Download HP.ActualAnswers.HP0-S35.v2013-02-19.by.LoL.63q.vce

Exam: HP0-S35 - Implementing HP BladeSystem Solutions
Size: 1.45 MB
# of downloads: 10
Free Download:

Rating:

1 liked this dump 0 disliked
Click here to Like Dislike

VCE Simulator for HP HP0-S35 Exam
Comments

* The most recent comments are at the top.

Note:

Use VCE Exam Simulator only to play VCE files properly.


pumba

  • Ukraine
  • Feb 27, 2013
  • Report Comment

( HP procurve switch on X1, X2 and EVA on ports X5 and X6)

A FlexFabnc Virtual Connect is connected to embedded B-series switches of an EVA4400 for SAN Connectivity and a ProCurve 2910al wrth 10 GbE module Ethernet. The customer reports that Ethernet connectivity is working, but not to the customer's SAN.

a) The embedded switches on the EVA4400 do not support NPIV
b) The embedded switches on the EVA4400 do not support FCOE
c) The uplink configuration is not supported
d) PfoCurve 2910al is not supported in this configuration


edv

  • Russian Federation
  • Feb 26, 2013
  • Report Comment

-----
6. A customer wants to enable load balancing in a Vmware environment - what is the best route to do this?
b. Enable DRS

http://www.vmware.com/technical-resources/high-availability/load-balancing-resources.html
-----
7. How does virtual connect refer to fiber channel technology?
b. FCOE

http://h18004.www1.hp.com/products/blades/virtualconnect/index.html#vc4 (Simplify infrastructure with Dual-hop

FCoE)
-----
8. In this scenario why is the user not connecting to the EVA?
(Picture of Flexfabric module connected to a HP procurve switch on X1, X2 and EVA on ports X5 and X6)
a. Uplinks are configured incorrectly

http://h18004.www1.hp.com/products/quickspecs/13652_div/13652_div.html (X5 - X8 only for Ethernet, X1 - X4 SFP+)
-----
9. What protects against 8 - bit parity mode error detection?
it's ECC memory
ECC encodes information in a block of 8 bits to permit the recovery of a single-bit error.

ftp://ftp.hp.com/pub/c-products/servers/options/c00256943.pdf
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02126499/c02126499.pdf
-----


edv

  • Russian Federation
  • Feb 26, 2013
  • Report Comment

-----
1. Definition of RPO-
a. It is the maximum tolerable period in which data might be lost from an IT service due to a major incident

http://en.wikipedia.org/wiki/Recovery_point_objective
-----
2. What Filessytems does ESXi 5.0 support?
b. VMFS V5

http://en.wikipedia.org/wiki/VMware_VMFS
-----
3. What is the definition of a Hot aisle?
c. Servers facing back to back

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02507744/c02507744.pdf (page 8)
-----
4. A customer purchased a 10700 G2 rack and with a fully populated C7000 and HP UPS R7000 what is the optimal

position for the UPS and C7000 so the rack will be balanced?
c. Move the UPS on top of the C7000

"HP 10000 G2 Series Rack User Guide" - WARNING: To reduce the risk of personal injury or damage to the equipment,

always load the heaviest item first from the bottom of the rack up.
-----
5. How would you perform NIC teaming in a HP environment with Windows Server 2008 R2?
b. Network Configuration Utility

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01663264/c01663264.pdf (page 2, Software requirements)
-----


nadeo

  • United States
  • Feb 25, 2013
  • Report Comment

few things i remember:

- What is the name of the file you need to make a scripted Windows Deployment -> unattend.txt

- Definition which best suits for "disaster recovery"

-Wich cmd to use in order to show Windows version -> ver

- A question about watercooling


MaaShar

  • Belgium
  • Feb 25, 2013
  • Report Comment

edv,

thank you for your interaction, but I know it is getting complicated :)
In the comments LoLHP added 26 additional questions (which I also had on my exam). The answers I gave are for those questions in the comments and not for the questions in the dump. In the dump it is 7c indeed, but question 7 in the comments is:

7. How does virtual connect refer to fiber channel technology?
a. FC port
b. FCOE
c. FCIP

I hope you understand what I mean..


edv

  • Russian Federation
  • Feb 25, 2013
  • Report Comment

Sorry?

QUESTION 7

Correct Answer: C


edv

  • Russian Federation
  • Feb 25, 2013
  • Report Comment

QUESTION 7
Which functionality is enabled with the HP Insight Control for System Center management add- on?

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03020752/c03020752.pdf (page 3, last paragraph)

"you can move virtual machines either automatically or manually if a host hardware pre-failure event occurs"


Lpuyg

  • Belgium
  • Feb 24, 2013
  • Report Comment

Quick comment:
3 is c) because a) is for cold aisle.
Hot aisle is back to back
http://www.42u.com/cooling/hot-aisle-containment.htm#what-is


MaaShar

  • Belgium
  • Feb 24, 2013
  • Report Comment

Some changements after research, feel free to add information or correct me :)

4c Most heavy part on bottom
R7000 - 165 lbs/75 kg
C7000 - 192 lbs/87 kg (= bare enclosure, not fully populated)

6b http://www.vmware.com/technical-resources/high-availability/load-balancing-resources.html

7a or b?

8 no idea?

9 mirrored memory? http://h18004.www1.hp.com/products/servers/technology/memoryprotection.html
Multibit error protection

12ac and online spare - http://h18004.www1.hp.com/products/quickspecs/14208_div/14208_div.html
Memory protection

14 http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01215727/c01215727.pdf - p14

15d critical error

17 I know Diskpart is the utility and Expand is the command within Diskpart - any suggestion which might be the correct answer?

18 http://www.tricksguide.com/assign-configure-online-spare-hard-drive-to-a-raid-array-using-hp-orca.html

19 ? prefailure warnings are for CPU's, disks and memory.. No idea which is the correct answer here

20 http://h20000.www2.hp.com/bc/docs/support/SupportManual/c03207602/c03207602.pdf
Page 4

25 d or c?


MaaShar

  • Belgium
  • Feb 24, 2013
  • Report Comment

LoLHP, thank you very much! I had all those questions as well. This is how I should answer these questions:

1a
2cd
3a
4b
5b
6c
7a
8?
9a?
10b
11d
12c and online spare/mirrored
13ac
14 issue that needs to be addressed
15c
16c
17b
18d
19c
20b
21bc
22?
23c
24acd?
24a and tagged frames dropped
25d
26 HP SUM/HP SMH?


LoLHP

  • United States
  • Feb 24, 2013
  • Report Comment

19. What is something that HP agentless management can monitor and proactively notify prior to failure?
a. Fans
b. Power supply
c. Disks
d. CPU

20. What is the speed of the network on the ILo management port in Gen 8?
a. 10Gbps
b. 1Gbps
c. 100Mbs
d. 10Mbs

21. What are some advantages of ILo4 versus Ilo3
a. Remote deployment
b. Embedded remote support
c. HP agentless managent
d. Remote media



22. What are three troubleshooting areas for a FC EVA array? (Choose 3)
a. Server smart array
b. FC zoning
c. IFM on the SAN switch
d.
e.


23. What is required for an iPDU to collect information?
a. Power over Ethernet
b. Mini USB cable
c. SNMP traps configured
d. Null serial cable


24. Which tools can you use to design SAN infrastructure connecting to a 3rd party array? (Choose Three)
A HP SPOCK
B Product Bulletin
C EBS
D SAN design

24 . What describes the flex fabric module layer 2: (choose 2)
a. Does not participate in LACP
b. Ignores Link Layer Protocol Detection (LLDP)
c. Drops Jumbo frames
d.

25 . A customer has two C3000's with flexfabric modules and does not have VCEM what would be the recommended for mac addressing?
A. Let the mac addresses automatically populate, you'll be fine.
B. Join the two virtual connect domains
C. Use a range for the first enclosure and manually assign the second enclosure
D. Assign different mac address ranges so there will be no conflicting mac addresses

26. How to find out what version of SAS firmware is installed in a HP BL460C
A.
B.


LoLHP

  • United States
  • Feb 24, 2013
  • Report Comment

12. What memory protection is available to a BL460c Gen 8?
a.Lockstep
b. Non-Lockstep
c. Advanced ECC protection
d.
e.

13. What is required on a server to use Server Deployment in Insight control?
a.PXE
b.DNS
c.DHCP
d.SNMP



14. A light is flashing on insight display, what does this mean?
A user is connected to ILo
There is an issue that needs to be addressed

15. What color is the notation in Insight control if a Fan fails?
a. Green
b. Yellow
c. Amber
d. Red

16. You are at a customers site and you get errors that state virtual connect domain locks, and the web interace states : bypass web page, why?
a.
b.
c. Not enough permissions to make changes to the virtual domain
d. Virtual connect is being managed by VCEM

17. You are looking to expand a raid what command is needed to do this?
a. EXPAND
b. DISKPART
c. AU CLI
d.

18. You want to create a online spare of a Raid 1 what is needed in order to accommodate this?
a. 2 extra disks
b. P770 controller
c. Smart Array advanced License
d. ORCA


LoLHP

  • United States
  • Feb 24, 2013
  • Report Comment

6.A customer wants to enable load balancing in a Vmware environment - what is the best route to do this?
a. Vmotion
b. Enable DRS
c. Vmware HA


7. How does virtual connect refer to fiber channel technology?
a. FC port
b. FCOE
c. FCIP

8. In this scenario why is the user not connecting to the EVA?
(Picture of Flexfabric module connected to a HP procurve switch on X1, X2 and EVA on ports X5 and X6)
a. Uplinks are configured incorrectly
b. CNA is not enabled for Fiber Channel
c.


9. What protects against 8 - bit parity mode error detection?
a.Online sparing



10. What is required to configured Lockstep mode on a Bl460 Gen 8?
a. 1066 Mhz memory configuration
b.Dual rank memory configuration
c. Low power disabled


11. A customer wants to to do a software raid on a BL860i what tool is used?
A.
B.
C.
d. ORCA


LoLHP

  • United States
  • Feb 24, 2013
  • Report Comment

Here are some i've collected, hopefully this will help jog your memory:

1. Definition of RPO-
a. It is the maximum tolerable period in which data might be lost from an IT service due to a major incident
b. Time it takes to recover data
c. How much data can be lost

2. What Filessytems does ESXi 5.0 support?

a. VMFS V3
b. VMFS V5
c. Ext 3
d. Ext 2

3.What is the definition of a Hot aisle?
a.Servers facing Front to font
b.Servers facing back to front
c. Servers facing back to back
d. Servers facing front to back

4. A customer purchased a 10700 G2 rack and with a fully populated C7000 and HP UPS R7000 what is the optimal position for the UPS and C7000 so the rack will be balanced?
a. Put the C7000 on top and the UPS on the bottom
b. Move the C7000 up and but the UPS right underneath
c. Move the UPS on top of the C7000
d. Move the UPS to the top of the rack and the C7000 to the bottom of the rack

5. How would you perform NIC teaming in a HP environment with Windows Server 2008 R2?
a. Windows Server Manager
b. Network Configuration Utility
c. From Vcenter


MaaShar

  • Belgium
  • Feb 23, 2013
  • Report Comment

This is what I remember from the exam. It's not always very clear what the question exactly is, but maybe some other have had the same questions so we can compose them again.

1 Filesystem types for ESX5 (ext3/ext2/VMFSv3/VMFSv5/NTFS)
2 RPO recovery point Objective - what is it?
3 what is needed - flash player/VCRM/.
4 flashing enclosure screen - someone on OA/iLO/heartbeat/failure/..
5 server deployment, what needed - DHCP/PXE/SNMP/WEBES/.
6 2 new features of iLO 4 (agentless mgmt/embedded remote support/..)
7 IPDU communication (PoE/serial connection/..)
8 prefailure hardware (memory/CPU/fans/..)
9 BL460c memory configs (ECC/lockstep/non-lockstep/..)
10 largest tape blade for customer - 1760c/3000c/..
11 iLO 4 default speed (100MB/1GB/10GB/dedicated/..)
12 Difference GPT en MBR (1028 of 2048 bytes support/up to 2TB partition size/..)
13 If using D2200sb, what is needed (P770 controller/1GB write cache/license/..)
14 which interconnect bays should be populated when mezzanine 2 is installed in blade?
15 if all settings are lost during power failure, from where recover? (OA back-up/VC back-up/..)
16 DL680 server RAID 1 mirrored wanted - (2 extra disks/p770 controller/..)
17 False positive in HP SIM (increase from 1 to 5 tries/adjust time it has to be unavailable/..)


LoLHP

  • United States
  • Feb 23, 2013
  • Report Comment

Alot of the questions are still missing, can anyone post some of the questions they remember on the exam so I can provide an updated revision?


MaaShar

  • Belgium
  • Feb 23, 2013
  • Report Comment

I also have a remark on my own comment.
- update SPP on 5 W2K8R2 and 5 RHEL6
Booting all of them from SPP DVD is probably a valid option, but not the fastest one. Then I would say 'Update all targets remotely at the same time from one instance of HP Smart Update Manager from a client' is the correct answer? Why should you update the windows servers at a different time than the RHEL servers?


LoLHP

  • United States
  • Feb 22, 2013
  • Report Comment

I've uploaded a 3rd revision based on some of the feedback. I think we are getting closer.


LoLHP

  • United States
  • Feb 22, 2013
  • Report Comment

Also MaaShar - You are correct MSSW for Matrix, License manager is also a correct answer, but HP recommends MSSW, this is from the Matrix setup doc:

Recommended process: Use the managed system setup wizard HP recommends using the Insight managed system setup wizard to add and apply licenses for Matrix OE. To start the managed system setup wizard, select Configure→Managed System Setup Wizard.. from the top menu bar. Help is available in each step of the wizard. For more information about the managed system setup wizard, see "Using the Insight managed system setup wizard" (page 20), and the Insight Managed System Setup Wizard Getting Started Guide available from http://www.hp.com/go/matrixoe/docs.


LoLHP

  • United States
  • Feb 22, 2013
  • Report Comment

I agree with some of the comments here. Knowing the material is vital to pass.

I also found a link that confirms cold asile containment, I just was not sure on this one, but now we know the correct answer IS front to front :
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&ved=0CF0QFjAE&url=http%3A%2F%2Fwww.apcmedia.com%2Fsalestools%2FDBOY-7EDLE8_R0_EN.pdf&ei=SdMnUeSoK6eOiALj1YDYCg&usg=AFQjCNGKUnlNGlx5dUTPeY1yVhHFZcHP6A&bvm=bv.42768644,d.cGE&cad=rja


anonymous

  • Cyprus
  • Feb 22, 2013
  • Report Comment

The Onboard Administrator screenshot below displays a c7000 enclosure showing the port mapping of Interconnect Bay3.
New ProLiant BL460c blade servers are installed in Bays 2,5,6,10,13 and 14. All newly installed blade servers are correctly configured with mezzanine card.

How many unused Device Bay ports will be shown after populating these new blades?

On this question only 6 servers actually seem to be connected which means some of them are not correctly configured (the photo of the enclosure shows 9 used ports 7 empty). So 6 connected and 6 new to be connected = 12. That leaves 4 empty.Answer is 4 in my opinion.


oso

  • Czech Republic
  • Feb 22, 2013
  • Report Comment

Today I'm not passed get 62, lot of new questions.


Maya

  • South Africa
  • Feb 22, 2013
  • Report Comment

I have worked through the answers and uploaded an updated file, I have added comments where I changed the answers


MaaShar

  • Belgium
  • Feb 21, 2013
  • Report Comment

Indeed, thank you for the link!


anonymous

  • Cyprus
  • Feb 21, 2013
  • Report Comment

- In case of failure, which part is CSR? - Onboard Admin Link Module
Correct asnwer is KVM module.
http://h18033.www1.hp.com/support/selfrepair/ww/replace_part.asp?myinc=e011


MaaShar

  • Belgium
  • Feb 21, 2013
  • Report Comment

Looks more valid than previous one. I still think some answers are wrong. Below the questions I should answer differently. Feel free to prove I'm wrong :)

- In case of failure, which part is CSR? - Onboard Admin Link Module
- cold-aisle containment - Racks front to front
- update SPP on 5 W2K8R2 and 5 RHEL6 - Boot each server fom the SPP DVD, using OA
- a group of 20 blades configure and license from MOE - Run MSSW against all systems
- C7000 fully populated with PSUs, how should power be configured? - N+1 power mode
- After replacing OA, different firmware - Launch the OA GUI and synchronize (http://h30499.www3.hp.com/t5/HP-BladeSystem-Management/Onboard-Administrator-OA-replacement-procedure/td-p/5929093)
- As admin, required to monitor max CPU time - on exam you can choose 2 options from 5 possibilities
- Which filesystem can be used on a Linux OS - on exam you can choose 2 options from 5 possibilities (ext2/ext3/VMFSv3/VMFSv5/NTFS) - ext2/ext3 correct
- How many unused device bay ports will be shown? - Can anyone explain this question? Looks like the questions is missing some details, no?
There isn't mentioned how many new servers will be inserted?

Passing score is 70 by the way and not 80 :)

Report Comment

Verify:

Add Comment

Name: *
E-mail: *

This e-mail will not be published.

Comment: *

Comment will be moderated and published within 1-4 hours.

Rate file: * Like!     Dislike
Verification: * Secure Code
Type the characters from the picture.  
VCE Exam Simulator Free DemoVCE Exam Simulator Free Demo
Read about VCE Exam Simulator
Download VCE Exam Simulator
Prep4sure - Professional IT Certification Training
BrainDumps - Get Real Exam Questions
Actual Tests - Lifetime Access to IT Exams

Site Search:

Close
Only Registered Members Can Download VCE Files

Please fill out your email address below in order to Download VCE files or view Training Courses. Registration is Free and Easy, You Simply need to provide an email address.

  • Trusted By 1.2M IT Certification Candidates Every Month
  • VCE Files Simulate Real exam environment
  • Instant download After Registration.
Please provide a correct E-mail address
Email Address:

A confirmation link will be sent to this email address to verify your login.
Already Member? Click Here to Login

Close
Log into your ExamCollection Account

Please Log In to download VCE file or view Training Course

Please provide a correct E-mail address

Please provide your Password (min. 6 characters)

E-mail:
*  
Password:
* Forgot password?
 

Only registered Examcollection.com members can download vce files or view training courses.

Registration is free and easy - just provide your E-mail address. Click Here to Register

Close
DO YOU HAVE A VCE PLAYER?
Play VCE files with Avanset VCE Simulator

Your file is being downloaded.

All tests on this site have been created with VCE Exam Simulator.

VCE Exam Simulator is interactive testing engine developed for certification exam preparation.

Files with VCE extension can be opened with this program.

Before you can open any file on this site you will need to download VCE Exam Simulator

Download VCE Player
I already have it
Close
Like this VCE file?

Log in to make your opinion count.

E-mail:
*  
Password:
* Forgot password?
 

Only registered Examcollection.com members can rate files.

Registration is free and easy - just provide your E-mail address. Click Here to Register

Close

Close
Download Free Demo of VCE
Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.


Simply submit your e-mail address below to get started with our interactive software demo of your free trial.


Enter Your Email Address

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.