Microsoft.Testking.70-342.v2013-08-10.by.Mike.116q.vce

Rma

Saturday, May 30, 2015 6:44 PM UT

This is not enough to pass the test. I purchased exams key.com test as well. There were more right answers but no one seems to have the updated test questions. I had 61 questions, 4 case studies. Almost 20 new questions and some questions reworded to trick you.

YJ

Thursday, May 28, 2015 10:30 PM UT

Failed today 4XX... 20 or so new questions. Tough exam.

DAN

Thursday, March 05, 2015 8:15 PM UT

Is this dump still valid ??

lol

Sunday, December 07, 2014 2:10 PM UT

valid.. I passed today with 792

Ali Raza

Tuesday, November 18, 2014 2:12 PM UT

passed with 700 score. 2 much lucky day for me

dk

Tuesday, September 09, 2014 6:10 PM UT

any one have dump4certs 70-342?

GuruChaman

Monday, July 07, 2014 10:03 AM UT

Passed with 792, all questions from dump. Valid dump although some answers are wrong, is enought to pass.

Kaisar

Sunday, June 29, 2014 10:46 AM UT

Is this dumps is valid in bangladesh??

Kaisar

Friday, June 27, 2014 7:51 PM UT

is it valid in Bangladesh till now?

oldl

Tuesday, June 03, 2014 4:52 PM UT

this dump is valid, but is necesary doing correction, is poor the score 55.
PD: I passed

anony

Wednesday, May 28, 2014 9:06 AM UT

is this dump still valid??

Christine J. Braggs

Monday, May 12, 2014 4:23 AM UT

@ Ricardo
Hello,
Where can I find this Braindump2go dump or someone can provide me a Braindump2go 70-342 Dump?
Thank you in advance!

Ricardo

Wednesday, May 07, 2014 12:05 AM UT

Changed any answer?? Dump is valid??

Suresh

Tuesday, May 06, 2014 12:29 PM UT

Passed 723

Shokry ahmed

Sunday, May 04, 2014 1:28 AM UT

Passed with 746 (3-5-2014)
this dumps is valid
Exam as follows :
52 Q - time :135 m
4 Q & 5 Q & 31 Q & 4 Q & 4 Q & 4 Q
One question from the outside And
Four questions to answer in change
Thank you Mike good luck

urwatilwusqa

Monday, April 28, 2014 3:55 PM UT

Passed with 7xx...this dumps is valid..the thing only required to get the answers in the mind properly because they use the technique by using same multiple answers so the candidate will got confuse a lot...so dont take hurry...take proper time to questions ans answers.by this dumps..you can take 800+ with no doubt..also try to practice drag and drop questions...Wish you all good luck..

kabouter

Sunday, April 27, 2014 11:57 AM UT

Passed with 792 used only dump of LouCiefer. Thank you LouCiefer

faisal

Sunday, April 27, 2014 11:38 AM UT

Passed 79-342 with 792 marks by using only Mark dump questions from sharjah. Examcollection is the best site. Please help others and post comments

Alward

Tuesday, April 08, 2014 8:05 AM UT

Hiii All
Any new one passed this dump????

Plz Advice

Muhammad Usman

Saturday, April 05, 2014 11:11 AM UT

Alhamdulillah yesterday I passed this exam successfully and got 815 marks. These dumps are still valid and also read the comments in answers carefully.

Leo

Wednesday, March 12, 2014 4:10 PM UT

Does anyone tryied the premium vce yet???

Nopi

Thursday, February 20, 2014 7:14 AM UT

Hello,

Where can I find this Lucifer dump?
Thank you in advance!

Laxjoey

Thursday, February 20, 2014 7:04 AM UT

Hello All, I could not find Louciefer's dump in here. Where is it hiding?

externalaccess

Wednesday, February 19, 2014 3:34 PM UT

who is louciefer? and where can i find his dump?

zklkkn

Tuesday, February 18, 2014 12:26 PM UT

I used LouCiefer his dump to study and passed with 815, thank you LouCiefer and Mike

so

Wednesday, January 29, 2014 2:44 PM UT

@ Booga
Proseware Q6: I think Domain Security should be the correct option because currently there is no s/mime option in 2013 webapp.

so

Wednesday, January 29, 2014 2:38 PM UT

Proseware, Q9: I think the correct answer is b: set-mailboxserver (to enable group metrics and display the mailtip immediately)
set-distributiongroup is needed for custom mailips which IMHO is not the question here.

LostInBKK

Tuesday, January 28, 2014 6:59 AM UT

Can someone confirm the status of this dump please

Cheers
lost

Fady

Sunday, January 26, 2014 9:35 PM UT

Is this exam valid in egypt ?

Ehehe

Wednesday, January 15, 2014 10:50 PM UT

Contoso - Q6 - we have the information that DAC mode is enabled, shouldn't the answer be - 1. Stop-DatabaseAvailabilityGroup 2. Restore-DatabaseAvailabilityGroup 3. Start-DatabaseAvailabiltyGroup ? It's in that article - http://technet.microsoft.com/en-us/library/dd979790%28v=exchg.150%29.aspx (section "Other benefits of DAC mode)

the g

Wednesday, January 15, 2014 8:12 AM UT

@ booga - re Proseware Q10

agree totally, I had already changed that answer to delegate/send as

Booga

Thursday, January 09, 2014 4:28 PM UT

A. Datum case:
-All answers look ok.

Contoso case:
-Q1 - I believe the correct answer is E - create a remote domain http://technet.microsoft.com/en-us/library/aa996309(v=exchg.150).aspx
Remote domains support Outlook 2007/2010 clients for OOF settings. No need to upgrade the 2007 clients IMHO.
-Q3 - Very tricky. Since the question asks for 3 actions to perform, I'm inclined to agree with the answer in the dump. However "new-federationtrust" must be used, so thoughts?
-all other answers look ok.

Fabrikam case:
-Q5 - I don't see how disabling all but the two "allow override" rules is the answer. The requirement is to block all PII/financial data...so why not just turn off the "allow override" rules and leave the rest on to scan/do their job? thoughts?
-Q6 - Why is the answer to prevent the owner save as? Wouldn't it be to disable the one for anyone?
-Q4 - dump answer is for MAPI network...they want DAG replication...answer should be BD
-all other answers look ok.

Proseware case:
-Q9 - verified, however set-organizationconfig is used to modify the large audience counts...
-Q4 - Order has to be wrong in the dump. You can't run the New-UMAutoAttendant cmdlet that calls the UMDialPlan if the UMDialPlan isn't created yet...it'll error. I think it should be:
http://technet.microsoft.com/en-us/library/jj673564(v=exchg.150).aspx
-New-UMDialPlan ...
-New-UMAutoAttendant -Name ProsewareAA...
-New-UMAutoAttendant -Name ProsewareDTMFAA...
-Set-UMAutoAttendant -identity ProsewareAA -DTMFFallbackAutoAttendant...
-Q6 - "Users must be able to encrypt email from OWA..." Very tricky. On one hand Domain Security can be used to encrypt email between 2 organizations, but S/MIME is used for encrypting ALL email. Other 2 options are correct. Thoughts??
http://technet.microsoft.com/en-us/library/bb738151.aspx
-Q10 - the "-auditowner" parameter doesn't have a value of "create". In fact none of those given parameters do. Value should be "SendAs", but that takes "-auditowner" out of it. Trying to find out who's sending email as User1, so I'd use the -auditdelegate parameter. Thoughts?
http://technet.microsoft.com/en-us/library/bb123981(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/bb676368(v=exchg.141).aspx
-all other answers look ok.

Trey Research Case:
-Q2 - the "-auditadmin" parameter doesn't have the "create" value available. Thoughts?
I think the answer here should be: set-mailbox legal -auditadmin messagebind,create -auditdelegate harddelete,move -auditenabled $true
http://technet.microsoft.com/en-us/library/bb123981(v=exchg.150).aspx
-all other answers look ok.

Kalai Cheliyan.V

Friday, December 20, 2013 7:03 AM UT

This dump is 100% valid in Qatar. I have passed yesterday with 769 score.
But many answers are wrong from this dump.

Nils

Thursday, December 12, 2013 7:23 AM UT

Not Valid

herbert

Monday, December 09, 2013 8:42 AM UT

NOT Valid

Richard

Monday, December 09, 2013 6:56 AM UT

Hi all,

Scheduled to take my exam next week, any able to provide the pdf please.

e-mail: resmith2013@hotmail.com

Many thank

Richard

Murat

Thursday, December 05, 2013 9:39 AM UT

Still valid. Passed 769

Lee Yun

Wednesday, December 04, 2013 8:52 AM UT

Still valid.

maygoh

Wednesday, December 04, 2013 8:17 AM UT

Still Valid. Passed with scored 769

PS : Pls loot at clear when tick an answer

Koala Trinh

Tuesday, December 03, 2013 2:19 PM UT

Is there any updated ? can any one send me the latest file my email is khoa.trinh@hotmail.com

Thanks for your help

ola

Monday, December 02, 2013 1:42 PM UT

please i need the updated dump too. my email is olatufu@gmail.com. i am writing the exam in next week. thanks

Nolwen

Monday, December 02, 2013 9:34 AM UT

I passed on last Friday 29th with 815.

James

Friday, November 29, 2013 4:19 PM UT

Sorry! Forgot to include an email address. Send the PDF to jmk.mb02@Hotmail.com and I'll work on converting the file to VCE for everyone.

James

Friday, November 29, 2013 4:16 PM UT

Could someone send me the PDF that being mentioned. I would be more than happy to convert it to VCE.

I'm planning on taking this test in the next few weeks.

Nolwen

Friday, November 29, 2013 1:09 PM UT

Just passed it with 8XX. Dump is valid.

El_Packo

Thursday, November 28, 2013 5:56 PM UT

The dump is still valid.

Regards!

Nolwen

Thursday, November 28, 2013 10:51 AM UT

Does anyone send me the guide.pdf please. I will pass the exam tomorrow... I have corrected some questions, but I still have some doubt on few questions.
Please sent it to my mail nolwenfr@hotmail.com

Moin

Tuesday, November 26, 2013 11:28 AM UT

Passed-8xx
All questions from this dump - compare the answers with comments from the other guys an read the technet

Alex

Tuesday, November 26, 2013 9:19 AM UT

Bad Dump ---> Failed!!!!

El Packo

Monday, November 25, 2013 5:38 PM UT

Hi everybody, today I've been passed with 815. This guide works and rocks! :)

Finder

Friday, November 22, 2013 3:20 AM UT

Hi All,

Please send me the pdf finder1947@yahoo.com, why people not updating the dump.

Rams

Thursday, November 21, 2013 12:19 PM UT

Please share the download link Mo-Dee, wanna take the exam ASAP

Moin

Wednesday, November 20, 2013 12:26 PM UT

Passed - 8xx
All Questions from this dump.
Compare the answers from the dump with the comments from the other guys here.
Read the technet.

anonymouse

Tuesday, November 19, 2013 11:11 AM UT

What pdf mo-dee?

SUK1R

Tuesday, November 19, 2013 10:52 AM UT

@Mo-Dee

What PDF are you talking about?

Plz upload and/or post link.

Thanks.

Mackzy

Monday, November 18, 2013 2:29 PM UT

Passed with a score of 814. I suggest using TechNet to verify answers and also read the posts from previous testers.

Mackzy

Monday, November 18, 2013 2:27 PM UT

Passed with 814. I suggest verifying answers using TechNet and reading posts by previous testers.

Mo-Dee

Wednesday, November 13, 2013 1:07 PM UT

Hey guys
i've passed with 769 today,thanks to Mike's dump and the PDF i was using,go to Technet website you will get the correct answers and download that PDF and do some research before you write but i think if it wasn't for the PDF i was using i was going to fail bcoz that dump it is 70% valid,make sure you know all of the answers becoz you will fail (hardluck to the german guys,dont loose hope,just use that PDF while you are still on fire)..wish you all the best guys cheerz!!

SM

Tuesday, November 12, 2013 11:19 AM UT

You can convert the PDF file into VCE format using Visual Cert Exam Designer

Mareike

Tuesday, November 12, 2013 8:40 AM UT

This dump suckz.
Failed 5xx

Jimi

Monday, November 11, 2013 9:57 PM UT

Hello Isa,

One of the answer is missing in the dump for Mixed Questions 17. Here's the full list of answers:

A. Create a UM hunt group.
B. Create a UM IP gateway.
C. Configure the IP-PBX to route calls to EX3 and EX4
D. Configure the IP-PBX to route calls to EX1 and EX2.
E. Assign EX1 and EX2 to UMPlan1.
F. Assign EX3 and EX4 to UMPlan1.
Answer: A,B,C

You can check :
http://www.test4actual.com/news/MCSE70-342Exam.html
http://www.24article.com/Microsoft-70-342-free-dumps.html
http://exam.test4actual.com/70-342.pdf

Isa

Monday, November 11, 2013 4:40 PM UT

For everyone who is failing the exam using just the answers from the dump you need to research each question to verify the answer. It has been stated numerous times on this forum that some of the answers in this dump are not correct but the questions are 100% valid. If you memorize the dump and take the exam you will probably fail. Spend the time to research the answers as all the information and explanations to answers is found on Microsoft TechNet. I was scheduled to take my exam 3 weeks ago but after reading user posts to this forum I postponed it and went and researched the questions to verify answers. I feel confident I will pass the exam first time through because I took the time to understand the questions and researched the topics instead of memorizing and repeating wrong answers. I'm just saying though.

Isa

Monday, November 11, 2013 4:34 PM UT

Mixed Questions 17 - The answer is ACE

Configure IP-PBX to route calls to EX1 and EX2
Create a UM IP Gateway
Configure IP-PBX to route calls to EX3 and EX4

Reason:
A Unified Messaging (UM) IP gateway represents a physical Voice over IP (VoIP) gateway, IP Private Branch eXchange (PBX), or session border controller (SBC) hardware device. Before a VoIP gateway, IP PBX, or SBC can be used to answer incoming calls and send outgoing calls for voice mail users, a UM IP gateway must be created in the directory service.

http://technet.microsoft.com/en-us/library/bb123890(v=exchg.150).aspx

The question states that you need to ensure that all voicemail sent to existing extension (Telephone Extension Dial Plan) of a user is delivered to the user's mailbox.

Microsoft TechNet States:

You can add Client Access and Mailbox servers to SIP URI dial plans. Client Access and Mailbox servers CAN'T be associated with Telephone Extension or E.164 dial plans, but the servers will answer all incoming calls.

http://technet.microsoft.com/en-us/library/aa996399(v=exchg.150).aspx

Hubert

Monday, November 11, 2013 3:03 PM UT

Bad Dump, all questions ok, but many answers are not valid.

Niko Meyer

Monday, November 11, 2013 3:01 PM UT

Dump is not valid, fails with 568...

Larry Newman

Monday, November 11, 2013 3:00 PM UT

ATTENTION, Dump is notvalid! Fails with 574!

Angelo

Monday, November 11, 2013 2:59 PM UT

BAD dump --- failed 6xx

Huberto

Monday, November 11, 2013 2:58 PM UT

This dump ist defenetly not correct.
Failed

spirit_of_the_hawk

Saturday, November 09, 2013 1:34 PM UT

Still valid 100% same question
passed 769

akobross

Friday, November 08, 2013 6:03 AM UT

hello friends any good news about this dump ,,,, i want to do the exam next week

Alex

Thursday, November 07, 2013 9:02 AM UT

NOT Valid.
To many fault questions!!!

mike

Thursday, November 07, 2013 8:45 AM UT

pass 769 dump is valid no new questions

noor-iraq

Friday, November 01, 2013 10:28 AM UT

I passed with score 769 . this damp is valid .

Anonymous

Friday, November 01, 2013 5:06 AM UT

hallo everyone.
new mixed Q 2 :
i think that the last answer should be " a journal role" becuse role policy can be assign only for user mangment and not for administrative managment.

contoso Q 8 : im nut sure that this is the right answer. becuse i have to type " new federation trust" to create a trust. i can pipe it in after the "get-exchangecertificate, but i dont think that what thay mean.
mixed Q 17 :i think that the answer is A B C . pbx route to CAS SERVER that hold the UM GATEWAY and the mail box server assign to the DIAL PLAN.

suggestions anyone?

tohotom

Tuesday, October 29, 2013 9:12 AM UT

Claut from Italy - Oct 16 2013, 7:57 Wrote:
"
My score regarding UM was 100% so the solution proposed by me about Proseware Q 4 and by Gerry was correct for sure
Box 1: Install the French UM Language Pack on the Servers in the French office.
Box 2: Create a dial plan named ContosoFrance.
Box 3: Create a UM Hunt Group.
Box 4: Create a UM Auto Attendant named ContosoFranceAA.
Box 5: Assign the ContosoFrance Dial Plan to the users in the France office.
"
It was the same for me. I wrote this order and my UM score was 100%.

Anyway, there are many wrong answers in this dump. I have no new questions at all, but my score was 700. So I passed :-)

A few questions had different wording, and the answers' order was changed many times.

Thanks for the dump and for the comments!!!!

Mohamed

Monday, October 28, 2013 10:19 PM UT

Passed today 7xx
dump is vaild take care some answers are not vaild check the correction of the other members in the comment they've corrected some questions.good luck

emad

Monday, October 28, 2013 8:21 PM UT

I pass today with score 796 . this damp is valid .

Michael

Monday, October 28, 2013 1:39 PM UT

Hi Janay,
Can you share with us what answers you used ?

janay

Saturday, October 26, 2013 3:12 AM UT

passed today with 920, many incorrect answers.
i used this dump and passguide 115q dump.

Abdullah Al Garawi

Tuesday, October 22, 2013 2:27 PM UT

Passed today 743 dump not valid 100%

DR

Monday, October 21, 2013 8:08 PM UT

Passed the exam 7XX, tricky. Questions are valid.

Zeeman

Friday, October 18, 2013 1:01 PM UT

Passed yesterday. Dump valid but many incorrect answers

anonymous

Friday, October 18, 2013 8:55 AM UT

Passes today with 723. Some mew questions and lot of wrong answers. Dump not 100% valid anymore. But with technet and answers of the other guys and some knowledge, you can pass it.

someone

Thursday, October 17, 2013 7:41 AM UT

Passed the exam 7XX, tricky. Questions are valid.

Anonymous

Thursday, October 17, 2013 12:56 AM UT

Mixed Q48 - I think these are the different answers available (found in links below, but they float between 1 and 3). I think 3 due to reasons by answer.
http://www.mcseanswers.com/latest-mcse-70-342-real-exam-download-mixed-part-02.html
http://actualcram.examsquestions.com/70-342-training-cert-certification-practice-study/
1. Set-PublicFolderMailbox
Command didn't exist in my Exchange 2013 cmdlets)
2. Merge-PublicFolderMailbox.ps1
3. Split-PublicFolderMailbox.ps1
"Splits the given public folder mailbox based on the size of the folders" - http://justaucguy.wordpress.com/2012/10/18/exchange-server-2013-preview-scripts/)
4. New-PublicFolderMigrationRequest
5. Set-MailPublicFolder
Didn't see any ability to move/split - http://technet.microsoft.com/en-us/library/bb123707(v=exchg.150).aspx)

I agree with Some IT Chick from United States on:
New Q15 - DF She negates the client being Outlook 2007 forcing a directory sync.

I agree with satchmo/Australia & Anonymous/Unknown
Fabrikam Q6 - Uncheck Export (Save as) for Anyone (since it's to prevent users, the Anyone export seems more applicable)

New Q8's answer looked like a typo, I agree with it though (C only). The command should be Set-FederationTrust - http://technet.microsoft.com/en-us/library/aa997231(v=exchg.150).aspx

Prosware Q4 & Mixed Q10 - Claut/Italy seems certain (see his post 16 Oct)

Anonymous

Thursday, October 17, 2013 12:56 AM UT

Here are my thoughts/corrections based on everyonne's comments and my own checking after (or feeling comfortable with their links/reasoning).

I agree with Anonymous/Unknown 8 Aug, I don't really understand why to use Set-MailboxTransportService (checked options, read explanation and still don't see why):
New Q12 - CE (original AC) According to this link you need to implement a hub site (using Set-ADSite), in absence of that as an answer I think E is the best option - http://technet.microsoft.com/en-us/library/jj916681(v=exchg.150).aspx
Anyone agree/disagree?

Jeff/Bahrain's reference to Mixed Q16
Mixed Q16 - CE this is only due to other references on the Internet that excluded AD RMS Cluster as an answer, this seemed the consensus.
Can anyone help reinforce this?

I agree with Claut from Italy on:
Prosware Q9 - B http://technet.microsoft.com/en-us/library/jj674302(v=exchg.150).aspx
Mixed Q42 - ABCD http://technet.microsoft.com/en-us/library/dd297955%28v=exchg.150%29.aspx (URL from Mike, link reinforces Claut's conclusion)

Claut

Wednesday, October 16, 2013 7:57 AM UT

Passed Yesterday with 798

2-3 new question

I have changed some answer
Proseware Q9
B - Because I dont have to create custom mail tip, I have to enable Mail Tip for large audience, so I nedd to enable the tips and force generation

Set-MailboxServer MBX1 -GroupMetricsGenerationEnabled $true
Set-MailboxServer MBX1 -GroupMetricsGenerationTime 23:30

Now in Exchange 2013 I can create retention TAG also for Calendar, Tasks and Notes so I changed the answer MIXED QUESTION QUESTION 42 in
A, B, C, D
the support for Calendar and Notes was introduced by ex 2010 SP2 Rollup update 4

MIXED QUESTION QUESTION Exam F, Q48
In the exam the option New-PublicFolderMoveRequest was replaced by
something like split-PublicFolderProcedure.ps1
so I think the the correct answer was Set-MailPublicFolder because you can leverage on the auto splitting feature on modern public folders

Proseware Q 4
You can't create a UMAutoAttendant before create a dial plan, so I have changed the torder of the first two box
1. New-UMDialPlan -Name ProsewareUMDialPlan .
2. New UMAutoAttendant -Name ProsewareAA .

My score regarding UM was 100% so the solution proposed by me about Proseware Q 4 and by Gerry was correct for sure
Box 1: Install the French UM Language Pack on the Servers in the French office.
Box 2: Create a dial plan named ContosoFrance.
Box 3: Create a UM Hunt Group.
Box 4: Create a UM Auto Attendant named ContosoFranceAA.
Box 5: Assign the ContosoFrance Dial Plan to the users in the France office.

Some IT Chick

Saturday, October 12, 2013 1:13 AM UT

Passed with 742 today. About 5 new questions. Dump questions still valid. Verify answers in this dump.

anonymous

Friday, October 11, 2013 8:33 AM UT

failed with 682.
Dump seems to be still valid.
answers hardly mixed. Some new Answers in case studys

Some IT Chick

Thursday, October 10, 2013 8:06 PM UT

NewQuestion 15: Provide A. Datum Users Free/Busy of Contoso.

When you create an organization relationship with an external federated Exchange organization, users in the external organization can access your users' calendar free/busy information. No replication of GAL information is required. With this configuration in place, Outlook 2010 and Office Outlook Web App users can simply enter the SMTP address of an external recipient when scheduling meetings.
When creating an organization relationship, you can specify one of the following three levels of calendar availability access:
No free/busy access
Free/busy access with time only
Free/busy access with time, plus subject and location
For users in your organization to have access to external users' free/busy information or to allow for one-way sharing of their free/busy information with the external organization, the administrator in the external organization must also create an organization relationship with your organization. However, the external administrator can specify a different level of access for their users that's different from the level you specified. In a one-way sharing example, the external administrator would configure their organization relationship so that their users' free/busy information isn't shared with users in your organization, but the free/busy information for your users would be visible to the users in the external organization based on your organization relationship settings.
http://technet.microsoft.com/en-us/library/dd638083(v=exchg.150).aspx
Answer: Contoso - create Org Relationship; Datum, create Org Relationship

kouby

Thursday, October 10, 2013 1:57 PM UT

Passed today, all question from this dump 7xx

Lot of answer are wrong but the question are OK.

fier

Thursday, October 10, 2013 2:14 AM UT

failed today, only scored 662
All questions from this dump

Gerry

Saturday, October 05, 2013 2:20 PM UT

Passed with 746.

Majid Khan

Friday, October 04, 2013 8:58 AM UT

Passed today, 7xx.
Few changed questions, but some answers in dump are also wrong.

Gerry

Friday, October 04, 2013 1:48 AM UT

For the France or German Dial plan I'm thinking its suppose to be:
Box 1: Install the French UM Language Pack on the Servers in the French office.
Box 2: Create a dial plan named ContosoFrance.
Box 3: Create a UM Hunt Group.
Box 4: Create a UM Auto Attendant named ContosoFranceAA.
Box 5: Assign the ContosoFrance Dial Plan to the users in the France office.

Any thoughts?

Anonymous

Thursday, October 03, 2013 11:47 AM UT

Passed today with 7xx. All question from dump, but some wrong answers.

satchmo

Thursday, October 03, 2013 5:27 AM UT

Saleem from Unknown - Oct 03 2013, 2:30 AM
Comments are emotive and I would not trust these comments. It appears that people can pass this exam with this dump but some corrections are necessary

Saleem

Thursday, October 03, 2013 2:30 AM UT

Failed ,Please do not follow this dum,wrong answers of so many question,even you select right answer as per dump but still get fail,please do not trust on this dump,

Question

Tuesday, October 01, 2013 10:54 AM UT

When assigning a different language to a dialplan.

Is the first thing you need to do Create Dialplan or first download and install the language pack ?

Sy

Tuesday, October 01, 2013 6:59 AM UT

No new q.
8++