Microsoft.Braindump.70-640.v2012-07-09.by.Andyfx.402q.vce

Nerd_Fantasy

Friday, September 21, 2012 1:56 AM UT

Valid in the states. Took it yesterday and passed. About 3 questions were not in the dump.

Gideon

Wednesday, September 19, 2012 12:42 PM UT

Bull man i just wrote none of the questions were in da exam probably 3 or 2

Bill

Monday, September 17, 2012 6:58 PM UT

Passed my 70-649 on Friday by studying:

Microsoft.Braindump.70-640.v2012-07-09.by.Andyfx.402q
Microsoft.ExamCollection.70-643.v2012-05-05.by.Chipper.294q
Microsoft.certkey.70-642.v2012-07-03.by.Roano.290q

Each exam section had many new questions, so make sure you understand the questions and the answers. Also, some of the answers in the practice exams weren't correct, so do your research when you're not sure. Good luck everyone!

Malenko

Saturday, August 25, 2012 2:02 PM UT

used this to pass yesterday , 780+ score. 25 of my 50 questions were on this dump. If you study the questions and not just memorize the answers, you will pass with this.

potato

Thursday, August 23, 2012 8:57 AM UT

Passed today at 700. Partially valid.

Yuri

Thursday, August 16, 2012 4:02 PM UT

Passed exam with 700 an hour ago Prometric, dumb is still valid 60-65%

binary369

Monday, August 13, 2012 3:44 PM UT

pass today at 850. Dump still valid but about 10+ new questions.

SlayerX-767

Monday, August 13, 2012 2:50 AM UT

Tossaphorn: Thanks for the link! Taking the Test this Friday, Been studying Andyfx, Newton & Maxbox. I'll report back ASAP on my results. Wish me luck!

Mukoma

Wednesday, August 08, 2012 1:26 PM UT

Not valid is South Africa. Failed miserably.

Tossaphorn

Wednesday, August 08, 2012 3:39 AM UT

Pass today 752

More question from

http://maxbox.maxlc.com/Exams/70-640/70-640%20New%20With%20Answer.pdf

and New question about 5 choice

Thank you MMMH , AndyFix , Newton

smurf

Monday, August 06, 2012 12:39 PM UT

passed Friday 717 studied MMFSH and Andyfx 402 looked over this dump as well. dumps are about 30% some questions are altered and some answer choices are changed. not an easy Test

Mostafa

Tuesday, July 31, 2012 2:18 PM UT

I faild today with 600. this dump not more 7 Q from it :-(.

moshik

Tuesday, July 31, 2012 9:23 AM UT

all dump is here is not good i fail today/is not feer!!!!

don

Monday, July 30, 2012 2:52 PM UT

@shay, those maxbox are already outdated also. there were new question after this pdf released.

shay

Monday, July 30, 2012 9:39 AM UT

http://maxbox.maxlc.com/Exams/70-640/70-640%20New%20With%20Answer.pdf

pls . look over tat
MAXBOX new question PDF file

Jeriko

Monday, July 30, 2012 6:50 AM UT

I passed last Friday with 80%, as mentioned multiple times there were about 15 new questions and some questions from this dump have changed. If you've read the official book, used the dump for preparation and read the questions carefully so you can definitely pass the exam.

xenophobic

Monday, July 30, 2012 2:46 AM UT

scored 678/1000
A lot of new questions.. hope that the dump get updated soon

PeachPie

Sunday, July 29, 2012 8:17 PM UT

I used this dump as reference, I got maybe 8 questions off this dump. You have to study. If you know the content, you will pass. Don't depend on just this dump. Passed with an 850. A cert is useless if you get hired and don't know what you're doing.

Pranav Vijay Thakar

Sunday, July 29, 2012 8:50 AM UT

Failed today..360/1000.
Lot of new questions..

ssniyer

Saturday, July 28, 2012 4:59 PM UT

@Shadowner - My take on the adatum question is as follows - Windows Server 2008 R2 RODC can be supported at Forest and Domain functional level of 2003 and this is something given in the question. This rules out B and D. Both A and C are valid answers and therefore the emphasis is on - What needs to be done FIRST? We don't know if the domain already contains a writable Windows Server 2008 R2 DC as the question is silent on the point. If 2008 R2 DC is already present, we will still need to run adprep /rodcprep. If 2008 R2 DC is not present, we still need to run adprep /forestprep and /domainprep in order to install the first writable Windows 2008 R2 DC. In either case adprep needs to be run FIRST.

Hope this helps. Thanks for sharing the question.

Smurf

Saturday, July 28, 2012 9:48 AM UT

ya raise the forest first

Harvey

Friday, July 27, 2012 10:22 PM UT

I failed the exam with 668 just looking this questions! A lot of new question, I think that this VCE has too much old question.

Harvey

Friday, July 27, 2012 2:37 PM UT

Following Shadowner Commentary:

I think that the correct answer is C. Adprep. because when you need to raise the forest functional level you need to raise the domain functional level first, if not, you receive a warning from the GUI when you try to upgrade the forest level and have the domain in a lower level.

AraPunk

Friday, July 27, 2012 11:40 AM UT

Passed.

Dump is still valid
- 5 totally new questions
- 10 kind of the same as in the dump, but with more different answers.

Good luck everybody!

Shadowner

Friday, July 27, 2012 7:50 AM UT

Your Network contains an AD forest named adatum.com. All DC's currently run Windows Server 2003 SP2. The functional level of the forest and the domain is WS 2003.

You need to deploy a read-only domain controller that runs Windows Server 2008 R2.

What should you do FIRST?

A)Deploy a writable domain controller that runs Windows Server 2008 R2
B) Raise the functional level of the forest to Windows Server 2008
C) Run adprep.exe
D) Raise the functional level of the domain to Windows Server 2003.

Some tests say Answer A, some say Answer C.
But I think it could be answer D, as the question states what needs to be done first. Not what you need to do NEXT when the level is already 2003.
Second should be adprep.

MCTS Self Paced Training Kit 70-648-70-649, Chapter 5: Configuring AD LDS and Read Only Domain, Deploying an RODC.

Quote:
"The High-level steps to install an RODC are as follows:
1. Ensure that the forest functional level is Windows Server 2003 or higher.
2. If the forest has any domain controllers running Microsoft Windows Server 2003, run adprep /rodcprep
3. Ensure that at least one writeable domain controller is running Windows Server 2008.
4. Install the RODC."

Shadowner

Friday, July 27, 2012 7:40 AM UT

I found out that some questions are incorrect:

To mention a few:

"Your network contains two servers named Server 1 and Server 2 that run Windows server 2008 R2. Server 1 has ADFS Federation role service installed.
You Plan to deploy AD FS 2.0 on Server 2.

You need to export the token-signing certificate from Server 1 and then import the certificate to server2.

Which format should you use to export the certificate ?

A) Base-64 encoded X.509 (cer)
B) Cryptographic Message Syntax Standard KPCS #7 (.p7b)
C) DER Encoded binary X.509 (.cer)
D) Personal Information Exchange PKCS #12 (.pfx)

The Test says it is Answer D but I found out it is Answer C.

See quote from the MCTS Self Paced Training Kit 70-648-70-649, Chapter 6 AD FS and AD RMS, Importing and Exporting.

"To do all these tasks, create the file share you will use to store the certificates. Ensure that you use DER Encoded Binary X.509 (cer) format when you export the certificates."
"

Max

Thursday, July 26, 2012 7:39 PM UT

I just passed the exam ..score 790.. new questions. around 15 new.

blubber

Thursday, July 26, 2012 10:10 AM UT

Valid in Switzerland
~10 total new questions
~3-4 similar questions (little changes like count of servers or names)
~1 drag&drop question with a new answer order (the one with the 3 business_apps)

Read a little bit in the official book and used this dump. Got 84%.

pebo

Tuesday, July 24, 2012 6:10 PM UT

Passed today in the UK with 778. There were about 25 questions that are not in this dump so make sure you are familiar with the theory and use the dump only as a revision aid - I also read the official MS press book.

MrBookWorm

Tuesday, July 24, 2012 4:27 PM UT

passed today with 770.

Mon

Tuesday, July 24, 2012 2:30 PM UT

MAXBOX , maxbox..why o why.did you desert us ?.. :(

Skexit

Tuesday, July 24, 2012 9:29 AM UT

Passed yesterday with 898 Points. Learned this dumb.

Guess i had luck that they made a mistake and booked my test in german (wanted to do it in english) language because for the GERMAN questions this was still 100% valid.

obeid

Tuesday, July 24, 2012 8:50 AM UT

is this dump still valid in united arab emirates?
@silentfire. im still waiting for your post. thank you in advance

MrBookWorm

Monday, July 23, 2012 8:10 PM UT

Hi All,

I have this exam tomorrow and have spent about 35-40 hours reading the MS book and then another 10 hours reviewing this dump. Hopefully even with the MS exam changes it will see me through.

I will let you know how it goes tomorrow afternoon..

SilentFire

Monday, July 23, 2012 7:31 PM UT

@MrContoso Yes i can do that. i'll post some tonight.

MrContoso

Monday, July 23, 2012 5:14 PM UT

Congrats to you SilentFire!..

would appreciate if you can share some new questions you can remember.

SilentFire

Monday, July 23, 2012 5:01 PM UT

Passed today with a 717. This dump is definitely valid for about 70%. M$ is still using the same questions from this dump for about 70% percent of the material.

With being said, guys if your serious about passing this exam, please don't just rely on the dumps, pickup the book and read it and do the labs. You will learn a heck lot more and have a better idea going into the test knowing the material.

The rest of the 30% was def all knowledge testing from M$. They put in new scenarios where you have to either arrange the right order of doing things or either picking the right selection.

I wish you all good luck!

ahmed

Monday, July 23, 2012 10:26 AM UT

hello guys im going tomorrow to exam i want dumb is Valid in egypt Plase
I study mmfsh + maxbox

vime-admin

Monday, July 23, 2012 9:29 AM UT

Hi All, pls share your thoughts if this dump is still valid. Although I studied CBT Nuggets, Dumps are still helpful. Hopefully I pass, my exam is on July 26, thurs!

Thanks and God bless everyone

Heba

Sunday, July 22, 2012 10:24 PM UT

@MrContoso: my answer was no. 3
for the same reason NWTraders mentioned but i'm not sure as there's no clear reference!!

NWTraders

Sunday, July 22, 2012 8:04 PM UT

had to proxy to get past comment limit lol

NWTraders

Sunday, July 22, 2012 8:04 PM UT

b0rn2fl1 - copy and paste it.

SilentFire

Sunday, July 22, 2012 7:58 PM UT

@NWTraders : i have skype, what's ur id? i will add u

NWTraders

Sunday, July 22, 2012 7:55 PM UT

SilentFire, do you have Skype or MSN, maybe we could have a quick chat about the exam, and topics etc?

SilentFire

Sunday, July 22, 2012 7:49 PM UT

@chaki : will do

chaki

Sunday, July 22, 2012 6:50 PM UT

@ SilentFire & NWTraders: I will appreciate your feedback after exam tomorrow, mine on thursday. good luck

NWTraders

Sunday, July 22, 2012 5:48 PM UT

Best of luck to you to SilentFire.

SilentFire

Sunday, July 22, 2012 5:47 PM UT

My exam is tomorrow too and right now i am trying to just focus on my week point.

@NWTraders: from what i have been reading on the comments there seems to able to questions on DNS. Know that well. Also when ur taking this exam for practice, try to focus on your week points and go back and quickly review those topics again.

Unfortunately, the exam contact of this exam is an inch think but a mile long. Best of luck dude!

NWTraders

Sunday, July 22, 2012 5:02 PM UT

Well, my exam is tomorrow and now the dump changes.. typical.always happens.. any advice on what to really focus on ? Any tips on what came up would be much appreciated

MYOHMY

Sunday, July 22, 2012 4:58 PM UT

Writing my exam soon wondering if I know this exam 100% and I understand alot of the concepts should I be able to pass ..how many new questions is everyone seeing on the exam 10-15 ? ..Nervous ..any advice ?

MrContoso

Sunday, July 22, 2012 4:17 PM UT

My answer is 3 also. Same reason with nwtraders. But i have no clear reference. Ms exam is tricky at times .

Thailand

Sunday, July 22, 2012 3:46 PM UT

I read full dumb . I hope , I will be pass exam on next month

NWTraders

Sunday, July 22, 2012 3:05 PM UT

No, the answer is 3. There is a forest with two domains - therefore if all DC's need to resolve, you need to replicate the Stub Zone throughout the Forest and not just the one domain.

lolcat

Sunday, July 22, 2012 3:03 PM UT

That question is rofl easy - its obviously option 4.

MrContoso

Sunday, July 22, 2012 2:16 PM UT

Thanks Heba. Appreciate your sharing. I hope others share too. Especially MAXBOX :)

Btw, whats ur answer?

Heba

Sunday, July 22, 2012 1:04 PM UT

one of the new questions about the DNS that
there's forest with two domains and a member server that host a primary zone and you need to make sure that all domain controllers can resolve the domain for this zone
the choices were :

1)configure a secondary zone on one domain controller
2) configure a secondary zone on the member server
3) configure stub zone on one domain controller and make replication scope to the forest
4)configure stub zone on one domain controller and make replication scope to the domain

that what i remember about this question not like the exact one but almost the same idea
Good luck all

Heba

Sunday, July 22, 2012 12:51 PM UT

passed with 876 but the dump is about 60% valid
new questions , same questions in this dump but with new answers , a lot of DNS new ones !!
overall it's not easy, it takes time and hard thinking to pass it

Rafik

Saturday, July 21, 2012 9:26 PM UT

Thanks God , I passed today , score 825 . Don't rely on dumps only . more than 30% new questions

wj666666

Saturday, July 21, 2012 6:40 PM UT

80% accurate, passed in canada 7-21-2012

Traxion

Saturday, July 21, 2012 6:08 PM UT

Exactly as Joasssaid it's tough. I crammed my ass off yesterday and just managed to pass. Don't rely on the dump alone.

jon

Saturday, July 21, 2012 5:34 PM UT

NOT VALID! know your stuff and you will pass. I did, barely! I used this as a study guide and did not rely on it as a means of the actual answers. there were about 45 questions on my test not seen in any file. there were also many exhibits and stuff. bottom line know you crap and you'll pass, dont know your crap you'll FAIL. it is an extremly hard test, so before you waste money preparre yourself and dont get a paper cert. they are worthless anyway

Jiri

Saturday, July 21, 2012 4:49 PM UT

Passed in UK 20/07/2012 with score 752/1000. Learned only from this dump, although not valid, there was 10-15 new questions and some exhibits. It was really tuff. Learn the materials well and do not skip anything! M$ always tests you from their latest technologies. In this case there was a lots of DNS & RODC. Thanks for this dump anyway!

james

Saturday, July 21, 2012 1:58 PM UT

This dump is not vaild in india,15-20 new ques also the question came ftom this dump has been modified in exam its tough now score only 553 only..please upload the latest dumps..thanks!!!!

dinesh

Saturday, July 21, 2012 11:57 AM UT

passed today .exactly got 700.GOD is great.thnks andy.got 11-14 new qsns.be careful guys.

Faysal

Saturday, July 21, 2012 9:30 AM UT

@Arsalan_PAK congratulations, and thanks for the advise ,
ramadaan Kariiim @Arsalan_PAK Good Luck
i guess i'll have to wait after 2 week

, Please let us know how you did and if this dump is still valid.

lolcat

Saturday, July 21, 2012 9:16 AM UT

DON - I have it on Monday too, and I wish the same.. typical the questions change the day before my examination.,..

don

Saturday, July 21, 2012 9:04 AM UT

Due my exam on Monday. My only wish in this world right now is MADBOX appears here and upload the latest q.. :(

kamote

Saturday, July 21, 2012 4:34 AM UT

Mr. Andyfx.i would like to take the examination 1 wik from now..what is the valid dump in Saudi Arabia..Pls. help.many thanks in advance..

Vinh Lê quang

Saturday, July 21, 2012 3:30 AM UT

pass today ! have some new question in my exam !
But thank you so much Andy !

Fabrito

Friday, July 20, 2012 9:44 PM UT

Passed today with 770. This dump is 60% valid. There are questions from this dump but they are changed. Thank you Andyfx ! 70-642 for me now ! BRAZIL !!

Johan Miedema

Friday, July 20, 2012 3:01 PM UT

Passed today, as mentioned earlier there are new questions en there are questions from this dump but they are changed, read carefully and choose wisely. Good luck everyone, i'm on to the next exam 70-642

Preston_PAK

Friday, July 20, 2012 2:10 PM UT

One Hot Shot question was like: You have two-way trust with selective resource setting between two Forests.

you have a Server1 in Forest1, you gave share permission of a shared Printer and Document folder to a User of Forest2. But access to the printer denied.

You have to give permission. then the exibit of the permission/Security to Server1 was given:

The Security Dialog was show with the following Permissions:

1. Add Printer
2. Delete Printer
3. Authentication
etc. but Hint is permission list was started from Add Printer. Check it some where in the Trust or Server Permissions. I Skipped this question with selecting Add Printer option as a Guess :0

MrContoso

Friday, July 20, 2012 1:53 PM UT

Thanks a lot Preston_PAK! Appreciate much your generosity. Hope others who finished can contribute as well.

Przemek

Friday, July 20, 2012 1:07 PM UT

Passed exam today with 850! There was a lots of new questions

otto@otto.com

Friday, July 20, 2012 12:46 PM UT

@ Preston_PAK
question about mounting AD DS. answer is ports. wrong value, any port number over 40 000. page 690 of MS-PRESS 70-640 training kit.
ldapport (40 000 or higher)
1. change DBPort

Preston_PAK

Friday, July 20, 2012 12:14 PM UT

This was a new question i remember very well.

It was about dsmain question. To view information from an AD Snap-in already mount. it was mostly for LDP question but here it was about AD DS mounting. I was very confuse to read it again and again :)

a very common command of like common question of dsmain. with answer of change dbport and dbpath parameters: but it shows a command prompt Exibit in which they execute this command. I guess nothing wrong with the command and an error show after running this command.

Hint reminds about command.
1. port was like 34883 (so no problem with port)
2. path was of (c:/windows/ntds/ntds.dit)

ERROR: access denied to the file and it may cause due to resource already in use.

I got it because the Snapin was mounted after taking backup in the question.

Answer Option what I remember:
1. change DBPort
2. Change DBPath
3. Stop AD Service
4 ( i can't remember)

I answered (STOP AD Service) because It was the only thing what could cause the problem of accessing resources which was already in use.

Preston_PAK

Friday, July 20, 2012 12:01 PM UT

Five Question of MaxBox I remember:

1. Answer: PDC Emulator
2. Answer: RID Master
( Must all other of FSMO role may be get sheffle for you)
3. Certificate Template (I can't remember well but it was EFS question)
4. NTDSUTIL and DSBUILT for backup

Preston_PAK

Friday, July 20, 2012 11:56 AM UT

Question of Event Viewer and Basic Task Wizard came from Maintaining AD Environment Exam Section of Newtons and MMFSH Dumps.

Must prepare this question

Preston_PAK

Friday, July 20, 2012 11:53 AM UT

@Locale

One Question was of DNS, to ADMIN1 user give full rights of a DNS Zone contoso.com. he can change host records etc

Question was easy but all the answer options was very stupid. (Choose Two correct Answer) and these two answer repeats twice to make it four choices :)

A- go to property of Zone and do it from SOA tab and set Responsible to Admin1@contoso.com
B- Go to DNS folder and open contoso.dns file in Notepad and change all hostmaster@contoso.com with admin1@contoso.com in each instance.

one should be rigth but i don't know which one. there should be option of DNScMD or DNSLINT command but it was totally change :(

Now i checked on my server and SOA tab of DNS Zone and it is the right answer. There is Responsible Tab having value of hostmaster@contoso.com . You all must prepare that question

Preston_PAK

Friday, July 20, 2012 11:46 AM UT

I took Exam yesterday. So many new questions:

One Question was about GPO permission for a User when it logon on some specific computer then he get Local Admin rights on that computer only and when it log off the Local Admin Rights got back and When it get login on another computer then don't have the Local Admin. It was regarding GP setting of Computer Configuration for some specific Computer (Possibly for his own PC only). I choose answered something like: "Create a newGroup Policy and Link it to the Group from where user belong".

It could be right choice

lolcat

Friday, July 20, 2012 11:16 AM UT

@All those who have taken 70-640 recently. Im taking this test on Monday and am now very worried. Any chance you guys could be kind enough to jot down some general topics that came up, and even some questions you can remember?

Lionel

Friday, July 20, 2012 9:43 AM UT

Thank you Andy and Max, Managed to pass with 766 using the 70-640.v2012-07-09.by.Andyfx.402q.vce and microsoft book. Kindly rescheduled your exam for new dump if you are not confidence. (at least 15 new question)

Srikanth

Friday, July 20, 2012 8:36 AM UT

Passed today with 805. Got close to 10 new questions.
Thanks Andyfx

izik79

Friday, July 20, 2012 8:07 AM UT

Failed today. 5-6 questions from this damp.

Mike

Friday, July 20, 2012 5:48 AM UT

I took the exam and failed. Looks that the exams were changed already. so many questions were not on this dumps. About 30q were found only on this dump and the rest are new.

Arsalan_PAK

Thursday, July 19, 2012 5:01 PM UT

Thanks Yarob. Allah Bless you with Good Passing Score after Ramdan.

@ AndyFx: you didn't tell your Score of Exam. I am little curious about. I think you must hit 900 +

Arsalan_PAK

Thursday, July 19, 2012 4:59 PM UT

I remember 5 new questions just feel like MaxBox Question Format. I guess MaxBox 35 Q are the limited release. It should be about 60 to 70 questions atleast. May be MaxBox next release solve you people problems :)

Yarob

Thursday, July 19, 2012 2:58 PM UT

@Arsalan_PAK congratulations, and thanks for the advise , i guess i'll have to wait after Ramadan unless some one saves us with a valid dump.

MrContoso

Thursday, July 19, 2012 2:54 PM UT

My exam scheduled the coming week. MAXBOX, our saviour, please hear us.

Arsalan_PAK

Thursday, July 19, 2012 2:48 PM UT

@ AndyFx: Congrats dear AndyFx, just read your comments.

@ Tamaz: You are lucky that your take advantage of this Dump.

@ Yarob: Plz Plz Plz take your time to appear for the test. Study more and wait for some Valid dumps.

Arsalan_PAK

Thursday, July 19, 2012 2:36 PM UT

I passed with 856 This Dump is not Valid now. Don't try it for Exam point of view. i think 15 question almost came from this dump. You must study hard the material and books. Alot of new questions and Many mixed mode questions. I think 25 New questions and 10 almost mixed questions.

Best of luck you all guys

Yarob

Thursday, July 19, 2012 2:29 PM UT

@Andyfx . Thank you for your efforts so far. i have studied this dump but i've been reschedualing the exam for more than a week .do you advise to take it as planned this saturday, or do you suggest to wait for an updated dump.

tamaz

Thursday, July 19, 2012 2:27 PM UT

Hi @Andyfx. Congratulation for your exam. It is too bad that the specific list that I have given below is out of date in England in any case: your dump covered for me 94% of my exam!

may be it is still valid in France or elsewhere than England. Only a kind souls who pass their exams and will want well come here could testify and confirm.

See you in the 70-646 :)

Andyfx

Thursday, July 19, 2012 2:06 PM UT

@lolcat, there was a new point and shoot regarding permissions on a shared printed, new questions re AD FS, a few new questions with options A-J on various topics. Can't really say more than that unfortunately. I would say that about 26 questions came from this dump and that includes the maxbox questions. Study hard!

lolcat

Thursday, July 19, 2012 12:44 PM UT

@Andy any chance you could give us a few clues to what the new questions were on, whether they were tough, or similar to dump content in terms of theory.

mark

Thursday, July 19, 2012 12:04 PM UT

@handy

What are new question??

Andyfx

Thursday, July 19, 2012 11:40 AM UT

Passed today with no problems, this dump however is no longer 100% valid. There are many new questions which I did not recognise and I knew all 402 from this dump very well.

Also some of the existing questions have been modified with different descriptions and answers.

If you have studied this dump and information from other sources i.e. text books etc you should pass ok, but DO NOT rely just on this dump as it is now out of date (in the UK at least).

Signing off now, see you all in 70-646.

Good luck!

Pranav Thakar

Thursday, July 19, 2012 7:50 AM UT

Hello Guys,

I will be giving the exam very soon. Please suggest if the dumps are valid.

Thanks Alot guyz and all the best for all those who are apearing for the Exam.

Yarob

Thursday, July 19, 2012 7:38 AM UT

@Arsalan_PAK : Good Luck, Please let us know how you did and if this dump is still valid.

Arsalan_PAK

Thursday, July 19, 2012 6:01 AM UT

Thanks SHAWN: Exam-j is derived from MaxBox, and I had study it alot. It is really very much disturbing for me that Negative comments start coming my Exam Day :)

Well, I have only 4 Hours left for the Exam.

See you all after the exam. Pray for me please