Microsoft.BrainDump.70-246.v2012-07-25.by.AdinE.71q.vce

Elie

Monday, October 22, 2012 7:55 PM UT

Valid. I passed today with 866/1000.
No new Q but some answers in dumps are wrong.

HULK

Monday, October 15, 2012 6:30 PM UT

@Aimen No worries, in that case you will have to contact Microsoft direct and let them know you MCP ID and then tell them the problem you have, they should be able to sort it out from there end. :)

I hope this helps. take care :)

Aiman

Monday, October 15, 2012 4:48 PM UT

Thank you Hulk.

I already did that . And they confirm there in no issue from there side.

**HULK*

Monday, October 15, 2012 3:43 PM UT

@Aiman Khawaldeh (UAE) You will have to report this to the test center where you took the exam in. It is up to them to send the results to prometric.

It looks like they have not sent your results off to them. So best thing to go to them and let them know.

take care :)

Aiman Khawaldeh (UAE)

Sunday, October 14, 2012 10:08 AM UT

Dears

I have Passed since 5 days , but it still showing "Pending" in Prometric website.
Please advice if anybody have the same issue !!!

student

Monday, October 08, 2012 5:28 PM UT

Still O.K.,passed with 850 on Oct-8th.
Thank you all who participated for helping us to pass.

Alfil

Monday, October 08, 2012 4:37 PM UT

Still valid in Spain. Some questions wrong, but, valid

kita2010

Saturday, October 06, 2012 2:58 PM UT

Dump 90% valid . Passed OCT 05 with 916

AMWahab

Friday, October 05, 2012 10:42 PM UT

@MadDog

Exam C (Service Manager)

Q6&7
Answer in VCE is to Register the Orchestrator Integration Packs "correct Answer"
you can't do "Sync Folder" without "Integration Packs"

Exam F (Orchestrator)

Q3
Answer in VCE "Check Out Runbook - Start from Runbook Tester - Provide Input parameters - Check In Runbook" correct
http://blogs.technet.com/b/meamcs/archive/2012/03/14/system-center-orchestrator-2012-test-amp-start-runbooks.aspx
"Check In:After you finish your editing, you can Check In RunBook and so that all your changes will be committed. And also other users can then edit RunBook."

New One

Exam C (Service Manager)

Q13
Correct answer should be "Add the service offering and the request offering to a Service Manager group, and then create a User Role"
http://blog.concurrency.com/infrastructure/scsmportalpermisions/
"select the Service Offerings and Requests that you want the group to view. Then click add again. If you add only Service Offerings and no Request Offerings nothing will show up. You mus add the Request Offerings you wish to display"

Brian

Thursday, September 27, 2012 4:35 AM UT

Valid 100% , just pass today 27/09 with 850

Matths

Monday, September 24, 2012 7:58 AM UT

This dump is 100% valid - scored 900 using this dump with mad dog changes.
Some answers were wrong though!

John

Thursday, September 20, 2012 4:33 PM UT

80% Valid -PASSED Today (20/09/2012) 735..Used ***Microsoft.BrainDump.70-246.v2012-07-25.by.AdinE.71q.vce**** ONLY , With this file alone you should able to score enough to pass. Good Luck.

kunngoc

Wednesday, September 19, 2012 2:10 AM UT

Mình vừa pass ngày 18/09. Câu hỏi thì giống 100% trong bộ đề nhưng khả năng lời giải chưa chuẩn nên được 850 điểm.

SeriousSam

Saturday, September 15, 2012 11:36 PM UT

Passed 900 today, this dump with Maddog changes.

gds

Friday, September 14, 2012 9:53 AM UT

this dump is valid. passed yesterday I used only this dump.

jacques South Africa

Friday, September 07, 2012 11:31 AM UT

thank you michael..congrats on the pass. i am taking my test next week.

Michael

Friday, September 07, 2012 10:49 AM UT

@Jacques : Exam valid i pass today with 866/1000, same question few wrong answer.

jacques SOuth africa

Friday, September 07, 2012 9:50 AM UT

thanks for the info...i am in the process of setting up my exam so just wanted to confirm before taking it

congrats on the pass

MCSE-Again

Friday, September 07, 2012 9:28 AM UT

@jacques..Yep I did used this dump only and I also made Mad Dogg changes - all the 44 qstns were from this dump. Like I said some of the answers aren't correct - otherwise I should have Totaled <>Go for it before they change it

jacques South africa

Friday, September 07, 2012 9:08 AM UT

MCSE did you just use this dump as your resource ???? did you also use mad dog's additions. i edited the orginal vce with mad dog's answers so i just want to confirm that its legit before i upload it

MCSE-Again

Friday, September 07, 2012 6:31 AM UT

Dump valid in S.A....ther are some wrong answers though but i got 883 / 1000. No stress !!!!!

LVilleSystemsJockey

Friday, September 07, 2012 3:59 AM UT

Okay, There are at least 2 questions relating to Orchestrator asking you to select the category you would add an activity from in order to monitor when a file gets added to a folder. The answer is wrong because this question is designed to make you think it would be the MONITORING category, but the Monitor Folder activity is actually located under the FILE MANAGEMENT category. Nice one microsoft. Hope you guys catch this comment to help raise your score.

PM

Thursday, September 06, 2012 4:23 PM UT

Dump is valid. I scored 900. I followed same approach as Mad Dog mentioned here.

JB

Thursday, September 06, 2012 2:30 PM UT

Dump is valid. Passed yesterday with a 900. I ONLY used this dump and nothing else.

-JB

Cajun

Tuesday, September 04, 2012 2:15 PM UT

Dump is Valid with 833 in Trinidad

jacques

Tuesday, September 04, 2012 8:11 AM UT

all the best michael kick some ass....let me know how it went. i will be holding thumbs for you

draven76

Tuesday, September 04, 2012 1:45 AM UT

@Mad Dog
I did.. score: 900 ;)
thanks!

michael

Monday, September 03, 2012 1:36 PM UT

Jacques@ I will write this coming friday bro let you know the feedback.

jacques

Monday, September 03, 2012 1:23 PM UT

@michael have you taken this exam yet i want to take it too. just wanted to confirm that its legit for south africa ???

i am here in cape town

jacques

Monday, September 03, 2012 1:19 PM UT

yeah i agree @michael if i may ask when are you looking to write the test ????

Michael

Monday, September 03, 2012 8:30 AM UT

Kintauro@ I think you right , i did check and compare to Q6 in the same dump the answer is A, FROM THE FIREWALL, ALLOW TCP 51909 FROM NETWORK1 TO NETWORK2.

lyh

Sunday, September 02, 2012 2:38 AM UT

thx, Still valid in KOREA, passed with 833 points.

Bogus

Friday, August 31, 2012 6:16 PM UT

Still valid in CANADA, passed with 800 points.
44 questions and some answer are in diffrent order!

Aurora13

Friday, August 31, 2012 3:09 PM UT

Passed today with 883 points. All questions where from this dump and I went with the answers of Mad Dog.

Kintauro

Friday, August 31, 2012 1:08 PM UT

I think this might be wrong:

Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure.

The network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.

The private cloud contains two servers. The servers are configured as shown in the following table.

SERVER 1 - AUDIT COLLECTION SERVICES FORWARDER - NETWORK1
SERVER 2 - AUDIT COLLECTION SERVICES COLLECTOR - NETWORK2

The network segments are separated by a firewall. All of the TCP ports from 1 to 1024 are allowed on the firewall.
You need to ensure that Server2 can send security events to Server1.
What should you do?

->Dump says C:
(From the firewall, allow TCP 51909 from Network2 to Network1)

-> I think: F
(From the firewall, allow TCP 51909 from Network1 to Network2)

'cause the forwarder needs to connect to the collector , not vice versa?
Please confirm?

James

Friday, August 31, 2012 11:59 AM UT

valid! I got 850

Mad Dog

Thursday, August 30, 2012 8:11 AM UT

@draven76..Hope you'l pass..let me know!

draven76

Wednesday, August 29, 2012 11:21 AM UT

@Mad Dog
My exam is tomorrow so I'll try to check today the q/a you pointed out. By the way, if unsure of the answers, I'll go with yours and try to score as you! ;)

Mad Dog

Wednesday, August 29, 2012 8:56 AM UT

Exam B (Operations Manager)

Q2. VCE says B. a User Role, but I believe this should be A. a channel since a notification channel is required before Opsmgr can send SMS/IM/Email to any subscriber.
See also Q31

Q6&7
I believe this should be a monitor.. a SLO is used to measure availability of performance of an entire service not just one process/host

Q25
As said earlier, i also think that this should be D. a distributed application model

Exam C (Service Manager)

Q6&7
Answer in VCE is to Register the Orchestrator Integration Packs
Since the question is "What should you do from Service Manager"
and Integration Packs are registered in Orchestrator, I believe the answer to these questions should be something else.
I picked "Selet the sync folder for the Orchestrator Connector"

Q19
Only one selection can be made. This should be the 'Lists'

Exam F (Orchestrator)

Q3
I went for Check Out Runbook - Start from Runbook Tester - Provide Input parameters
But i believe this is wrong..can't tell you waht it should be though

These were the adjustments I made..and it brought me a 900 score
This means there are still errors in either the answers I did or the ones I did not change :)

Good luck!

draven76

Tuesday, August 28, 2012 11:15 AM UT

@Mad Dog
Could you point out the correct q/a? Thanks

Mad Dog

Tuesday, August 28, 2012 8:38 AM UT

Valid in the Netherlands.
All questions came from this dump. Despite some errors in the VCE, I passed today with a 900 score (i did answer a few questions differently)

ASBJÖRN

Monday, August 27, 2012 2:03 PM UT

hi, passed that exam today. Over 800 ;-D all Q from the dump

Haytham Zahran

Monday, August 27, 2012 10:20 AM UT

valid in egypt all the q from this dump but it seems to be som wrong answers so i passed with 833 / 1000 thank u so much
any one know the best dumb for 70-247 ???

Pasu

Saturday, August 25, 2012 1:35 PM UT

100% valid. Passed today. Wrong answers in it, but still enough for pass.

Radu

Friday, August 24, 2012 4:06 PM UT

It is still valid. Today have passed it with 813. Good luck and Big thank you to the author.

PHX

Friday, August 24, 2012 3:51 PM UT

still valid. Today passed with 814. Some answers is wrong.

rainer

Thursday, August 23, 2012 10:14 AM UT

passed today in Germany with 783 points. 110 Minutes, 44 questions, no extra time for non-native speaker granted (exam was taken in English)?! had altogether 6 or 7 click or drag/drop scenarios which ruined my score ;-) On the other hand very high confidence in this file.

del jean

Thursday, August 23, 2012 9:49 AM UT

@tjmcrae
Please I could not download the videos. Can you please direct me on how to download the videos?

mose

Thursday, August 23, 2012 7:18 AM UT

passed today with 813 thx.

tjmcrae

Thursday, August 23, 2012 2:07 AM UT

no books available, but download the jumpstart videos onto your smartphone and go through these as many times as you can

http://technet.microsoft.com/en-us/video/private-cloud-jump-start-01-introduction-to-the-microsoft-private-cloud-with-system-center-2012.aspx

greekman

Wednesday, August 22, 2012 7:33 PM UT

please help me what books to study for this exam?

JapaBrasil

Tuesday, August 21, 2012 3:06 PM UT

examination successfully done 20-08 days WITH 810 POINTS.
Dump valid!
thx guys

Ganu

Tuesday, August 21, 2012 10:09 AM UT

Passed with 833 today

stvo

Monday, August 20, 2012 8:54 AM UT

passed today with 783 this is still valid

jae jun Ryu

Sunday, August 19, 2012 6:00 AM UT

pass 833 Thanks

korea ryu

raj

Saturday, August 18, 2012 1:00 PM UT

passed today with 813 this is still valid

Tycoonbob

Thursday, August 16, 2012 8:24 PM UT

Passed this exam today, with a 866. Only study this dump, but do have experience with all the System Center 2012 products.

Hany From Egypt

Tuesday, August 14, 2012 10:31 PM UT

This exam valid in Egypt passed today with score 833

JapaBrasil

Tuesday, August 14, 2012 3:26 AM UT

this file and 100% valid?
It is possible to pass the exam only by studying it?

Ahmed Raafat

Sunday, August 12, 2012 11:00 AM UT

Pass today with 880
thanks

Pravin

Wednesday, August 08, 2012 6:37 AM UT

Passed in India with 833 marks still dumps is valid

AdinE

Tuesday, August 07, 2012 6:25 PM UT

@HP/All:

There are 5 sections to the exam (based on the printout from the score) as follows:

1. Configure Data Center Process Automation (17%)
2. Deploy Resource Monitoring (20%)
3. Monitor Resources (23%)
4. Configure and Maintain Service Management (18%)
5. Manage Configuration and Protection (22%)

NOTE: This is the same section information as is available on the Microsoft website (https://www.microsoft.com/learning/en/us/exam.aspx?id=70-246#tab2).

HP

Monday, August 06, 2012 10:38 AM UT

Can somebody who has succeeded the exam tell us from there score on which sibject(monitoring, automation,..) we need to focus on? In other words which answers were fault.

smith

Sunday, August 05, 2012 3:15 PM UT

hi Mahmoud and Patryk, is this the dump you only used? Please advise the soonest thanks!

mahmoud Odeh

Sunday, August 05, 2012 12:15 PM UT

Pass today Thanks

Patryk

Friday, August 03, 2012 11:05 AM UT

Pass today :-) Thanks

AdinE

Thursday, August 02, 2012 2:38 PM UT

@Jack: Yes all the questions were from this dump.

Jack

Thursday, August 02, 2012 2:12 PM UT

@ Adine. did you got all questions from the dump?.

AdinE

Thursday, August 02, 2012 1:34 PM UT

Hi all,

Passed today with 866. Here's some details:
Duration: 110 minutes
# of Q: 44

Fireblade

Wednesday, August 01, 2012 10:38 PM UT

Hi All,
I think the answer will be like this:
1-Start the runbook from runbook tester
2-provide the input parameters
3-check in the runbook

Because he didn't mention in the question that he checked In the Runbook, he just said that he created the Runbook and you can't create a Runbook while it is checked In, so it is already checked out.

any thoughts??

mic1

Tuesday, July 31, 2012 2:22 PM UT

Just Pass with 850, dump is still valid. Thanks

Mando

Monday, July 30, 2012 3:51 PM UT

We are Waiting Exam Result on Thursday . Hope you Succeed.

pepper

Sunday, July 29, 2012 8:35 PM UT

Hi guys,

I think monitor is probably the right answer, it looks like the SLO stuff can also monitor for cpu but it seems an odd way to do it and im not sure it would fulfil the alert requirement fully.

Exam on tuesday so will let you guys know how i get on.

HP

Sunday, July 29, 2012 5:14 PM UT

Q: set the state of Server1 to critical if CPU utilization by App1 exceeds 80% for 5min.

Solution in current VCE: SLO
I think this needs to be monitor.
SLO is only to verify the service and run reports afterwards

Rules are used for collecting performance data or to run scripts and Monitors check on the health state of a component.

Besides that, monitors work different compared to rules. Monitors collect data from various sources and based on that information decide the health status of the monitored object (red, yellow or green).

AdinE

Friday, July 27, 2012 7:48 PM UT

@All: I just wanted to let you know that I had to re-schedule my exam for Thursday. I'll let you know how it goes.

AdinE

Friday, July 27, 2012 5:05 PM UT

@Pepper: Hey 'P', what do you think of the OpsMgr Q6 being changed from "a Service Level Objective (SLO)" to "a monitor"? Validate?

AdinE

Friday, July 27, 2012 4:57 PM UT

@Pepper: Thanks Pepper. I will make that change and re-upload (now as v 6.6). We'll run with that, until others contribute with updated questions, etc.

Here's the link to the updated VCE: http://www.slingfile.com/file/L4iq24d8Vp

Let me know of any other changes.

pepper

Friday, July 27, 2012 4:48 PM UT

@AdinE I think you might be spot on about that question. I looked into it a bit more and I don't think you could create a diagram/dashboard for the information without making the DA model first. Found some good supporting info here:

http://blog.xplatxperts.com/xplat-xperts/2009/10/operations-manager-and-distributed-applications-part-2.html

AdinE

Friday, July 27, 2012 4:28 PM UT

@Pepper:

For the OpsMgr question (Exam B Q25), it says:

"You have a line-of-business web application named App1. App1 stores its information in a dedicated Microsoft SQL Server 2008 database.

You need to create a central diagram that contains the complete health information of App1.

You import the SQL, IIS, and Windows Server management packs.

What should you create NEXT?" (next being the key word here)

- To me, I would think that you FIRST need to create a Distributed Application model, before you could even start thinking about creating a Dashboard View. Just because the MPs were imported, and it discovers all the pieces, doesn't mean it will easily/automatically show "the complete health information of App1".

When I read "central diagram" I immediately think of a DA, since you add all the components that make up that application, which would roll-up to the health state of the application. So at first I would think the answer should be "a Distributed Application model", and then second "a Dashboard View."

I agree with you on the point about the SLD, as that is more of an SLA/SLO thing. Thoughts?

pepper

Friday, July 27, 2012 3:58 PM UT

@AdinE I'm happy with the runbook answer unless anyone else thinks otherwise??

Q19 Exam C should be lists, page here confirms you could made a new incident classification for them to be attached to:
http://systemscenter.ru/scsm_help.en/html/418a72b4-e588-4b40-bd58-4d5089f0a195.htm

The Ops Mgr question I mentioned before is Q25 exam B.

AdinE

Friday, July 27, 2012 3:33 PM UT

@Pepper: If you are in agreement, I will change the answers for the Runbook Tester question. Also, if you could review TimeZone's answer to Q19 on Exam C, I'd appreciate that. I will review the answer in my lab to verify, and also look into the OpsMgr question (what exam/Q# was it?). Thanks for your contributions.

AdinE

Friday, July 27, 2012 3:30 PM UT

@Lord: Would you like to help us correct the errors in the dump?

Lord

Friday, July 27, 2012 1:13 PM UT

There is several errors in the dump, but it's enough to pass the exam. I passed it today with 850

pepper

Friday, July 27, 2012 10:38 AM UT

Looking into another question on Ops manager,

line-of-business web application named App1.

Need to create a central diagram that contains the complete health information of App1.

For me the Service Level Dashboard looks to be based more on SLO compliance rather than health (ie has it achieved 99% uptime etc). I'm think it's more likely we either create a new dashboard with a selection of custom health monitors. See the example here:

http://blogs.technet.com/b/momteam/archive/2011/09/27/introducing-operations-manager-2012-dashboards.aspx

However.. the line in the question "you need to create a central DIAGRAM that contains the complete health information of App1" pushes me down the diagram view answer. as you would literally create a new diagram showing the health status of the components as shown on this page:

http://technet.microsoft.com/library/hh230762.aspx#bkmk_dashboardviewtype

pepper

Friday, July 27, 2012 7:06 AM UT

@Adine

Think I agree with your order for the runbook question. Found this MS pdf:
http://www.technicalwritingprofessional.com/images/Orch2012_RunbkGuidanc.pdf

1. In the Runbook Designer, open the runbook.
2. Click Runbook Tester.
3. If prompted, click Yes to check out the runbook.
4. To run through the runbook from beginning to end, without stopping click Run to
Breakpoint.
If you want to step through it one activity at a time, click Step.
5. View the Log pane to see the completion status of each activity. View the details and
published data from an activity by selecting it and clicking Show Details.

I had a go with a runbook in hyper-v and it did prompt me for input when I ran it in tester so that is a logical 3rd step. Like you say checking it back in is not required in the context of the question.

Mando

Friday, July 27, 2012 6:17 AM UT

@TimeZone,@AdinE,@pepper and @All
Really Thanks for your cooperation, you are like a Candle for the others .
@Adin .. we waiting your exam feedback on Tuesday, I wish from all of my Heart to success . Thanks

HP

Friday, July 27, 2012 6:12 AM UT

@Timezone

It should be "List", don't know that this option was/is in the possible answer list.
http://www.windowsnetworking.com/articles_tutorials/Microsoft-System-Center-Service-Manager-Part4.html

AdinE

Thursday, July 26, 2012 10:03 PM UT

@TimeZone: Thanks for that. Were there any new questions? Are there any other changes I need to make to this dump? Thanks a lot. Based on your response, I think I will take the exam on Tuesday.

TimeZone

Thursday, July 26, 2012 9:32 PM UT

You can choose only one hot area in the exam for the Q19 exam C:
Your company has a private cloud that contains a System Center 2012 Service Manager Infrastructure.
The help desk uses Service Manager to manage and track incidents.
Service desk analysts report that they recieve many Windows 7-related incidents.
You need to create a classification for the Windows 7-related incidents.
What should you configure to create the classification?
To answer, select the appropriate configuration in the answer area.

I choosed Templates

TimeZone

Thursday, July 26, 2012 9:24 PM UT

@jack. All Questions where in this Dump 100% - The min. passing score is 700 pts.

AdinE

Thursday, July 26, 2012 8:39 PM UT

@Pepper: I read both articles, and based on the answer selection for the question, I think it would be the following:

1. Start the runbook from the Runbook Tester.
2. Check out the runbook. (this is because the Runbook Tester should prompt you to check it out)
3. Provide the input parameters.

The question doesn't say anything about applying changes, or saving anything, just that "You need to verify that the runbook executes successfully."

Thoughts?

jack

Thursday, July 26, 2012 3:20 PM UT

@ time zone. did you got all questions from the dump. can you tell whats the pass score for exam 700 or 800?.

TimeZone

Thursday, July 26, 2012 2:35 PM UT

Passed today with 850 ! I had few Q's that I answered different from the dump itself. I will provide you guys it later

pepper

Thursday, July 26, 2012 1:50 PM UT

sorry missed a link:

this post says about being prompted to check out after running the book: http://technet.microsoft.com/en-us/library/hh403809

pepper

Thursday, July 26, 2012 1:49 PM UT

I've been looking into the exam and I'm unsure about one of the questions in the orchestrator section. The ordered list about the runbook seems wrong as I see it. There is a brief outline here of the process:
http://blogs.technet.com/b/meamcs/archive/2012/03/14/system-center-orchestrator-2012-test-amp-start-runbooks.aspx

Despite that I still think it will require the "provide the input parameters" stage. The document above suggests the check out might be automatic as part of running the tester. The blog here has an example with input parameters and clearly shows that they are asked for as part of the test:

http://msandbu.wordpress.com/2012/06/29/orchestrator-2012/

This post suggests the "check out" process will be prompted for while running the test.

So for me the answer might be:
Start the runbook from runbook tester
provide the input parameters
check in the runbook

any thoughts??

Microsoft.BrainDump.70-246.v2012-07-25.by.AdinE.71q.vce

Elie

**HULK**

Aiman

**HULK*

Aiman Khawaldeh (UAE)

student

Alfil

kita2010

AMWahab

Brian

Matths

John

kunngoc

SeriousSam

gds

jacques South Africa

Michael

jacques SOuth africa

MCSE-Again

jacques South africa

MCSE-Again

LVilleSystemsJockey

PM

JB

Cajun

jacques

draven76

michael

jacques

jacques

Michael

lyh

Bogus

Aurora13

Kintauro

James

Mad Dog

draven76

Mad Dog

draven76

Mad Dog

ASBJÖRN

Haytham Zahran

Pasu

Radu

PHX

rainer

del jean

mose

tjmcrae

greekman

JapaBrasil

Ganu

stvo

jae jun Ryu

raj

Tycoonbob

Hany From Egypt

JapaBrasil

Ahmed Raafat

Pravin

AdinE

HP

smith

mahmoud Odeh

Patryk

AdinE

Jack

AdinE

Fireblade

mic1

Mando

pepper

HP

AdinE

AdinE

AdinE

pepper

AdinE

HULK