Citrix.Actualtests.1Y0-200.v2014-01-09.by.BoredVerifier.110q.vce

Aunos

Saturday, November 14, 2015 5:29 PM UT

This exam's invalid. I'm failed to exam. I found new question about 15-16 exam.
For this exam, it's correct about 81%.

By the way. Right now, it's Lab to exam,too. I failed to exam about LAB

Saad

Thursday, September 10, 2015 8:41 AM UT

Is this Still valid?

Jono

Monday, August 17, 2015 9:15 PM UT

I failed this exam there were 6 sims and they were very difficult, also the answers are wrong!!!

I took exam in Norway.

StayTuned

Sunday, July 26, 2015 6:31 PM UT

@CitrixChamp - Could you please help to share details on Simulations for 1YO200

haas

Monday, July 13, 2015 8:26 AM UT

did it 10-07 just before being decommissioned....exam is valid although some questions provide additional answers. Be sure to build yourself a homelab to practice the simulaltions. They are absolutely not hard to nail. Simply follow the wizards and provided the given parameters. Also for the update merging read some about it and you will be fine.....

Samson

Sunday, July 12, 2015 2:24 PM UT

@okosaga

Sorry to told you that my exam was being denied by Pear___ because my candidate info wasn't match my actual name even I use that ID for my XD5 exam before :(

Sorry can't help for more but my voucher was void and they insist to refused to reschedule

CitrixChamp

Friday, July 10, 2015 5:46 PM UT

Please provide your email address and i will respond shortly

haas

Friday, July 10, 2015 12:03 PM UT

Passed todat with 850%...the 6 well known simulations...please practice in lab and know what you are doing...66 MP including two drag and drops...drag and drops in regards to profile order (options..GPO,HDX,delivery group and ini..determine high low order) other drag and drop regarding updating a vdisk...update,shutdown,inventory,assign)

managing 80%
maintaining 82%
monitoring 100%
Troubleshoot 100%

Some questions provide extra options, but the question remains te same.

okosaga

Friday, July 10, 2015 2:39 AM UT

@Samson Are you still writing your Exam tomorrow. Let me know how it goes I will be writing mine on the 11th.
@ CitrixChamp I need help with how you went about with the stimulation, especially that of vDisk merge, and the one with trust forest domain

Piet Paaldje

Sunday, July 05, 2015 11:50 AM UT

I did it. I passed the 1y0-201. None of the questions in the VCE of 1y0-200 exam was in the 1Y0-201. Al new questions. A lot about netscaler, PVS, XenDesktop en Storefront. I had 78 questions and no simulations. YES YES, I did it.

naomi

Friday, July 03, 2015 10:36 AM UT

can someone send me the simulations to practice the exam?

naomi

Friday, July 03, 2015 10:34 AM UT

can someone send me the simulations to practice the exam?

Bisdak

Friday, July 03, 2015 10:29 AM UT

This exam 1Y0-200 is discontinued. Could anyone please upload valid dumps for the latest 1Y0-201. TIA

Mr R

Thursday, July 02, 2015 11:27 AM UT

Pass today at 86%. Dump is valid except some multiple choice ask for 3 and this dump only allow 2. Simulation is as per mention by Mike. As long you can remember the steps for the simulation, you can pass.

Piet

Wednesday, July 01, 2015 2:52 PM UT

Is there anyone in the whole world who did the 1y0-201 exam. Any informatie

GGWP

Monday, June 29, 2015 3:55 PM UT

How Much fee/payment for this Exam (1Y0-200)??
Thanks

IS

Monday, June 29, 2015 1:57 PM UT

CitrixChamp , any new with the simulation qestions?

Okosaga

Sunday, June 28, 2015 6:44 AM UT

CitrixChamp have some question about the simulation. The one with Domain trust between CCH and Xitri, did you create a new store.

Nizo

Friday, June 26, 2015 2:23 PM UT

Valid passed today 26.6

Hakka CL7

Friday, June 19, 2015 3:08 PM UT

CitrixChamp, can share us the sim queston and answer? Thank you

Samson

Monday, June 15, 2015 2:24 AM UT

CitrixChamp

Look forward to see your SIM as I'll take such exam on 10 Jul - one day before it expired.

Cheers

bonito

Sunday, June 14, 2015 3:44 PM UT

HI CitrixChamp

where can get the sim queston

CitrixChamp

Thursday, June 11, 2015 11:46 AM UT

I passed with 99% today, which means I got the simulations right. Pay close attention to simulation questions and end-user requirements. Exam will be easy if you know how to create PVS XD & Streamed machines, MCS Machines in XD, Publishing apps in XD and creating stores in Storefront via Netscaler in your lab.

CitrixChamp

Wednesday, June 10, 2015 10:56 PM UT

Passed today in australia with 99% score, which means I got all the simulations correct as well.

However pls be careful, simulation requires further steps to get full marks. I will provide more details on the simulation steps shortly.

Samson

Friday, June 05, 2015 4:14 PM UT

Does this dump still valid ? I'm planned to take this exam 3-4 weeks later...

Rock

Thursday, June 04, 2015 8:12 PM UT

Please send me the 6 simulations to practice the exam.

DrSumo

Thursday, May 28, 2015 8:57 PM UT

Hi eneko23

You need to give the FQDN, in the SIM they telling you that the Controller-1 is in the CCH.com Domain, the only reason they tell you this ist because you Need to give the FQDN.
Controller-1.CCH.com i think.
For me this was Working, mabe you Need to write CCH.com instead cch.com.

Reporter

Thursday, May 28, 2015 6:08 PM UT

dumps valid... but you need to understand the simulation in order to pass the exam... scored 82%

Yun

Thursday, May 28, 2015 10:12 AM UT

@ eneko23, hypervisor addess should be in your question.
Xenserver ip address:192.168.10.5
username:root
Password: Password 1

yun

Thursday, May 28, 2015 8:28 AM UT

I have two question
1, what do I have to set up below about netscaler appliance after I choose 'no VPN tunnel' Also, what do I have to choose either netscaler pass-through or domain passthrou about adding DC on exiting sim and what is default domain going to be?

Yun

Thursday, May 28, 2015 8:01 AM UT

I have question. In 'Enable Remote Access', after I chose 'No VPN tunnel'. How do I have to set up NetScaler Gateway appliances and default appliance?

Regading SIM adding DC on existing, do I need to choose netscaler pass through or domain pass through? And what should be default domain after added Xirtic

eneko23

Wednesday, May 27, 2015 8:56 PM UT

Hi.
Just did the exam today. Same questions and SIMs. Had a huge problem with the one where you have to create devices App4, 5 and 6. After chosing the Streamed VM Wizard, I couldn't advance because when I entered the Hypervisor value, it gave me an error "Unable de connect to the server" . I tried dozens of diferent combinations and nothing. Does anybody know what value needs to go there?

Hypervisor: ???
Username: root
Password: Password1

Thanks

DrSumo

Wednesday, May 27, 2015 3:47 PM UT

Pass with 82%
Still valid in switzerland, i think no changes more changes till 15.7.15 because expiring.
But be realy take care about the 6 Sims, i think you Need at least more then 50% there to pass.....

Piet Paaldje

Wednesday, May 27, 2015 1:21 PM UT

There wil be a new exam in Juli 2015 called 1Y0-201. New questions all about versie 7.6. I hope there will also be new vce's

Ctrxjunior

Monday, May 25, 2015 2:25 PM UT

Hi All,

I passed my exam i did exactly what john smith stated for my sim but i did practice in my own lab environment. You need to be familiar with it b4 attempting the exam sims. best advise is to build your own environment and practice. I have 2 drag drop question as mention by someone below.

Jimbo

Friday, May 22, 2015 8:24 PM UT

Dump Valid, passed today with 79%

Bert

Wednesday, May 13, 2015 8:15 PM UT

Did the exam today, did not pass with 63% :-( Questions are 100% valid, but the focus is on the simulations!

Suraj

Tuesday, May 12, 2015 4:35 PM UT

Hi,
Pass last week 70%, Dumps are valid.

N.

Sunday, May 10, 2015 10:37 PM UT

It's valid! Just 3 days ago i did the exam. Failed on the 6 sims!!! 66 multiple choice no drag and drop. 13th of may retry! Could someone explain the sims in detail... so that i can redo them in my lab?

Ctrxjunior

Saturday, May 09, 2015 11:53 AM UT

Just took the exam today and failed with 54% all the questions are from the dump but the simulations are the ones i messed up in. I used
this and simulation from John.171q vce. the sims are exactly stated in there but the answers are not 100% accurate.

John

Wednesday, May 06, 2015 9:05 AM UT

Is the exam still valid?

PC

Monday, April 27, 2015 10:34 PM UT

I did the exam today and didnt pass 55%. I think the problem was the simulations. I had a look at the comment from Mike (comment from Feb 20), but the simulations are not very clear. Does anybody have clear answers? One of the sims i had to create devices app03 app04 app05, but when created each one the mac addresses were all zeros, not sure if i did it correctly. I could not assign then to the OUs, when i tryed the option create AD Account and selected the OU it did nothing.

MS

Sunday, April 26, 2015 11:53 PM UT

Can some please place right answers for simulations?

HR

Sunday, April 26, 2015 4:52 AM UT

I took the test this past week and ActualTest PDF was accurate on multichoice but not at all on SIMs, I got every multi choice correct but did horrible on 6 sims. The practice test does not shows the steps to answer sims and without a lAB I do not see how anyone can prepare for this test. Has anyone tried the TestKing Simulation exam? I used TK in past and they were pretty accurate just wondering if anyone has any input about this. Thanks!

phyo

Saturday, April 25, 2015 2:49 PM UT

passed today with 70% in Myanmar. This dump is 98% still valid only 2 new drag and drop questions as "The Chosen One" said. The 6 stimulation questions are the exact ones as "Mike" said. What I found is In two stimulation questions about provision service ( the one using XenDesktop setup wizard and Stream VM setup wizard,we do not have to create the target device first as Mike said, because the XenDesktop and Streaming wizard will take care of creating these target devices with appropriate MAC addresses. The stimulation questions are the real-world alike, so you should have hand-on experience at least on these 6 SIMs. Better to setup your little lab & go for exam.

Citrix Cert

Saturday, April 25, 2015 9:26 AM UT

Dumps are valid, gave exam and passed with 80 %, few (max 5) answers are wrong. Also, do not give exam until you are sure about simulations. Task mentioned by Mike
United StatesFeb 20, 2015 - are absolutely correct however, how to complete to simulations is not given properly , be very sure that you complete all the simulations before attempting exam as many candidates have failed due to simulations only which is 50% weightage to pass.

MS

Friday, April 24, 2015 3:48 PM UT

Can someone please explain/upload simulation answers?

MS

Friday, April 24, 2015 6:21 AM UT

Failed yesterday with 5x%. I used prem file and Test-king..John.171q vce. I am pretty sure i was perfect on all questions and failed due to simulations. Simulations answer are not correct either of files.

MS

Monday, April 20, 2015 12:57 PM UT

Has anyone passed this exam using Prem vce file? Are all the simulation answers correct in prem file? Some seems confusing...

-

Friday, April 17, 2015 8:16 AM UT

Passed 17/04/2015
Dump is valid. 66 multiple choice questions and 6 sims questions. No Drag and Drop

Citrixlover

Thursday, April 16, 2015 2:50 PM UT

I am planing for give exam this week, Is this still valid in Canada.

Skumar

Monday, April 13, 2015 1:12 PM UT

Hi All,

Kindly confirm if still valid in india also.

CCHAdmin

Thursday, April 09, 2015 8:55 AM UT

A couple of Questions / Observations

Merging vDisk sim - Merge updates only or Merge to base? Merge to base seems tidier and ticks the boxes but others seem to favour Merge Updates.

The other merge question is that the question mentions to ensure the vdisk is assigned to the right group. I assume this means check the vdisk is assigned to the devices in the right collection. There are three collections CCH-Test, CCH-Maintenance and CCH-Production. Each has some devices in.
This is really ambiguous. All I can assume is you assign the vdisk to the CCH-Production machines.

Anonymous

Friday, April 03, 2015 4:34 PM UT

Passed yesterday - 83%.
Part1: Simulation of 6 question
Part2: 66 multiple choice q and a , there was no drag and drop in my case.
A simple advise to create home based lab to get familiar with all simulation qs as those wizard and gui are not simple to grasp it quickly bust by looking at them.
Somebody asked how to App04,05 and 06,
answer is: App01,02and 03 are already created so it will automatically go to next number i.e. 04,05 and 06. I am trying to find a way to upload my file on this site and would request "boredverifier" to do his magic with file.

am

Thursday, April 02, 2015 9:39 PM UT

Q: how did you find out, how to order drag&drop answers? top-bottom or bottom-top? it's not clear

Q: how did you find out to use HTTPS in Storefront simulation? it's not written anywhere

Q: is PVP or AVHD more important here?

A Citrix Administrator creates a backup schedule that will back up all of the available vDisks.
Which two critical file types must to be added to the backup schedule?(Choose two)
A.BAK
B.PVP
C.VHD
D.LOK
E.AVHD

max

Sunday, March 22, 2015 10:51 AM UT

For the merged vDisk sim... i´am confused.
Take a look at the product documentation here: http://support.citrix.com/proddocs/topic/provisioning-60/pvs-vdisks-vhd-merge.html#pvs-vdisks-vhd-merge__vdisks-vhd-collapse-full

The Sim states that you have to maximize the reclaimed disk space.
Now when you use versioning, merging updates will reclaim the most space: the base image is alway´s the same, only the differencing files are merged.
In contrast to the merge base option: a new base image is created.
So when actually using versioning the way it´s designed the answer is simple: merged updates.

But concider this: when you decide to DELETE all the versions after the merge then the Merged Base option actually reclaims the most disk space, as there is ONLY the base left and not a base with a differencing file. (a new base image is used with al the merges) This also completely nullifies the whole concept of versioning so I´am having a hard time picking this theory, besides the fact that I think it´s the most "true": it will maximize reclaim on disk space (and provide zero options to return to previous versions). As I recall, the need that previous versions remain available was not stated in the context of the Sim. Adding further to the confusion. for me that is.

So, kinda hoping someone can destroy my theory on the merged base option. Because merged updates makes the most sense to me, and I also feel the question in the Sim is abstracted from the Citrix documentation, that specifically state that merge updates uses LESS space compared to merge base.

citrix7

Friday, March 20, 2015 1:06 PM UT

passed on 3/16/2015 at 70%. 2nd attempt. this time SIMS were identical to first, also had 66 multi questions, no drag and drop this time.

Amjad

Thursday, March 19, 2015 6:10 PM UT

Thank you so much Citrix6 for your response. well just one more help if anyone can reply with that. drag and drop and MCQ will be from these dumps, is there any website where i can find SIMS to practice or something or i need to make lab at home and practice that??? anyone passed the exam please answer.. will appreciate. God Bless

Amjad

Thursday, March 19, 2015 6:03 PM UT

Thank you so much citrix6 for you reply really appreciate. one last question if u can help me with this one. where i can get sims samples or practice them or i have to make labs and practice them?

citrix6

Tuesday, March 17, 2015 2:30 AM UT

@Amjad. sims do affect exam score, I had 1st 6 questions SIMS, 2 drag and drop, and the rest were questions like the samples here. I aced the questions 100% but did not notice postings here about sims, so bombed them as well as drag and drop. scored 50%
so based on my experience sims plus 2 drag and drop =50% of score.

Amjad

Tuesday, March 10, 2015 9:49 PM UT

Also some people has mentioned that SIMS doesnt effect the score i should just do the dumps and attempt the Exam?

Amjad

Tuesday, March 10, 2015 9:48 PM UT

Hi everyone,
i just need to ask that i cannot find SIMs in the dumps here. so if anyone could tell me where i can find the SIMS please. Thank you in advance :)

Muthu

Monday, March 09, 2015 6:11 AM UT

Kindly let me know is this dump valid in India..??

Borgie

Wednesday, March 04, 2015 6:25 PM UT

Passed. Dump still valid.

Did a lot of homework by building my one homelab. And read a lot on the Citrix support site.

My advise, read the comment from Mike (20 Feb). It can help you. I did it after :-)

xiao

Wednesday, March 04, 2015 4:46 PM UT

I am going to take exam 1Y0-200 this weekend and I don't have an experience to use SIMs. Could someone give me some instruction how to use Sims in the exam? What I need to be becareful to use SIMs during the exam?

Very appreciate!

Xiao

My name

Wednesday, March 04, 2015 12:35 PM UT

Hello, Max.

Ensure members of the Finance user group have access to Microsoft Office 2013 as stated in the scenario.

How do you ensure task 2? You only have a PVS console.. There is no Studio window in the SIM.
A: Users access Desktops, which are provisioned and use the Finance vDisk. Considering that, updating the vDisk with Office 2013 is enough to make Users have access to it. You only need to assure all the devices are configured to get the Production version of the vDisk

max

Tuesday, March 03, 2015 3:03 PM UT

As for the "merge vdisk" questions, the SIM states..

Tasks:

1. Merge all updates to the vDisk.

Is it "merged updates" or "merged base" ?

2. Ensure members of the Finance user group have access to Microsoft Office 2013 as stated in the scenario.

How do you ensure task 2? You only have a PVS console.. There is no Studio window in the SIM.

subbu

Sunday, March 01, 2015 4:13 AM UT

subramanian.as1984@gmail.com

Muhammad

Saturday, February 28, 2015 7:18 PM UT

Dump about 95% valid - the question about VHD, AVHD, and PVP only allowed TWO not THREE selections.

Simulations are as Mike described and tripped me up as Sung as well

Would be good if there were videos of the simulations

citrix

Saturday, February 28, 2015 2:11 PM UT

dtp123:
"Q) as per simlation they ask to create three VMs from XXXX04 to XXXX06. So i use XD Creation wizard to create VM, But how to give VM name as XXXX04 because if i use 0# on same suffix it create VM from XXXX01. Please explain."

Ans: in the sim the servers Appserver001, Appserver002 and Appserver003 exist. Therefore the next server can created with the schema: Appserver## : it beginns Appserver04-06.

Joe(gnoe)

Friday, February 27, 2015 4:17 PM UT

Still Valid. Passed today. I retook the exam.

Got 66 questions and 6 sims. Sims were the same as last time.
Got 3 new questions drag and drop: see the questions Sung jin Kang described.
TIP: read the questions carefully. Some questions are slight different.
Have some hand on trianing setting up a lab!!
Before finalize one sim explore all options. It simplifies the answer.

Good luck.

jay

Friday, February 27, 2015 3:56 PM UT

Did anyone else experience not being able to view nothing other than Provisioning services for the simulation questions, I don't remember seeing studio?

Rotor

Friday, February 27, 2015 6:54 AM UT

Anybody retake this exam?
If yes, did you get the same sims?

Citrix2

Thursday, February 26, 2015 1:17 PM UT

I failed today

question tpo pvs-simulations:
when the 3 pvs simulations come, is it than right, that only the PVS Console in this LAB is open, you can open no Studio or so, is that correct???

STA Sim:
Manage Delivery Controller
Add Controller-1 with HTTPS 8080 right?
Change base URL also to :8080?

Jimmy

Thursday, February 26, 2015 9:42 AM UT

Failed with 64. I believe I did almost perfect in multiple questions, I believe I loose all the points in Simulation.
I did as Mike done in the exam yesterday.

I think it can be XD Creation wizard for 4 machines and Streamed Creation Wizard for 3 machines.
What do you think?

1.PVS Simulation - XD Creation Wizard (3 machines, assign to a OU and to a specific Machine Catalog)

2. PVS Simulation - Streamed Creation Wizard ( Create 4 machines, assign to a specific device collection)

SUNG JIN KANG

Wednesday, February 25, 2015 11:19 AM UT

Please let me know the right Answer

SUNG JIN KANG

Wednesday, February 25, 2015 11:17 AM UT

Question
A Citrix Administrator updates a vDisk assingned to a group of pooled desktops.
Which steps must the administrator take to ensure that the updated vDisk is associated with the pooled desktops?(choose one)
A. Update the vDisk's inventory
B. Promote the vDisk to production
C. Place the vDisk into private image mode
D. Recreate the pooled desktops associated with the vDisk

Sung jin Kang

Wednesday, February 25, 2015 11:10 AM UT

Fail 64 point
Question
A Citrix Administrator creates a backup schedule that will back up all of the available vDisks.
Which two critical file types must to be added to the backup schedule?(Choose two)
A.BAK
B.PVP
C.VHD
D.LOK
E.AVHD

Tom

Wednesday, February 25, 2015 10:05 AM UT

For those of you who took the exam the second time. Are the questions and sims different? So can i study this VCE some more or isn't it valid anymore? Hope someone can help me.

Citrix01

Tuesday, February 24, 2015 2:13 PM UT

Still Valid.
All Simulations as Described in the Posts, with the Additional Questions regarding the mentioned update VDisk and Processing of Policies drag and drop. Some QUestions just changed the amount of Answers, just read carefully and learn why the answers are correct and you will be safe.

Max

Tuesday, February 24, 2015 11:21 AM UT

Just failed the exam with just a few percentages...
The Sims count very hard.

I ran in the same naming scheme trouble as dtp123.
What´s the trick here?

dtp123:
"Q) as per simlation they ask to create three VMs from XXXX04 to XXXX06. So i use XD Creation wizard to create VM, But how to give VM name as XXXX04 because if i use 0# on same suffix it create VM from XXXX01. Please explain."

You shoud use the streaming wizard in this question right? Mike states an IP for the hypervisor, well you can´t. There is no IP given for the hypervisor!, only a DC is given. So you can only use Xendesktop wizard. In the Xendesktop wizard a DC is asked and hypervisor username and password. I haven´t used streaming setup at all.

Also, how to assign merged vdisk to a group? (merged vdisk question?)

Gag

Monday, February 23, 2015 11:14 AM UT

Hi Mike, how to verify what you stated below.

3. Ensure the target devices are configured to meet the requirements outlined in the scenario

* User Groups - Confirm HR User Group are assigned the vdisk

Mike

Friday, February 20, 2015 3:09 PM UT

I've compiled the following information as to how to complete the 6 sims. I'll be taking this exam next week. Can anybody comment on whether this looks right or wrong?

1. StoreFront Add DC as STA - Simluation
* Tasks
*
1. Modify the store named Apps and Desktops to provide users with access to desktop OS machines and server OS hosted applications using hostnames only. Do NOT assume the FQDN.

* Stores - Apps and Desktops - Manage Delivery Controllers - Edit Delivery Controllers: Add - Contoller1, XenDesktop, Add - Controller1
* Authentication - Add/Remove Methods - Pass-through NetScaler Gateway
* Stores - Apps and Desktops - Enable Remote Access: No VPN Tunnel, Add etScaler Gateway, set Default Appliance?

2. Ensure communication with the Delivery Controllers take place over port 8080.

* Stores - Apps and Desktops - Manage Delivery Controllers - Edit Delivery Controllers: HTTPS and 8080
* Server Group - Change Base URL: Rename to HTTPS and add 8080 after FQDN

3. Set up Controller-1 as the Secure Ticket Authority

* Netscaler Gateway - Change Store? - Secure Ticket Authority: HTTPS://Controller-1:8080

* Add a specific DC to a store and use that DC as STA using 8080 port. Also dont forget specified 8080 port on STA URL (https://server.domain.com:8080/..../ctxsta.dll), also set "Enable Remote Access" selecting "No VPN Tunnel"

2. Citrix Studio - Update server OS and distribute application - Simulation
* Tasks
*
1. Update the Windows 2012 Servers machine catalog to meet the requirements outlined in the scenario.

* Machine Groups - Update Machines - Next - Select Snapshot or VM - Rollout Strategy
* Delivery Group - Windows 2012 Hosted Desktops and Applications - Add Applications - Next - Checkbox Mozilla Firefox - Next - Finish

3. StoreFront Add XenDesktop infrastructure to existing Store - Simulation
* Tasks
*
1. Configure StoreFront to integrate Xirtic's environment into the CCH environment

* Stores (in CCH) - Choose Existing Store - Manage Delivery Controllers - Add - Display Name: Xirtic, Add Server Name: XRT01, Transport Type: HTTP, Port: 80

2. Configure user access to meet the requirements outlined in the scenario.

* Authentication - Add/Remove Authentication Methods - User Name and Password, Domain Pass-through
* Authentication - Configure Trusted Domains - Trusted domains only - Add: domain, Default Domain: ??

4. Provisioning Services Console - Windows 8 Computer for HR
* Tasks
*
1. Create a device collection names HR

* Device Collections: Right Click - Create Device Collection - Name: HR

2. Create four target devices named Win801, Win802, Win803, and Win804, and add the target devices to the HR device collection

* CCHSite: Right Click - Streamed VM Setup Wizard - Citrix XenServer - Hypervisor: 192.168.10.5, Username: root, Password: Password1 - Select VM Template: Windows 8? - Shared vDisk: CCH_Win8, Select DeviceCollection: HR - Number of VMs: 4 - Create new AD Computer Accounts - OU: HR, Account Naming Scheme: Win8##

3. Ensure the target devices are configured to meet the requirements outlined in the scenario

* User Groups - Confirm HR User Group are assigned the vdisk

5. Provisioning Services Console - Merge vDisk
* Task
*
1. Merge all updates to the vDisk

* vDisk Update Management - vDisk: Right Click - Versions - Merge - Merge Updates, Merge Version Access: Production
* Delete Previous Versions except Base.

2. Ensure members of the Finance user group have access to Microsoft Office 2013 as stated in the scanario

* Device Collection - Check all VMs are Production Type

3. Complete the tasks that are necessary to meet the requirements outlines in the scenario.

* User Groups - Confirm Finance User Group are assigned the vDisk

6. Provisioning Services Console - AppServers Server 2012
* Task
*
1. Create three target devices named AppServer04, AppServer05, and AppServer06, respectively.

* CCHSite: Right Click - XenDesktop Setup Wizard - Controller Address: Controller-1 - vDisk: ServerOS2012 - Use an existing catalog: Server 2012 - Number of virtual machines to create: 3 - Active Directory: Create Accounts - OU: Server OS Machines, Accounting naming scheme: AppServer##

2. Ensure the target devices are configured according to the requirements outlined in the scenario.

Guru

Tuesday, January 20, 2015 4:23 AM UT

I agrees with Andres. Please please please expalin Storefront sims as it is very confusive.
People who will take a test and pass, please share your answer with detailed description.
Thanks

Andres

Monday, January 12, 2015 7:54 PM UT

Failed at 64%... I will said that 70% of the question are ok, rest are not..
can somone please explain the SToreFront Sim, step by step.. it´s almost impossible to get..
rest of the simu are not that hard..

vect

Tuesday, January 06, 2015 7:40 PM UT

For the lab STA, I think is http://controler1:8080/.. and in the store, put the port 8080 http

dtp123

Monday, December 22, 2014 11:09 AM UT

I have few question with simulation question

1.PVS Simulation - XD Creation Wizard (3 machines, assign to a OU and to a specific Machine Catalog)

Q) as per simlation they ask to create three VMs from XXXX04 to XXXX06. So i use XD Creation wizard to create VM, But how to give VM name as XXXX04 because if i use 0# on same suffix it create VM from XXXX01. Please explain.

4. StoreFront Sim - Add a specific DC to a store and use that DC as STA using 8080 port. Also dont forget specified 8080 port on STA URL (https://server.domain.com:8080/..../ctxsta.dll), also set "Enable Remote Access" selecting "No VPN Tunnel"

Q) As per Simlation i have added new Controler to existing Store. But while add contoler the HTTPS port select as 80 not 443. Do i need to change?

5. StoreFront Sim - There are 2 domains CCH and Xirtic. First add an additional DC (I used the existing store and add Xirtic Controller) to a Store and manage authentication methods (User Name and Passoword and Passthrough from Netscaler Gateway). Add Xirtic domain to “Configure Trusted Domains. Also you have to change “Display Name” using Xirtic.

Q) Simlation steps say use exiting Store or create new store. Which is best option. On Existing Store CCH controler already exist.

6. Citrix Studio Sim - Update machine catalog template vDisk + update Delivery Group, Also you have to publish Firefox using “Create Application”.

Q) i update the catalog and set update on next reboot. How to update Deliver Group.

dtp123

Tuesday, December 16, 2014 8:57 AM UT

Failed at 58%... This VCE is correct for 80/90% but some answer are wrong. simulator is bit confuse with question

Helmut

Thursday, December 11, 2014 11:06 AM UT

Valid in Switzerland, 76% today.

The chosen one.

Friday, November 28, 2014 3:40 PM UT

Passed in Mexico with 74% here are my findings:
-it came 66 questions section including 2 drag and drop questions. All the questions came from this dump I think 90% of the questions of this dump are correct.So it's safe to say that you can use this dump to present the exam.
-the drag and drop question were as follow.
A.put the steps to update a vdisk in the correct order I ordered it as follows
1.update the master image.
2.shutdown the master image
3.run the pvs inventory.
4.don't remember here, but it was in the last
B.When using profile management what is the order in which the policies are proccessed.. I did it as follows
1.local computer
2..ini file
3.citrix studio policies.
4.group policy.
It came a seccion of 6 similuations as has been told for other students. here is how I answered.
1. Citrix Studio Sim - Update machine catalog, this was simple, go to machine catalogue, select the catalogue that needs to be updated , click on update machines, follow the instructions of the wizard.
2. PVS Simulation - XD Creation Wizard this is pretty simple go to the pvs console, right click on sites, select xen desktop wizard, then follow the instructions acordingly to what was requested in the scenario (3 machines, assign to a OU and to a specific Machine Catalog),
3. PVS Simulation - Streamed Creation Wizard, this is quite simple too, go to the pvs console, right click on sites, select Streamed creation wizard, then follow the instructions acordingly to what was requested in the scenario ( Create 4 machines, assign to a specific device collection)
4. PVS Simulation - Vdisk management, this was hard, I did more or less what John Smith did (First merge updates and then assign to a specific machines), Use "Merged Updates – All updates from last base" and set merge version to "Production". Dont forget delete previous versions, unless base. Check that all VMs on Device Collection has Production.
5. StoreFront Sim -this was pretty hard, I did kind the same of what John Smith did , There are 2 domains CCH and Xirtic. First add an additional DC (I used the existing store and add Xirtic Controller) to a Store and manage authentication methods (User Name and Password and Passthrough from Netscaler Gateway). Add Xirtic domain to “Configure Trusted Domains. Also you have to change “Display Name” using Xirtic.
6. StoreFront Sim - this was the hardest of all , I confirmed what John Smith did, Add a specific DC to a store and use that DC as STA using 8080 port. Also dont forget specified 8080 port on STA URL (https://server.domain.com:8080/..../ctxsta.dll), also set "Enable Remote Access" selecting "No VPN Tunnel"
btw, the first secction has the 6 simulations, then the section 2 has the 66 questions, when you were done with the secction 1 and you were working on the section 2 you won't be able to come back to the secction 1.
Conclusion, the dump is good, I just answered 2 questions according to my experience. there are 3 simulations very easy. and 3 tough, so focus on the store front related.

John Smith

Wednesday, November 26, 2014 10:04 PM UT

1. PVS Simulation - XD Creation Wizard (3 machines, assign to a OU and to a specific Machine Catalog)

2. PVS Simulation - Streamed Creation Wizard ( Create 4 machines, assign to a specific device collection)

3. PVS Simulation - Vdisk management (First merge updates and then assign to a specific machines), Use "Merged Updates – All updates from last base" and set merge version to "Production". Dont forget delete previous versions, unless base. Check that all VMs on Device Collection has Production.

4. StoreFront Sim - Add a specific DC to a store and use that DC as STA using 8080 port. Also dont forget specified 8080 port on STA URL (https://server.domain.com:8080/..../ctxsta.dll), also set "Enable Remote Access" selecting "No VPN Tunnel"

5. StoreFront Sim - There are 2 domains CCH and Xirtic. First add an additional DC (I used the existing store and add Xirtic Controller) to a Store and manage authentication methods (User Name and Passoword and Passthrough from Netscaler Gateway). Add Xirtic domain to “Configure Trusted Domains. Also you have to change “Display Name” using Xirtic.

6. Citrix Studio Sim - Update machine catalog template vDisk + update Delivery Group, Also you have to publish Firefox using “Create Application”.

before you do anything read carefully several times.

Also dont do many clics unnecessary with the mouse, reset sim as necessary.

Hi

Monday, November 17, 2014 12:45 AM UT

Hi guys, still valid?

David

Thursday, October 30, 2014 8:37 PM UT

Passed exam today, 68%
Simulations as Follow:
1. PVS Simulation - XD Creation Wizard (3 machines, assign to a OU and to a specific Machine Catalog)
2. PVS Simulation - Streamed Creation Wizard ( Create 4 machines, assign to a specific device collection)
3. PVS Simulation - Vdisk management( merge updates and assign to a specific machines)
4. StoreFront Sim - Add a specific DC to a store and use that DC as STA.
5. StoreFront Sim - Add a additional DC toa Store and manage authentication methods.
6. Citrix Studio Sim - Update machine catalog template vDisk + update Delivery Group.

The Dump is valid but in many questions the method are wrong (single answer vs multiple answer). Good Luck.

John

Thursday, October 09, 2014 11:20 AM UT

Passed exam today, 76%.
All questions in the VCE are asked on the exam. If all the answers are valid, not sure, but probably yes.
NOTE: Q110, is not one answer. It is needed to select two on the exam. Not sure, I selected the first two.

Labs:
- Do know PVS and Storefront well. 5 labs on these.
- 1 update MC and host Mozilla Firefox application.

zoph

Monday, September 22, 2014 2:54 PM UT

Failed at 63%... This VCE is correct for 80/90% but some questions are wrong (wrong number of checkbox) example : Question about VHD, AVHD and PVP, only 2 answers required.

2 or 3 new questions that are not in this VCE. (drag and drop questions)

Simulations are hard if you don't know the product. Good luck. Learning this VCE is not enough to pass this Certification.

YAWNAbe

Monday, September 22, 2014 9:52 AM UT

Freddy can you share the sims you got?

Freddy

Thursday, September 18, 2014 7:00 PM UT

Failed today with 53%, simulations are rough, even though I have not studied much I did the self paced training course within the citrix website but the simulations are more difficult than the course labs. Good Luck.

Falseclock

Monday, September 15, 2014 8:10 AM UT

What is simulation? How it looks like?

jimmy

Monday, September 15, 2014 7:04 AM UT

Here are the sims whcih are given below. You really can't give answers to the sims because it's a simulation. Just do the following in a home lab.

Can anyone point me in the right direction, in the exam for the streamed wiz sim i was not given a xenserver ip address. Where can this information be found inside the PVS console?

3 sims PVS (create client OS with XD wiz, create server OS with streamed wiz and merge vdisk versions,
2 sims SF (add and modify store)
1 sim update maschine catalog an build new DG)

Jebaraj

Saturday, September 13, 2014 7:42 PM UT

Could you please share the simulations. Where to find..