Microsoft.Surepass.70-662.v2012-05-19.by.binary.181q.vce

nick

Monday, October 01, 2012 1:27 PM UT

I just passed the exam this afternoon, 80% of questions are from dump.

Joe

Wednesday, August 08, 2012 10:26 AM UT

Congrats Humpty Dumpty :)
I'll take the exam tomorrow. I think the dump points the right answer for admin delegation. There are predefined administrative roles and you can delegate the using the wizard mentioned in this document :
http://www.msexchange.org/articles/understanding-exchange-access-control-administrative-delegation.html

Humpty Dumpty

Monday, August 06, 2012 11:09 AM UT

OK, just got done taking this - passed with 836. About 15 or so new questions not in this, OtherPeoplesPoo, or Fibers dumps. With the questions that I was in doubt with here, I went with my gut and what I thought was the correct answer. If you use Exchange everyday and have done most stuff, you should be ok.

Humpty Dumpty

Monday, August 06, 2012 6:53 AM UT

Exam A there is a question: You have a hosted Exchange Org. All servers in the Org have Exchange 2010Sp1 installed. You need to group a set of users for administrative delegatation. What should you create? Answer in dump is D: A new role assignment. I disagree and think it should be B: A new management role. It is not asking to link users to policies its asking to group users together.
http://technet.microsoft.com/en-us/library/dd638105.aspx

Joe

Sunday, August 05, 2012 11:06 PM UT

Exam E, Q22 says that the answer is A.
But there is not NTLM authentication option for EAS virtual directory authentication, is there? So how could that be the answer?

Joe

Saturday, August 04, 2012 9:48 PM UT

As for Exam B, Q24,
You are looking for suggestions. I think the answer is C. Check this out :
http://smtp25.blogspot.com/2009/06/text-message-notification-exchange-2010.html

Joe

Friday, August 03, 2012 4:31 PM UT

Thanks,
How about Exam E, Q4

Don't we setup relay permissions through recieve connectors? A hub transport rule would work after the mail is accepted. I didn't actually understand the wording in the question :)

Humpty Dumpty

Thursday, August 02, 2012 9:25 PM UT

@Joe, last thing; it wouldn't be set-mailboxdatabase because the question doesn't say you have multiple databases or mailbox servers.

Humpty Dumpty

Thursday, August 02, 2012 9:22 PM UT

@ Joe, I think the answer is remove-publicfolder. The Dump references this: http://technet.microsoft.com/en-us/library/dd876883.aspx but the answer doesn't reflect Step 1; the dump just goes to Step 4 as the answer which is remove-publicfolderdatabase. So I think the answer should be B: But that's just my thoughts.

Joe

Thursday, August 02, 2012 10:39 AM UT

Exam E, Q3

What kind of a question is this? How do we approach to those?

"Server1 holds a public folder database, witch command do you use first to remove the public folder database?"

What if the PFDB is assigned to the mailbox databases?
vce says that correct answer is "Remove-PublicFolderDatabase"
But can anyone verify that the correct answer is as vce suggests, or is it "Set-MailboxDatabe" which is among the options..

OtherPeoplesPoo

Monday, July 30, 2012 3:15 PM UT

Used AnotherInbox, Majd Salha, Fiber, and Binary and got over 930 in the UK a couple of weeks back.

I got fed up with reading duplicate questions with incorrect wording, so put all the exams above together in one file, with the duplicates removed. I also added 6 new questions.

I have uploaded this file and it is called: Microsoft.SurePass.70-662.v2012-07-19.by.OtherPeoples.393q.vce

Please use that one as I know it is 100% valid.

Good luck and a massive thanks to AnotherInbox, Majd Salha, Fiber, and Binary!!

Humpty Dumpty

Monday, July 30, 2012 2:39 PM UT

@ Lucas and @Muddywaterz
Thanks for the input - I'm sitting this next Monday and want to double check everything - nobody likes to fail!

Lucas

Monday, July 30, 2012 10:48 AM UT

Humpty Dumpty. Your answer about exam A, question 2 that refers to Outlook 2003 clients updating to OUtlook 2010, is good, but I think isn't correct, because the question says "You need to remove all of the public folders from Ex1" . To remove only de public folder (not database), you don't need make changes in OAB, only delete Folders in Database.

Another thing would be if the question was "you need to delete the public folder and DATABASE" then you are rigth. I believe that it is a trick question. I have doubts. I do not know what could be

Muddywaterz

Sunday, July 29, 2012 1:49 PM UT

Humpty Dumpty, think the answer in the dump (Exam D Q21) is correct.

See the below link:

http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/050fecb3-206f-4b73-b9be-40b2bae58e23/

Humpty Dumpty

Sunday, July 29, 2012 12:18 PM UT

Anyone have any thoughts on Exam F the question regarding a Distribution Group named Group 1, and the user named User1 who needs to add/remove members while preventing User1 from modifying all other groups. The answer in the Dump is A:. I think it's D: I've run in to this in production before and adding the user to "Managed By" didn't work. I had to do this: http://blogs.technet.com/b/exchange/archive/2009/11/18/3408844.aspx

Humpty Dumpty

Saturday, July 28, 2012 7:29 PM UT

Exam D - Question how to disable Public Folders in OWA. The answer in the exam here is A: Use the EMC to create a new OWA Mailbox Policy and what it should be is C: Modify the Segmentation settingsof the OWA Virtual Directory.
http://www.msexchange.org/articles_tutorials/exchange-server-2007/security-message-hygiene/outlook-web-access-security-features-part3.html

Humpty Dumpty

Saturday, July 28, 2012 6:56 PM UT

I wouldn't trust all these answer are correct - check them. Exam D has a question about ensuring Server1 being able to send and receive email from Server 3 and to ensure Server 3 can get updated Exchange recepients. What ports need opening on the Firewall? It has Inbound and outbound port 25 - I agree with inbound not too sure about the Outbound as by default all traffic is permitted out - but what is definitely incorrect is the LDAPs Port. Answer is port 636 E: and not G:50636.

Willy

Saturday, July 28, 2012 6:40 PM UT

I passed this exam yesterday with 821. Studied the binary181 and fiber342 (a lot of duplicate Qs through and overlap). All of the Qs on exam where from these two dumps (yet slightly reworded) and around 4-5 new questions that were not too difficult. Several Powershell Qs for CAS/HUB/TRANSPORT and a focus on the ORG or Server level.

John Honda

Saturday, July 28, 2012 5:43 PM UT

I know exchange fairly well, and passed, but for exam prep, I only studied this dump. About 1/2 the questions on test were not I. This dump.

MrX

Saturday, July 28, 2012 12:11 AM UT

United States
passed with 723. Used this and Fibre. I HIGHLY recommend studying BOTH. I was about to take the test with ONLY this dump, and the day of the test I studied the Fibre one quickly and about 1/3 of the questions were on that one.

One other note - alot of the questions are on here but REWORDED differently OR give the same answer but slightly different wording. So you have to spend time.

certjunkie

Thursday, July 26, 2012 12:58 AM UT

I passed today with 823. Exam had 55 questions. I studied this dump and fiber 342 only. There were a few questions not covered in the dumps. You will need to study both to pass. Good luck!

Humpty Dumpty

Wednesday, July 25, 2012 6:04 PM UT

There is a question in Exam A on this dump that refers to Outlook 2003 clients updating to OUtlook 2010 - and what is the first thing to do. The answer in the dump is Delete the Public FOlder DB, but this is wrong. The first thing you should do is change the OAB Distribution Points. If you delete the PFs first (which I doubt Exchange would let you do) you will have loads of issues as Outlook 2003 gets it Free+BUsy etc fromPublic Folders.

Rami kilani

Tuesday, July 24, 2012 11:45 PM UT

hi all,
i have just passed the exam with 823/1000 , i studied the binary181 and fiber 342 i had 6 to 7 new questions. but most of te question where from those two dumps.
thank you

None

Monday, July 23, 2012 4:53 PM UT

I´m checking this VCE because I failed the test today. The first 3 question I´m looking into, the answers are wrong. This VCE needs an update.

The question where you need to be sure that users create new public folders on server4 only has wrong answers. Someone put the following comment in the answer:

"Mailbox features???"

I´ve got this question today on the exam and the answer is:
Mailbox database. Not mailbox features.

The question where it asks to install the pre-requisites, the answer is wrong to. It doesn´t mention to actually install the roles. Why would the answer be "exchange-typical.xml"?

I´ve done this VCE and I passed the VCE with 100%, but failed the exam today. We need an update..

Flavio

Monday, July 23, 2012 4:41 PM UT

Failed 692.

15 or 20f news Questions

test

Monday, July 23, 2012 2:06 PM UT

failed the exam got 682 not all questions are from this dump so dont rely on them

None

Monday, July 23, 2012 1:54 PM UT

Failed the exam today. Most questions seems to be on this exam but I doubt if there all correct. Maybe 7/8 question that´s not on this dump (55 total).

ai

Saturday, July 21, 2012 4:45 PM UT

Canada
I studied ~2 months this with Fiber 324q, Microsoft book, labs from the book
Passed 840
Aprox 5-7 new questions
Working full time, no family

Tom

Friday, July 20, 2012 3:46 PM UT

Agree with last comment. Both fiber and binary are both very accurate. Passed today using just these dumps. The test included maybe 5 new questions and a couple of old questions asked in a different way

craziola

Friday, July 20, 2012 1:54 PM UT

This dump is super valid. I studied this with Fiber 324q. Passed with only 2 questions wrong. No new question and 100% from these dumps. Good luck guys.

Showkat Hossain

Thursday, July 19, 2012 10:18 PM UT

From Saskatchewan

I passed today with 805. I studied this dump plus fiber 342.
Good luck!

unknown UK

Wednesday, July 18, 2012 2:35 PM UT

passed today 870 studied this dump only
maybe 6 questions not seen before but what you learn stdying should get you through

chico

Wednesday, July 18, 2012 12:29 PM UT

passed 805. needs understanding off qns do not copy answrs but try to understand

EX2010

Tuesday, July 17, 2012 4:54 PM UT

Passed with 721 in India. Most questions(except 10 or 12) are from this dump!! Learn this dumps well you can pass!!

techtiger

Tuesday, July 17, 2012 11:37 AM UT

Passed the exam with 752/1000. Dumbs are valid i must say. :)

prydz

Tuesday, July 17, 2012 10:15 AM UT

I passed today with 717 :-)

On the test there was many questions of this dump (abaut 70-80%)

Thank's for this dump

chico

Tuesday, July 17, 2012 6:48 AM UT

am going to write exam tomorrow, please any suggestion? Also is binary enough to pass?

RICHTO

Monday, July 16, 2012 11:34 PM UT

Exam C, Q14 should be answer A I think.

RICHTO

Monday, July 16, 2012 9:56 PM UT

Exam 2, Q9 seems to be wrong. Legal hold doesnt have a configurable retention period. Suspect this should be E/F

noon

Monday, July 16, 2012 7:57 PM UT

i passed today thair is many new qut BUT if you have some info from exchange you will pass

strange44

Monday, July 16, 2012 12:13 AM UT

hello suzy

can you please tell if you study this dumb only or use another one also?

Thanks

susy

Sunday, July 15, 2012 7:13 PM UT

I passed a hour ago. eeehhhhh 792!!! thank you !!!

fred

Friday, July 13, 2012 9:01 AM UT

dump still valid - I passed today in france - score 752!! thinks Binary..

Manjula

Tuesday, July 10, 2012 10:56 AM UT

i passed today. score 788. but about 5-8 questions out of dump. will need light knowledge of exchange to got-through this

dipu_boy

Monday, July 09, 2012 2:51 PM UT

Tanagorn or someone, is this exam (181questions) enough? or do you need to study this VCE plus the fiber (342questions)?

Tanagorn

Monday, July 09, 2012 10:12 AM UT

I pass 750/1000 .Thailand

KGB

Saturday, July 07, 2012 7:16 PM UT

Mauricio
Congrats Glad to hear fiber and binary is valid. you stated you found explanation of the answers. could you update file and upload. I know it would help many.

Mauricio

Wednesday, July 04, 2012 8:32 PM UT

This exam is valid, I study fiber 342Q and Binary181Q.
I pass 911/1000, new 3 questions. Take care. Good Look

buyer05

Tuesday, July 03, 2012 1:08 PM UT

this dump is valid. i passed and got 805 score. i just study binary and fiber. goodluck and thank you binary and fiber. 3-5 questions are not on this dump. you can do it too. :)

Mauricio

Tuesday, July 03, 2012 1:30 AM UT

I'm studying for these tests:
Binay 181q, 342q Fiber
I have the exam on July 4, apparently the responses of these tests are correct. I Locate the explanation of each online

azhek

Saturday, June 30, 2012 9:21 AM UT

Passed 29-06-2012 788/1000

The dump is valid but you still need real exchange 2010 knowledge to pass the exam

Wiki Lks

Friday, June 29, 2012 6:25 PM UT

This dump is still very valid - took the exam today and passed - 823/1000

I studied: Binay 181q, Fiber 342q, and also Combined266q.
A few question variations.

haker

Thursday, June 28, 2012 6:15 PM UT

j faill todey with 504 because j dont study hard for the exame, only feew hours before exame. the exam was easy, moust of the questions were from this dump and 420 but mixed and feew new. if you study hard jou will pass for schure. good luck.

muftarov

Tuesday, June 26, 2012 4:54 PM UT

I passed today.. barely, 735/1000! The exam was not so hard btw , if u study little bit harder u will surely pass.60 to 70% questions were from this dump 5 or 6 were new and the other were from fiber 342q .Be carefull the questions were mixxed up a litle so concentrate on the isssue of the question not the order!Good Luck!

cleverdash

Monday, June 25, 2012 5:20 PM UT

Dump still valid - took the exam today and was able to passed it - 841/1000

Binay 181q, Fiber 342q, MajdSalha 420q and Combined15q

Thank you Guys! Goodluck!

nn22

Monday, June 25, 2012 3:49 PM UT

Passed the exam today..studied this dump and fiber (342 q).3 or 4 questions were new..if you study the dumps you can pass..thanks n al d best guys

Qexam

Friday, June 22, 2012 3:26 PM UT

Agree with TemplarOD
Valid, passed today 800 i just study this 180q. Thank you so much
Around 6-8 new question. If you have 100% remember 180q. You must pass.

Steve

Friday, June 22, 2012 11:53 AM UT

Hi Ayman, One question.Did you used this dump alone or some other dumps.

Ayman

Wednesday, June 20, 2012 12:53 PM UT

Passed Today 735/1000. just use this dump, around 15 new questions . take care Guys.

Foghorn Leghorn

Wednesday, June 20, 2012 7:49 AM UT

Good morning all,
Passed 70-662 exam yesterday with 788. There are many new questions. I used this dump and Fiber's (Also the technet articles and the exam kit). The explanations and screenshots are really usefull! Like every Microsoft exam you'll have to read carefully!
Thanks alot!

Aleksandar

Wednesday, June 20, 2012 1:11 AM UT

Passed today with +800 :)
i got around 20 questions from this dump,10-5 questions were modified from this dump and got around 15-20 new questions !!!

I used binary 15q, binary 181q, Fiber 342q & MajdSalha 420q

@TemplarOD what time you start with the exam in 13:00 ??? :)

TemplarOD

Tuesday, June 19, 2012 4:35 PM UT

Valid, passed today 800+ .
Very easy exam, just study this 180q. Thanks.
I studied only 3 days. First time with Exchange.

ree

Monday, June 18, 2012 1:17 PM UT

the dump is not valid at least 20 new questions

Kamlesh

Monday, June 11, 2012 1:48 PM UT

I passed with 947/1000 score. About 5-6 questions were new. I referred to binary 181q, Fiber 342q & MajdSalha 420q and other short one 15q & 8q.

Good Luck guys..

Adam

Saturday, June 09, 2012 4:55 PM UT

Beware Guys, Just attended the exam a while back. Many questions are new (10 - 15) and many others are modified too (20). I managed to pass barely. (referred to Binary, Fiber and Majd dumps). Many answers/questions are slightly changed to confuse. Please practice in labs/hands-on to tackle the tricky questions. All the best from Asia-Pacific !

I have chosen "Moderate" in the MS Survey for exchange skill level questions before the exam.

binary

Saturday, June 09, 2012 12:33 PM UT

exam still valid, about 6 new questions, good luck everyone.

sdf

Friday, June 08, 2012 11:20 AM UT

Passed today, Studied this dump only. Understand the questions and answers in the dump, then you will pass. Thank you Binary!

binary

Wednesday, June 06, 2012 8:50 AM UT

wtf are they talking about? this dump is in English and they can't write English?

John

Wednesday, June 06, 2012 2:21 AM UT

@binary

What is the difference between your dumps (181q & 15q) & fiber's?

zzz

Tuesday, June 05, 2012 5:13 PM UT

@haker Which dumps did you study? How many new questions?

haker

Tuesday, June 05, 2012 2:08 PM UT

many new and changed exam questions in reality. a little questions from damps on the net. shame you microsoft. very dificullt questions and the tipe of ansswering on the questions are different in reality

Hamed Abdelraof

Monday, June 04, 2012 9:11 AM UT

valid in egypt
Passed score 778 there are about 14 new question

zooo

Saturday, June 02, 2012 7:06 AM UT

Very easy exam,some questions were different from this.

John

Friday, June 01, 2012 7:00 PM UT

Can anyone please advise on these 15 Q provieded by Mark?, not able to locate them?

Thanks

Prabakaran

Friday, June 01, 2012 6:00 PM UT

I passed the exam today. .totally 55 questions 2 questions only out of the dump.

dump is still valid..study fiber also.

all the best.

arwa

Friday, June 01, 2012 9:41 AM UT

In addition to my previous post, if you still have enough time to review.
I have found a good like the shows you the common powershell commands that came out during my exam. see link below.

http://social.technet.microsoft.com/wiki/contents/articles/1632.common-exchange-2010-cmdlets-en-us.aspx

arwa

Friday, June 01, 2012 9:27 AM UT

I barely passed with 717/1000 score. Thanks to all who shared their experiences in the exam. This is my second take, btw - FYI, I used Majdsalha 420q and binary 181q only.

There were around 10-15 new questions, but I can't remember them.
But one thing is for sure, a lot were questions related to power shell commands. My advise to those who have not taken the exam is to understand each cmdlets found in this dump (binary 181q) and surely will pass. e.g. New, Get, Set, Remove, etc. so understand it well as the dumps here lately are just 70% valid so memorizing them will not give you a guarantee to pass. unless majority will say 90% valid. don't get me wrong, this dump really helped me.

noble

Thursday, May 31, 2012 10:55 AM UT

This dump is still valid- passed in Poland
55 questions- few new (don't remember them)
I also studied 15 questions from Max
Good luck guys!

Anonymous

Thursday, May 31, 2012 1:27 AM UT

Passed but many new questions in Implementing High Availability and Recover. This dump is still valid.

Failed

Wednesday, May 30, 2012 11:04 AM UT

Failed today with 690. Not a single question from this dump or the one with over 300 questions.

Onside1

Wednesday, May 30, 2012 9:29 AM UT

@mason I don't no.

Many questions were about Powershell.
I thought the test had 64 questions but they had 55?

40 questions were about Powershell commands (monitoring and rights)

mason

Wednesday, May 30, 2012 8:11 AM UT

@onsite which dump is valid?

onside1

Wednesday, May 30, 2012 6:45 AM UT

Exam have 55Q yesterday.
This one is not valid, only some questions are come back from this one.

AnotherInbox

Tuesday, May 29, 2012 12:01 PM UT

@Mason, The answer is C. Here is the supporting information: http://exchangeserverpro.com/how-to-configure-a-relay-connector-for-exchange-server-2010

mason

Tuesday, May 29, 2012 10:13 AM UT

You deploy a Monitor Server srvApp1, you want that server so it can send notification mails to
administrator, through relay domain, which option should you use:

A: hub transport rule
B: send connector
C: receive connector
D: edge subscription
E: accepted domain
F: remote domain

what is the answer?

Nga from Vietnam

Tuesday, May 29, 2012 10:02 AM UT

passed with 964 today. Most question in this dump and few question in fiber 342q. Two new question:
1. You need to modify the external URL of the Exchange Contrl Panel (ECP) .

Which node should you select from the Exchange Management Console (EMC) to make the modification?

To answer, select the appropriate node in the answer area.
--different this dumb but my answer the same of this dumb.==> answer: Select Server Configuration --> Client Access. i am not sure it true

2. You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The SMTP domain for the organization is contoso.com.

You enable the Exchange anti-spam features.
You need to specify a quarantine mailbox for the Exchange organization.

What should you do?
answer: Use Exchange Management Shell, modify Content Filter Config

roger

Monday, May 28, 2012 2:29 PM UT

I mean - A - answer is :

roger

Monday, May 28, 2012 2:28 PM UT

exam B, Q10 - screen is OK (server referal cost) but I think right A is :
D not B !! ??

Yogesh Patel

Monday, May 28, 2012 12:41 PM UT

Passed with 805 last Saturday. Studied This, MajdSalha and fiber dump. Few new Questions. Most question from this dumps but they try to confuse you with Similar questions one by one with Different answer.My result could been different if i could Completed all this dumps.My suggestion is "If you don't have any experience in exchange then Read all three dumps and Completed the exam in 30 minutes that's the best way you pass the exam and not confused with similar questions and you cant be failed and If you have experience you can read this dumps and Passed easily.

AnotherInbox

Saturday, May 26, 2012 2:50 PM UT

Exam A, Q4, possibly has the wrong answer listed. We wouldn't need an authoritative domain. There are TWO Exchange Organizations. Contoso is the Authoritative one, not Fabrikam. We would do an Internal Relay to Fabrikam, as they need to use our hub transport servers. http://technet.microsoft.com/en-us/library/aa995975.aspx

Unless, anyone else thinks differently?

roger

Friday, May 25, 2012 10:46 AM UT

@ noble - yes

egg

Thursday, May 24, 2012 10:53 PM UT

OK...Congrats..but can you give us a clue on the new questions please????

Mel

Thursday, May 24, 2012 7:03 PM UT

Passed today barely, with 718. Studied 95% this and binary15q. I think fiber had a few questions which I should have studied more. I would say 4 new questions and 4-5 same questions with new answer options.

egg

Thursday, May 24, 2012 1:58 PM UT

@MisterChoc,

Congrats...

What were the new questions all about?

MisterChoc

Thursday, May 24, 2012 1:52 PM UT

today i passed the test with 850 points - i have learnd with this one and fibers.
with 3-4 new questions

mason

Thursday, May 24, 2012 10:54 AM UT

i am scheduling it on June, i am a bit worry.

noble

Thursday, May 24, 2012 10:12 AM UT

roger- I have exam in Poland next week. Have you booked your exam?

roger

Wednesday, May 23, 2012 4:44 PM UT

@ Unknown from Egypt - can you tell us how many Qs where from this dump ?
30% ? 60% ?
or from others ?

Unknown

Wednesday, May 23, 2012 2:09 PM UT

Failed yesterday only 628 , i used this and Magd and fiber there are many new question i don't see it in any dump here.after i finished the exam and before end exam to see result i was know that i'll pass with 700 or a few points bigger but it was shock to me. I'm very sad !

mason

Wednesday, May 23, 2012 12:39 PM UT

You have to use shell to disable text messaging on active sync.

the requirement here is to disable it on active sync ! not outlook web access !