain to Windows Server 2008 R2.
You need to minimize the amount of SYSVOL replication traffic on the network.
What should you do?
A. Raise the functional level of the forest to Windows Server 2008 R2.
B. Modify the path of the SYSVOL folder on all of the domain controllers.
C. On a global catalog server, run repadmin.exe and specify the KCC parameter.
D. On the domain controller that holds the primary domain controller (PDC) emulator FSMO role, run
dfsrmig.exe.

Answer should be C not D?

Uknown Staff

Monday, May 14, 2012 12:59 PM UT

I was wrong about Gingers dump..I passed this exam...Try and learn all the questions and u will pass with this dump coz 98 percent of the questions came from this dump..All the best

Memorf

Friday, May 11, 2012 3:26 PM UT

I also Failed for this exam today with an 651 score. Please e-mail me an valid dump. memorf@hotmail.com

Uknown Staff

Friday, May 11, 2012 1:46 PM UT

my email address is Zico2g6@yahoo.com

Uknown Staff

Friday, May 11, 2012 1:45 PM UT

I failed this exam today...can anybody email me valid dump with correct answers..i got 669

Mina

Friday, May 11, 2012 7:54 AM UT

then which one we must stick with it for 640 and for 642

REX

Thursday, May 10, 2012 12:05 PM UT

@richj
From technet http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/c361339f-7266-4991-8309-c957a123a455/

Permissions are backed up but links are not. The links are actually properties of the OU and would be backed up as part of the system state. Please see this article for more information: http://technet.microsoft.com/en-us/library/cc784474(WS.10).aspx. The article refers to the GPMC process which is the same as the PowerShell cmdlet.

richj

Thursday, May 10, 2012 11:31 AM UT

Word of warning people. There are quite a few wrong anwers in this dump compared to say the kevin wang dump. Would take a long time to cross reference every question but there are a few wrong answers in there.

Example..
You need to back up all of the group policy objects, group policy permissions and group policy links for the domain.

Answer I know for a fact is d) from group policy management console, backup up the gpos.

Just be careful. I knew the answer in this dump was wrong so I checked it on technet. If you think something is possibly wrong, check it first before hand!

You would be unfortunate to say get all of the questions that are answered wrong in the dump, in the exam. But its worth checking!

Rex

Tuesday, May 08, 2012 4:14 PM UT

WhoKnowsIT check mail.

WhoKnowsIT

Monday, May 07, 2012 11:14 AM UT

Is there anyone who can edit dump?

Please mail me my nickname @ live.nl

I can help create the best dump there is ;)

IdontknowIT

Monday, May 07, 2012 7:14 AM UT

you get 2 parts, both have 30 questions, i had none simulations, only 2 drag/drops

Mina

Sunday, May 06, 2012 6:13 PM UT

how many Question per part and there is testlest and simulation or not?

please help

Hassu

Friday, May 04, 2012 3:09 PM UT

I passed this exam today. ALL the questions were from this dump. This in Finland.

leelo

Friday, May 04, 2012 3:49 AM UT

@TomasT
I did pass and not fail, regarding Dumps Plz Look @ WhoKnowsIT from Netherlands comment. as i agree with him.

WhoKnowsIT

Thursday, May 03, 2012 6:27 PM UT

Again mate specially for you.

For the 70-640 part learn the Newton dump

the rest of the questions for the 648 exams can all be found in the 150q dump from KevinWang

Rex

Thursday, May 03, 2012 5:26 PM UT

Hi,
I'm taking exam in 2 weeks, now I'm confused which one dumps use to study. Maybe someone tell me if better use 2012-03-01.by.Newton.329q for 70-640 part and v2011-12-12.by.mido.280q for 70-642 part, are there any more questions in 70-648 exam?
Thanx in advance.

WhoKnowsIT

Thursday, May 03, 2012 8:08 AM UT

IdontknowIT from Netherlands are we twin brothers? :P

I had almost exact same thing!!?!?! failed on 70-640 part too with almost exact same score i passed for the other part! damnnit although we need to do that part again now too!

Leelo i think your absolutly right! 70-640 part from Newton and the KevinWang dump you should definitly pass the exam!

TomasT

Thursday, May 03, 2012 8:05 AM UT

IdontknowIT/leelo.. did you fail using this dump? Would be good to know so we can avoid this dump if not valid! Thanks

IdontknowIT

Wednesday, May 02, 2012 6:05 PM UT

I've failed the exam today. I passed the 70-640 part but failed the 70-642 with a score of 687. I had 15 Certificate questions. practice those!!!

leelo

Wednesday, May 02, 2012 4:39 PM UT

@Blackberry
I used KevinWang's dump with the 150q's with Newton.329q from 70-640

Blackberry

Wednesday, May 02, 2012 3:50 PM UT

@leelo.did you use this dump together with Newton.329q from 70-640?

leelo

Wednesday, May 02, 2012 3:34 PM UT

just passed today exam 070-648

I agree with WhoKnowsIT from Netherlands, but also you need another dumps, in this case i think Newton.329q from 70-640 is more than enough, another issue make sure from incorrect answer

luck all you

Richj2k

Wednesday, May 02, 2012 1:48 PM UT

WhoKnowsIT.Are you saying this particular dump isnt valid?

WhoKnowsIT

Tuesday, May 01, 2012 7:39 AM UT

i did exam last week and again more then 50% from the exam questions were from KevinWang's dump with the 150q's i really hate it to see that there are so many people which i gave information about this exam to help them they didn't even take the time to give us feedback so they can help others in return c'mon guys we need to help eachother out!, you came here to get help then take a second to help other in return! after you did or passed the exam.

Archy

Monday, April 30, 2012 5:42 AM UT

@Ginger: How did the 26th go? I plan on taking it next month on the 26th. What happened to your final version?