Microsoft.Testking.70-410.v2013-09-22.by.Esso.336q.vce

je

Friday, October 11, 2013 4:51 PM UT

Do not use this! answers are totally wrong. you will unlearn 70-410 and fail examn

George

Monday, September 30, 2013 5:55 AM UT

Guys, When I wrote the exam previous saturday, for a few of the questions, the answer options itself were not working. Exam center support staff were helpless though I notified them. Can we raise an appeal at Microsoft? Any pointers would be helpful.

George

Saturday, September 28, 2013 8:54 AM UT

Failed with 665. Majority of the questions came from this dump, but answeres were different :( So please double check the answers with a valid source, before writing the exam

Concerned

Saturday, September 28, 2013 8:02 AM UT

hy guys plz help, i wrote dis exam on the 13th of august and i failed. i used the navishki dump, it was the same as snowden bt a lot of questions were changed..plz help me out with the new and valid dump, i need to go and do my rewrites

Geoin

Saturday, September 28, 2013 2:06 AM UT

I passed yesterday. Thank you for your questions.

Esso

Friday, September 27, 2013 12:57 PM UT

guys read snowden and remeber his answer well and if u found the same question here with different answer choose snowden's ans.

good luck

Johan

Friday, September 27, 2013 11:58 AM UT

Valid dump! Passed with 745.

Matt

Thursday, September 26, 2013 3:57 PM UT

Failed with 696. A lot of IV6 Subnetting and routing questions. I would say around 10. About 15 questions were found in this dump

david

Thursday, September 26, 2013 2:32 PM UT

@ esoo and everybody else who passed it

i am confused, study this dump is enough to pass, or snowden dump is more accurate or both of them are required.

thank you

Raaf

Thursday, September 26, 2013 6:59 AM UT

@802.11

In the other posts we have posted alot of corrected questions.
As the dump is now I would not trust it

802.11

Wednesday, September 25, 2013 6:11 PM UT

@Esso, sorry to bug you. I take the exam tomorrow. Did you have questions from the snowden dump? Also how accurate do you think the new questions are in thisdump?

Javed DXB

Wednesday, September 25, 2013 5:58 PM UT

@Esso Snowedn 429Q??????

Esso

Wednesday, September 25, 2013 5:54 PM UT

@jave i passed the exam from couple hours the exam is real but read snowedn dump coz the answer more accurately than here

Javed DXB

Wednesday, September 25, 2013 5:46 PM UT

I wan to appear in Exam Next week please help me!
These Dumps are valid or not.
Thanks in Advance

Esso

Wednesday, September 25, 2013 5:43 PM UT

Thx @802.11
Most of answer i do same here and about 3 or 4 i didn't answer like here
Pass with 700 :-) hope u pass it too and all ppl

802.11

Wednesday, September 25, 2013 5:33 PM UT

@Esso. Congrats on your pass. Where the answers to the questions exactly like they are in the dump?

Esso

Wednesday, September 25, 2013 5:08 PM UT

Valid dump pass today

Esso

Wednesday, September 25, 2013 11:25 AM UT

Q 248

when u deploy cmd Remove-windowsfeature server-GUi-shell

file Explore (unavailable)
internet explore 10 (unavailable)

802.11

Wednesday, September 25, 2013 9:05 AM UT

By reducing the size of RAM on a VM. Would it affect the size of the snapshot?

Anon

Wednesday, September 25, 2013 6:22 AM UT

This Dump has valid questions. pass today in australia with 760. Not all Answers are correct in this dump though. Thanks!

Esso

Wednesday, September 25, 2013 5:04 AM UT

@jan-mcsa what is the no. ?

Andrew

Wednesday, September 25, 2013 1:49 AM UT

Sorry I mean #284

Andrew

Wednesday, September 25, 2013 1:46 AM UT

#58 is wrong. IE10 is not included in the Windows Server 2012 minimal install.

jun-mcsa

Tuesday, September 24, 2013 11:52 PM UT

@ esso
could you answer my question bro ?
i am preparing for it, and I'd like to know how accurate are the answers in this dump

Raaf

Tuesday, September 24, 2013 5:29 PM UT

@thedarkknight

I think thats what he meant because in the file there's a different answer stated as being correct.

joe

Tuesday, September 24, 2013 4:19 PM UT

@miami think about what it is DNS does. The reason why "." works is because that is the top of the DNS tree. What your doing is telling DNS that nothing else exists. So if it doesn't have a zone there is nowhere else to go. I think creating "roor" just created a zone named root. So you could have A records like computername.root. Also I think there are a lot of wrong answers in these dumps, but having failed the exam I can say the questions are valid, just takes a little work.

usta

Tuesday, September 24, 2013 4:03 PM UT

This dump valid, study this 336 question same questions same answers.

Thank you guys I passed 2 hours ago with 820

Miami

Tuesday, September 24, 2013 3:27 PM UT

@joe, thank you for your response.
I think this (primary named ".") is the right answer too. Someone tried it and got the same result: greys out forwarders and root hints.
But, why so many times the same wrong answer. Even, I find the same answer in many sites.
My question is, can I create a stub zone name "root"?? What is the effect??
Can you try this??

joe

Tuesday, September 24, 2013 3:11 PM UT

@Miami I think the answer is primary named ".". I tried it in my lab and this one worked it even greys out forwarders and root hints.
@darknight, That's what he is saying you NEED to use set-adgroup. It actually says in the technet article on rename to use set to change samaccount.

thedarkknight

Tuesday, September 24, 2013 2:32 PM UT

@mike , why dont you just check the powershell command ?
set-adgroup CAN set the samaccountname

NAME
Set-ADGroup

SYNOPSIS
Modifies an Active Directory group.

SYNTAX
Set-ADGroup [-Identity] <ADGroup> [-Add <hashtable>] [-Clear <string[]>] [-
Description <string>] [-DisplayName <string>] [-GroupCategory <System.Nulla
ble[Microsoft.ActiveDirectory.Management.ADGroupCategory]>] [-GroupScope <S
ystem.Nullable[Microsoft.ActiveDirectory.Management.ADGroupScope]>] [-HomeP
age <string>] [-ManagedBy <ADPrincipal>] [-Remove <hashtable>] [-Replace <h
ashtable>] [-SamAccountName <string>] [-AuthType {Negotiate | Basic}] [-Cre
dential <PSCredential>] [-Partition <string>] [-PassThru <switch>] [-Server
<string>] [-Confirm] [-WhatIf] [<CommonParameters>]

Miami

Tuesday, September 24, 2013 2:31 PM UT

A need your help with this questions.
There are a lot of questions (77,111,159,164,206,217,230) with the same introduction:
Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 2012. All of the client computers connect to the Internet by using a web proxy. You deploy a server named Server1 that runs Windows Server 2012.
Server1 has the DNS Server server role installed. You configure all of the client computers to use Server1 as their primary DNS server. You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?

In all questions, except the last one, the answer is the same:
- Create a stub zone named "root".

In the last one the answer is
- Remove all root hints.
- Create a primary zone named ".".

I can't find any information about a stub zone called "root".
Would you explain me, please??

Ibby

Tuesday, September 24, 2013 1:40 PM UT

VALID: I wrote exam last week and failed. a lot of new questions were there and i see those questions in this dump. it looks valid. not sure if the answers are correct.

Esso

Tuesday, September 24, 2013 9:45 AM UT

@kamasi yes man @Hogo convert Robert PDF as it i think no change happen to it and i think this vce (Robert PDF) is the most vce that contains useful question

@Mike thank you for your explanation

Mike

Tuesday, September 24, 2013 8:02 AM UT

Exam A, Q297 is wrong.
To modify the SAM account name of a group you use Set-ADGroup

http://technet.microsoft.com/en-us/library/ee617225.aspx

The Rename-ADObject cmdlet renames an Active Directory object. This cmdlet sets the Name property of an Active Directory object that has an LDAP Display Name (ldapDisplayName) of "name". To modify the given name, surname and other name of a user, use the Set-ADUser cmdlet. To modify the Security Accounts Manager (SAM) account name of a user, computer, or group, use the Set-ADUser, Set-ADComputer or Set-ADGroup cmdlet.

kamasi -kuwait

Monday, September 23, 2013 7:59 PM UT

@esso are the errors from Robert PDF fixed in thi dump?

Mohamed

Monday, September 23, 2013 7:35 PM UT

100% valid dump, thanks

Esso

Monday, September 23, 2013 3:35 PM UT

masha Allah nice Mohamed
the exam look like this or their big different

mohamed

Monday, September 23, 2013 3:12 PM UT

hi,
Masha Allah I passed the with 920 marks, thanks

Esso

Monday, September 23, 2013 1:59 PM UT

This is Robert PDF
And Hogo convert it ti vce

Thank you guys 💙💙