Microsoft.Pass4Sure.70-642.v2012-11-22.by.Bruce.349q.vce

Anonymous

Tuesday, May 20, 2014 10:14 AM UT

@ Rosa:

The answere is B. It's explained in the text you posted from Technet. By enabling express installation files network bandwith between your client and the WSUS will decrease, but the Internet bandwith will increase. When the question is about "bandwith utilization" it's about the internet bandwith.

Rosa

Thursday, May 08, 2014 7:19 PM UT

You have a WSUS server named server1. You need to minimize bandwidth utilization. what should you do:
a) Enable express installation on server1
b) Disable express installation on server1
c) Enable QOS on server1
d) Disable QOS on server1

Per the technet article, I'd say that the answer is A

from technet
http://technet.microsoft.com/en-us/library/cc720525%28v=ws.10%29.aspx

9. You should not choose to synchronize express installation files unless you have a pressing need to minimize downloads between the WSUS server and its clients. Typically, using express installation files reduces downloads from WSUS servers to clients by a factor of two but increases downloads from Microsoft Update (or an upstream server) to the WSUS server by a factor of four. You should decide which criteria are more important to your network: local network bandwidth or server disk space and Internet bandwidth.

ChrisLeblanc.org

Sunday, January 12, 2014 3:51 PM UT

I wanted to post a reply to the question below

•gubu from United Kingdom - Apr 09, 2013 Report Spam
Does anyone know what is the right answer for the new backup question?

Backup a file share server, you must be able to restore individual files.

Volume c, disk drive, system files
Volume d, vhd virtual drive, data files
Volume e, disk drive, data files
Volume f, vhd virtual drive, data files

choose two

a. custom backup volume d,e,f
b. custom backup volume c,e
c. custom backup volume c
e. custom backup volume d,f
f. full server backup
g. custom backup c,d,e,f

i'm looking for an answer post-test (820 score). i just like to know why. no answers found but i found what I think is an idea of the answer. My answer made the backups of physical and vhd seperate. I think i'm right. see the link and post

http://technet.microsoft.com/en-us/library/gg318053(v=ws.10).aspx

Detach any attached VHDs before you back up data. Windows does not support backing up a host volume (for example, C:) and the attached VHD (virtual volume D:) in the same backup set. If Example.vhd is attached and your backup includes the host volume C: and virtual volume D:, Windows will fail to create the snapshot because this is not supported. Instead, you should detach Example.vhd before backing up drive C:, and then Windows will successfully back up the host volume and any other data on the host volume (including the VHD). After backup of C: is complete, you can reattach the virtual volume D:. To restore the virtual volume D:, you need to restore the host volume C:, which includes the Example.vhd file in the backup.

Bob

Friday, September 20, 2013 6:45 PM UT

Very valid in Australia - passed with a 760, along with Mr Khan's only one or two new questions (WSUS - Express Install) and lots of port questions (DNS, DHCP, SQL, POP3), thanks Bruce !!

Chris

Sunday, September 01, 2013 4:30 AM UT

Hi Guys ! I passed today with 860 in Australia. 4/5 new questions. I remember that one of those was about running 2 task only to backup all volumes. 4 volumes were given, A: OS, B: user data, C: application, D: application. I barely remember them. Sorry for not being more helpful. Cheers !

kaka

Wednesday, July 31, 2013 6:22 PM UT

Dear All,

Passed today with Good Score 884 :) Just 2 Questions new and rest came from this dump.
thank's alot of bruce

Mary

Tuesday, July 30, 2013 10:00 AM UT

Hey guys, am planning to take this exam in two weeks time. i failed the first time and i hope with proper revision i will pass.just an inquiry, for those who have done the exam, how valid is this dump coz i dont wanna fail again.any help will be highly appreciated.

Bellgates

Monday, July 29, 2013 1:28 PM UT

Dear All,

Passed today with Good Score 800 :) Just 2 Questions new and rest came from this dump.

Thanks alot Bruce.

md. ebrahim

Sunday, July 28, 2013 8:50 AM UT

i think thak that this dump is so enough to pass. so my advice is, if you all solve this dump you must at least get 800* marks.

JM @ Phils

Thursday, July 25, 2013 4:33 AM UT

Very Still valid. Got 930 score. Just study since there also some new questions

z

Tuesday, July 23, 2013 9:29 PM UT

i passed today no enter this certif 681

Islam Farouk

Monday, July 22, 2013 4:08 PM UT

very valid passed today :) 836

Nyi Nyi Min

Saturday, July 20, 2013 11:11 AM UT

Valid, Passed with 838.
50 Questions, 120 minutes. Passing Score 700.

Irfan

Wednesday, July 17, 2013 7:52 AM UT

Thanks a lot. Passed today with 907.3 new questions.

Jazz

Wednesday, July 17, 2013 7:04 AM UT

@Saud Kader which dump did you use?

Saud Kader

Tuesday, July 16, 2013 1:17 PM UT

Dump Valid for South Africa passed 884 out of 1000. Exam had some newer questions though

stranger

Sunday, July 14, 2013 1:53 PM UT

Very much valid in London passed yesterday 13.07.13 some new questions

Hany Nasr

Saturday, July 13, 2013 7:31 PM UT

dump still valid , passed 13/7/2013 with score 930 best wishes for all

Gonzalo

Thursday, July 11, 2013 4:15 AM UT

consultation

When I do this test, in my Visual cet exam program, when I say the answer I get green, but underneath tells me that the correct answer is one, not the one in green, to which I have to do if you

Raheel

Wednesday, July 10, 2013 12:09 PM UT

i will passed in 838/1000 this dumps is valid thanks to ALLAH

Mohammed KSA

Wednesday, July 10, 2013 11:07 AM UT

PASSED today 815 score , on KSA, still valid,

Abdulguru

Tuesday, July 09, 2013 10:34 AM UT

the resources was quite usefull. keep up the good work and many thankx

Vallalraj

Sunday, July 07, 2013 11:32 AM UT

Passed Yesterday 907 Marks Thanks..

Devaughn

Friday, July 05, 2013 10:29 PM UT

I passed today with 766. Still valid

Roy

Wednesday, July 03, 2013 3:05 PM UT

Passed today with 815. Dumps valid.Thanks Bruce.

mohanbabu balasubramaniam

Monday, July 01, 2013 6:43 PM UT

I passed yesterday with 723, 4 new questions, 2 quest from networks, 1 from backup and 1 from nps. survey important .Some answers in these dump wrong . double check answers before exams. but u can pass with this dump.!!!valid in india. !!!

Naresh K

Monday, July 01, 2013 6:24 AM UT

Hi Everyone, just passed today with 746. Only 5/6 new question so the dump is fairly valid in India. !!!. Good luck and study from the book too.

jerry

Saturday, June 29, 2013 1:10 PM UT

MCITP AT LAST

jim

Saturday, June 29, 2013 2:27 AM UT

good stuff bruce, still valid in aus

ones

Friday, June 28, 2013 7:56 AM UT

finished my last exam yesterday, but my transcript profile doesn't reflect both titles of mcsa and mcitp:SA

Neil

Wednesday, June 26, 2013 11:49 PM UT

100% Valid for use when taking the 70-648 exam. I catagorised the questions in this paper to help me do the 70-648 by choosing the sections that are relevant, .worked a treat!!!!!

Pandu999

Wednesday, June 26, 2013 4:53 PM UT

dump is valid.4 new questions.

Rahamat Ullah

Wednesday, June 26, 2013 9:01 AM UT

i have passed the exam network infrastructure my score is 884 only 5 or 6 question new

nima

Wednesday, June 26, 2013 8:56 AM UT

still valid today i have passed with a score of 884. three or four questions are new

Thant Zin

Tuesday, June 25, 2013 3:46 PM UT

Still valid in Myanmar.passed today

Mic

Tuesday, June 25, 2013 2:24 PM UT

Dump is valid. Passed today with 749. 4 new questions.

Ahmad

Tuesday, June 25, 2013 12:58 PM UT

Hi, I am confused, in this dump some questions have two answers for e.g. Exam F, Q19, Answer A then Correct Answer B, so which one should I pick or remember, in this case correct answer is A or B. Please help, I failed exam 2 times already.

samir

Tuesday, June 25, 2013 4:59 AM UT

passed yesterday with 769

DD

Tuesday, June 25, 2013 12:03 AM UT

Q24 from Section B:

Your network contains an Active Directory domain. The domain contains a file server named Server1 that runs Windows Server 2008 R2.

You need to ensure that a user named User1 can back up and restore files on Server1. The solution must minimize the number of user rights assigned to User1.

What should you do?

A. Add User1 to the Server Operators group.
B. Assign the Backup files and directories user right to User1.
C. Add User1 to the Backup Operators group.
D. Assign the Perform volume maintenance tasks user right to User1.

The dump says that the right answer is B. We cannot restore backups with this permissions?!!
I would say that the correct answer is C.

Any comments?

mahmoud

Monday, June 24, 2013 5:12 PM UT

passed today but there are some wrong question in this dump so be attention
generally still valid in egypt

Maj

Monday, June 24, 2013 12:34 PM UT

dumps valid, practiced all the exam questions on this dump and encountered 4 new questions..scored 815 :D

from the UK (Stratford, London) to be exact

mabhiza

Monday, June 24, 2013 9:09 AM UT

Still valid in South Africa, wrote today, passed 838.

toyoshi

Sunday, June 23, 2013 3:26 PM UT

This dump is still valid in Malaysia. I passed today 815.

4-5 New questions. Thank you.

suman

Saturday, June 22, 2013 9:04 AM UT

very fine

chmod07@yahoo.com

Friday, June 21, 2013 8:20 AM UT

Exam A all the way to H only 10% came out on exam question paper. Crap I have retake the exam again.

Saad Mohamed

Thursday, June 20, 2013 6:03 PM UT

Dump still valid . passed today with 861 . one new question only .

BILLY

Thursday, June 20, 2013 2:44 PM UT

Passed today with 759, i learned this dump to 100% then i'm confuse with this result. A lots of new question (~ 5 new). Some wrong answers here. I don't understand why a lot of questions are wrong in this dump? I got the same questions but the answers are not good. Good luck and you have to look for every questions on google to verify.

Zen

Wednesday, June 19, 2013 7:55 PM UT

passed today wif 790, still valid in sa, thanx yoll

Nada

Wednesday, June 19, 2013 4:25 PM UT

@Zen

In response to Exam C Q10, I would say that answer "A" Interfaces from Dns Manager is correct. The interfaces tab gives you the option to specify which interface DNS will operate on. For example if you had a server with multiple NIC's connected to different subnets you could use the interfaces tab to specify which NIC (subnet) DNS will operate on.

Nada

Wednesday, June 19, 2013 4:13 PM UT

Hi Guys and Gals,

Just passed with a 9xx in LATAM and the majority of questions were from this dump "Microsoft.Pass4Sure.70-642.v2012-11-22.by.Bruce.349q.vce" I had about 4 new questions. One of which had to do with Network Monitor and running an extended monitor on a server resulting in high processor and memory utilization. The only viable answer option was to disable Conversations.

The other question was to do with having a scheduled backup job that conflicted with a process and needing to reschedule the job to start at 5:15 instead of 5:00. Answer options included AT, Task Scheduler, Backup console and a few more. This question required two answers.

I also got two subnetting questions one of which was a bit time consuming where you were given two IP address ranges for Montreal and Seattle and you needed to create a new IP for a new site Denver that would not conflict with the other two sites. The answer options were in CIDR form between /16 to /20. Did not have a point n shoot questions.

Best of luck and a huge thanks to Bruce and all that contributed to making this work.

Metralla

Wednesday, June 19, 2013 4:11 PM UT

The dump is valid. Passed today with 754 in Spain; but 7 new questions. Several multiple answer questions.

Zen

Tuesday, June 18, 2013 12:02 AM UT

Exam C Q 10
your network contains a dns server named dns 1 that runs windows server 2008 R2. You need to ensure that Dns 1 only responds to Dns Queires from computers located in the same subnet, what should you configure?

Is it Option A Interfaces from Dns Manager
Or
D Windows Firewall
Plz help?

anne

Sunday, June 16, 2013 7:26 PM UT

Hi guys, not sure which is one is the true and valid answer. Is it the once marked in "Answer:" or "Correct answer(s):"?

Mr.

Sunday, June 16, 2013 7:20 PM UT

I passed 861 on Jun 13. 5-6 new questions.Valid 80-85% in Israel. Thanks Bruce!

Moazzam hossain

Sunday, June 16, 2013 9:31 AM UT

This dumps is valid. 4or 5 new question.

ronie

Sunday, June 16, 2013 5:35 AM UT

passed with 910

dump is very valid
thanks dedulas

ahmed

Sunday, June 16, 2013 4:33 AM UT

Passed with 792 .Dump is valid

Peter

Thursday, June 13, 2013 6:49 PM UT

Wrote the exam today passed 746, dump is still valid, 4 new questions

ali

Thursday, June 13, 2013 9:41 AM UT

passed today with 769
no ports related questions,
valid but 4 new questions

Imran

Wednesday, June 12, 2013 3:00 AM UT

Got 907 valid dump, few new questions.

Best of Luck everyone

Anderson

Tuesday, June 11, 2013 6:50 PM UT

Valid in Brazil. I've passed yesterday with 800 points.

vaibhav

Tuesday, June 11, 2013 12:19 PM UT

passed today. valid dump . but almost 7-8 new questions and some modifications . thanks Bruce

Syed Junaid Ali

Tuesday, June 11, 2013 8:05 AM UT

Alhamdulillah, I Passed today with 723. this is a valid dump but i confuse with 6 question beacuse of answer moved around. and around 3 or 4 question new about subnating. but the main thing is i passed.

mabhiza

Sunday, June 09, 2013 3:55 PM UT

@Martin. Pls give me your email address. Im writing my exam on the 12 June 2013 in South Africa.

Aaron Yeboah

Friday, June 07, 2013 6:39 PM UT

@Bruce thanks for the good work you have done just passed 96% come from the dumps i passed with 9xx

Martin Sefiri

Friday, June 07, 2013 4:32 PM UT

Martin Sefiri. from South Africa, I passed today with this scores: 700, Many thanks Bruce and thanx a million God to give me the mercy to passed exam. Im moveinto last two part of MCITP. Amen

ibrahim

Thursday, June 06, 2013 4:13 PM UT

I passed Windows Exam 70-642 Windows Server 2008 Network Infrastructure, Configuring. My score 815 6 new questions

born2win

Wednesday, June 05, 2013 12:21 PM UT

Phew!! Finally 2 months of continuous hard work pays off :) I passed it today with 884.
This exam was really difficult lots of new question. I would recommend that instead of memorizing the dump know your stuff otherwise it is very difficult to pass the exam.
Moving towards my last part of mcitp sa i.e. 70-646.

Best of luck

mohamed ali

Monday, June 03, 2013 9:19 PM UT

pass today with 884 . there is another bruce dump it contains more valid questions and correction of 3 wrong answers from this dump . you better study other dump . and just study the droplets from this dump . for those who already study this you must study exam d from and review other bruce dump . good luck every one

Ahmed Saeed

Monday, June 03, 2013 1:01 PM UT

pass today 815..4 New Questions

Umair ahmed

Friday, May 31, 2013 10:45 AM UT

passed, score 884

Mohamed Adel

Friday, May 31, 2013 1:29 AM UT

this dump is valid passed today with 846

ahmed

Thursday, May 30, 2013 11:57 AM UT

this dump is valid passed yesterday with 838

Abdul Samad

Wednesday, May 29, 2013 10:16 AM UT

Dump Valid .Passed Today with 907 Marks. 4 New Questions

Iyad

Tuesday, May 28, 2013 9:45 AM UT

its valid, I had a few new questions, going for 70-640 day after tomorrow :) all the best people

Bruno Fernandes

Tuesday, May 28, 2013 7:52 AM UT

Hey Bruce i see you have release a new .vce but i dont see in this one any reference yours about that can i trust i the other.VCE?

Eng Mady

Monday, May 27, 2013 5:15 PM UT

failed today , with 681 , all questions from dump , it seam many answers worng , be careful from answers

great

Monday, May 27, 2013 9:32 AM UT

Dump valid .pass today

maxi

Monday, May 27, 2013 3:48 AM UT

For great
yes dump is valid.
I passed with 923 two weeks back

Al-shennawy

Sunday, May 26, 2013 5:35 PM UT

i passed today 815

this dump is valid in egypt
about 10 new questions but if you studided well you will answer them

good luck

muhammad irshad

Sunday, May 26, 2013 7:33 AM UT

Ans: C.Configure DHCP link layer-based filtering.

maxi

Saturday, May 25, 2013 6:57 AM UT

Your network contains a server named DC1 that has the DHCP Server server role installed.
DC1 has a DHCP scope for the 10.10.10.0/24 network ID.
You discover the following warning message in the Event Iog on DC1: "Scope, Scope1, is 98 percent full with only two IP addresses remaining."
You need to ensure that DC1 has enough IP addresses to assign to clients. The solution must not cause any IP conflicts.
What should you do?
A.
Restore the database from a backup.
B.
Configure name protection.
C.
Configure DHCP link layer-based filtering.
D.
Increase the database cleanup Interval.
E.
Configure a DHCP Relay Agent.
F.
Compact the database.
G.
Modify the start address.
H.
Reconcile the scope.

It says 98% used and only remain 2 address which is wrong error code.
for the mask it suppose to have 254 IPs if 98% then the balance suold be 4 -5 IPs
then correct answer should be
H Reconcile the scope.

http://technet.microsoft.com/en-us/library/dd183579(v=ws.10).aspx

shane

Friday, May 24, 2013 11:15 PM UT

from united states. the dump is still valid passed today with a score 810. most of the questions were on there. i think the survey we take before the test effects what kind of questions we get during the test.

Sthembiso Paul

Thursday, May 23, 2013 5:37 PM UT

Passed with 700 still valid in South Africa.Thanx Ng'yabonga mina

Dinh Ngoc Hien

Thursday, May 23, 2013 10:31 AM UT

Dump still valid, I passed today with 861
3-4 new question and some wrong question (i'm not sure)
i just remember a question about LDAP port
Thank you so much, Bruce!

Dragonfly

Thursday, May 23, 2013 10:24 AM UT

Dump is valid but i got 8 to 10 new questions!
Passed with 838,be sure to understand the questions!!

Thx!! Bruce

Lynn

Thursday, May 23, 2013 4:08 AM UT

Vaild dump. Passed today with 838 marks.Many Thanks to Bruce and Rafaqat.

Zin

Thursday, May 23, 2013 4:06 AM UT

Thanks indeed Bruce and Rafaqat.I Passed Today with 838.Contained 3 new questions. I studied this dump and Rafaquat also. :) :)

Bruno Fernandes

Wednesday, May 22, 2013 7:47 AM UT

passed yesterday with 700 but was like 10/12 new questions need to be update quickly to help us :D Portugal

goodluck

Tuesday, May 21, 2013 6:32 PM UT

Hi Guys,

How much importance Ip addressing has with this particular exam??

suzen

Tuesday, May 21, 2013 1:35 PM UT

Dump is still valid. Passed with 861.

Mr NLD

Tuesday, May 21, 2013 8:05 AM UT

Dump valid enough to pass. Got 77% couple of new questions

Mina Fayek

Monday, May 20, 2013 4:40 PM UT

This Dump is Still Valid .
Passed with 815
all questions from the dump . just 1 new question about LDAP firewall port number
Thanx Bruce :)
Thanx God

Langoler

Sunday, May 19, 2013 12:44 PM UT

I tnink exam I Q13 is wrong

1 Run Dnscmd and specify config parameters
2 Create a GlobalNames Zone
3 Create a CName record

adam

Saturday, May 18, 2013 7:51 AM UT

Passed today with 700/1000 10 new questions.

Thank you Bruce :)

bill

Friday, May 17, 2013 6:13 PM UT

Passed today.almost all from this dump.had 3 new questions.
Check answers because I scored a 792 and was getting high 900's on dumps.

THANK YOU BRUCE!!!!!!

Peca

Friday, May 17, 2013 4:03 PM UT

@diego Don't thank god, thank Bruce and your hard work.

goerge

Friday, May 17, 2013 3:55 PM UT

passed cert today dumb is valid got 4 new questions .still u can manage to pass

diego

Friday, May 17, 2013 3:06 PM UT

Passed today 861. 5 new questions THANKS GOD BLESS YOU

Pmp

Friday, May 17, 2013 1:44 PM UT

Passed today with 884. 4-5 new questions, mostly about DNS. 3-4 questions about ports. There was that question that someone already mentioned about number of encrypted bytes, but you couldn't choose Quick Mode, only submenus. I chose "security associations".