Pass Your Microsoft 70-642 Exam Easy!

What's the answer here?
Q3. create new subnet for denver that fits the current range and doesn't overlap montreal.

A. 137.40.64.0/21
B. 137.40.64.0/19
C. 137.40.64.0/14
D. 137.40.64.0/16


Correct network will be 137.40.64.0-137.40.95.255
answer B

This dump is good.i pass with 769 today but i think it has some wrong answers.i got from 3-4 questions new

I did pass today, but barely (723) and I was scoring in the 80's and 90's with this dump. My fall back / second shot strategy would have been to study the Bruce dump. Either way, preparation for this was tough. Best of luck to all -- thank you to the authors.

This dump is good because i neva studied the dump complete and 10 questions i recognized during my 070-648 exam. The exam 648 consist of 640 and 642. I passed 640 with flying colors but 642 i only earned a mark of 454 so i fail the 648 exam.[:-((]
Better preparation next time for the exam. Lots of VPN questions. Performance data collection. Tons of DHCP and DNS.[:-bd]

_________________________
I added cool smileys to this message. if you don't see them go to: http://s.exps.me

how do I access global names in my intranet with SSL?

A) http://server:8080
B) https://server:8080
C) http://server:8080
D) https://server

hey everyone ,i wrote and failed,my problem is that i memorised,yes i admit ,i actually ddnt read enough.note that there were no ports questions asked,gud luck everyone

Yeah you know who has the answers, go here: http://www.google.com

Any 90%-100% valid dump for 70-642 ? Does somebody consolidate right answers? Time is critical for us..

Dump valid. Passed today. Got 4 new questions.

Passed. Vaild for Turkey. Study with Bruce. Some questions have wrong answer.

@Babar
Reply me :
Wsus client download,Cliet computers report successful installatoin of updates to server 1
Ans.From,Server1, modify the update Source and Proxy
or
From Server1, modify the update Files and Languages option

And what about this other question:

Your network contains a server named DC1 that has the DHCP Server server role installed.
DC1 has a DHCP scope for the 10.10.10.0/24 network ID.
You discover the following warning message in the Event Iog on DC1: "Scope, Scope1, is 98 percent full with only two IP addresses remaining."
You need to ensure that DC1 has enough IP addresses to assign to clients. The solution must not cause any IP conflicts.
What should you do?
A.
Restore the database from a backup.
B.
Configure name protection.
C.
Configure DHCP link layer-based filtering.
D.
Increase the database cleanup Interval.
E.
Configure a DHCP Relay Agent.
F.
Compact the database.
G.
Modify the start address.
H.
Reconcile the scope.

I think the answer is G --> "Modify the start address" but dump says D --> "Increase the database cleanup Interval"

Any help?

Does anybody know the Correct answer for this question:

Your network contains an Active Directory domain named contoso.com. The domain contains two sites named Site1 and Site2. The servers for the sites are configured as shown in the following table.

Server1 hosts a standard primary zone for contoso.com. Server2 hosts a secondary zone for contoso.com. You need to ensure that all DNS replication traffic between Server1 and Server2 is encrypted.
What should you do?
A.
On Server1, configure DNSSEC for the contoso.com zone.
B.
On Server1, convert the contoso.com zone to an Active Directory-integrated zone.
C.
On each server, create connection security rules.
D.
On each server, enable Encrypting File System (EFS) encryption for the contoso.com.dns file.

I've read in some places answer is B but in others is C. Please I will need someone's help coz I'm a bit confused and I'm doing this exam next monday.
Thanks to all for the comments and help!!

Dump still very valid here in Bangladesh. I passed yesterday with 838/1000. some 7 new questions. otherwise everything was same. Thanks to Rafaqat

The MCITP: Enterprise Administrator certification and the MCITP: Server Administrator certification will continue to be awarded until July 31, 2013. After July 31, 2013, these certifications will be retired, but the MCSA: Windows Server 2008 certification will remain in market.

If you are close to achieving an MCITP on Windows Server 2008, we encourage you to complete your certification, and then you can take advantage of a shorter path to upgrade your certification to the MCSE: Server Infrastructure certification or the MCSE: Desktop Infrastructure certification. By achieving multiple certifications, you show continued dedication to learning new skills and you increase your value to your organization.

dumps are still valid passed two day back with 795 marks

passed today 780 ,valid in South Africa

Check this question

Your network contains a server named Server1. Server1 has the DHCP server role installed and contains multiple scopes.

You restore the DHCP database and discover that the active IP address leases are not displayed. You need to ensure that all IP address leases are displayed.

What should you do?
A.Reconcile all of the scopes.
B.Run jetpack.exe dhcp.mdb temp.mdb.
C.Restart the DHCP Server service.
D.Authorize Server1.
Dump says C but i think the right answer is A.
Check this link.
http://support.microsoft.com/kb/173396

Studied this exam and received 84.8% Very Valid. I need to go and write 70-643. Where can we get proper exam preps as I see there is not very good results on the 70-643 on ExamCollection

this dump valid but answers invalid
بالعربي كدا الامتحان كاسئلة ممتاز لكن اجابات بعض هذه الاسئلة خاطئىة لذا وجب التنبيه

Guys , Please help me i have Exam after tomorrow and i shocked when i see this Words , what is mean , Please Help me
Answer : C
Correct answer(s) D

which one is Right

This dump does look good enough to pass the exam.

However, individuals who have sat the exam report there is roughly 10% WRONG answers (over 35 answers) in this dump and the same in the Nobuhiro dump.

If this is true please can we start LISTING incorrect answers from this dump and any NEW QUESTIONS as no one appears to have scored near the 1000 mark.

Plz confirm Correct Answer.

QA-14 Client1 to use a different DNS server than the other client computers on the network. What should you do?
1. Define a user class.
Or
2. Define a user class.

QA-20 Which command should you run on WKS1?
1. Route add -p 10.128.4.0/26 10.128.64.10
Or
2. Route add -p 10.128.4.0 mask 255.255.255.192 10.128.64.1

QC-19 You have an Active Directory-integrated DNS zone.

You install a Web server named Web1
1. Create an Alias (CNAME) resource
Or
2. Configure a GlobalNames zone and add a Host (A)

still valid, passed with 815, in czech republic.

Very valid in SA, passed scoring 900.
I studies this exam and bruce exam and went through CBT nugget videos.
There were around 3 new questions.
Note that i didn't get asked a single question involving ports.

Still valid in the Netherlands passed yesterday with 903.
2 new questions and one modified

still valid in SA passed with 746

Dump is valid.

@Crous7 I am learning the German questions at certbase.de and additionally the dumps by Anonymous and Rafaqat. If you know these two dumps (it's rather ONE dump) you will pass with more than 700.

Still valid but have little dangerous only got 723

Passed ,exam is still valid in SA ,few new questions.

@Korsar which other dumps do you recommend ?
Thank you

@Crous7 Yes, it's still valid. I have a certbase.de account and the questions there are in German, but they are one-on-one. E.g. question 20 (20 of 348) from this dump is the same, even the ipv4-address in this scenario!

Rafaqat, question 20 (20 of 348) is false; you have to use answer b. Please notice all.

Dump is valid in Thailand. Thanks alot.

What's the answer here?
Q3. create new subnet for denver that fits the current range and doesn't overlap montreal.

A. 137.40.64.0/21
B. 137.40.64.0/19
C. 137.40.64.0/14
D. 137.40.64.0/16

Dumps 100% valid , Thank you Rafaqat ... 4 new questions download Microsoft.passguide.70-642.v2013-03-27.by.Nobuhiro.376q.vce you can find new Questions

This dump is valid. Passed yesterday of 930 mark. 4 New question like denver subnet as mention here in thread. Good luck to others. Thanks on this and Nobohiru.

Dear Umair Javaid Khalid plz txt me or mail me i wanna to knw abt this exam .
(samadmemon29@gmail.com),(03332838998) Abdul Samad Here.. Thank you.

Still valid in Bulgaria, may be one new question about Denver network.

This dump is still valid in South Africa, i wrote and passed on 29/04/2013. Gud luck

Passed today with 953 score. i studied rafaqat-348q and only new question from nobuhiro-376q. Comments helped a lot . infact 6 to 7 questions were from the comments mentioned by Fayaz,umi and User. i got all the questions mentioned by User so thanks to him :)

This dump is 100 % valid i passed with 953 , the subent question is
10.0.11.1/13 and 10.0.12.1 /13 you have to choose subnet mask and that is
255.255.0.0 or 16 then both will communicate mean they are on the same subnet.

Thanks earnest for the missing question detail

Some New Question Collected from Comments

Q1. Name 3 ports for PPTP,

1723 (TCP and UDP) and protocol 47

Q2. Backup a file share server, you must be able to restore individual files. Volume c, disk drive, system files Volume d, vhd virtual drive, data files Volume e, disk drive, data files Volume f, vhd virtual drive, data files

choose two

a. custom backup volume d,e,f
b. custom backup volume c,e
c. custom backup volume c .
d. custom backup volume d,f
f. full server backup
g. custom backup c,d,e,f

Q3. create new subnet for denver that fits the current range and doesn't overlap montreal.

A. 137.40.64.0/21
B. 137.40.64.0/19
C. 137.40.64.0/14
D. 137.40.64.0/16

Q4. routing cache of physical network adapter, no arp as a choice.

clicked netsh (cause its almost allways netsh

Q5. you have 2 subnet >> subnet 1: 10.10.0.10/13 and default gateway:10.10.0.1/13 subnet 2: 10.12.0.10/13 and default gateway 10.12.0.1/13 what should you configure to let sub2 1 connect to sub2

the answer was to change SM for both subnets to 255.255.0.0
Q6. one of them was about mounting a backed up VHD image with Image imagex or device explorer


Q7.
Note: in Q315 computer specs was rearranged in test to be
: Computer 1 Computer 2
Computer 2 has the spcs of Computer 4
Computer 3 Computer 3
Computer 4 Computer 1
so the answer went to 2,3


Q8.
you need to mount a VHD file......, which tool is used? (same as Q357 but with different answers)
correct answer was

DiskPart

This dump still valid in Egypt I passed today 838 score. But there was nearly 5-6 new questions.

I was able to pass with 861. Dump was really. One thing is I never had the Denver question. The user JD mentioned the subset question was on there and yes you do have to know your ports. There were a few new questions but most of those referred to the dump questions so not too new. Thanks for the good dump!

Just passed the exam with 930.
Dump was very useful.

- one new question regarding the Denver subnet discussed by others in this comments area. Chose also /19 as answer.
- drag and drop question from Exam I, Q16 the IP addresses were changed
- Exam F, Q12 slightly modified and had to choose only 2 options. For E and F options you had "add DC1 (DC2) account to Event log readers group" so this option I have left out
- Exam C, Q23 - Same questions, completely other answer options. ipconfig.exe /renew option missing. Don't quite remember what I have chosen..
- Exam G, Q23 - answer was to modify the globalqueryblocklist wpad

Good luck to you all

Satchmo I understand you looking for the full question, here it goes:

All servers run windows 2008 R2. You deploy new server named Server1. You need to configure Server1 to provide central authentication for all dial-up connections and all VPN connections. What should you install on Server1.

A. Active Directory Lightweight Directory Services (AD LDS)
B. Active Directory Federated Services (AD FS)
C. Network Policy Server (NPS)
D. Routing and Remote Acess Service (RRAS)

The correct answer is C

Missing question :
The rest of the question is missing in the vce.

Your network contains an Active Directory forest. The forest contains the member servers configured as shown in the following table.

Server Name Server Configuration
VPN1 VPN Server
VPN2 VPN Server
Dial1 Dial-up-Server
Dial2 Dial-up-Server

All servers run Windows Server 2008 R2

What are they asking ???????

Thanks Ars.
Excellent answer
(In response to 7th Question needs reviewing)

exam passed. in this dump, there are some new questions in the dump hfeh.
there are some differences in response between the two dump. but both are valid.

Passed today 792/1000
3 New Q (1 Network related Q, IP address Changed in Q, about printer)

From Dump study all NPS related Questions, 2 VPN Q, 3 Drag and Drop (DNS Name Resolution; DHCP MAC Reservation; Data collector set)

Don't take risk...... Study all Q from the dump..Dump not 100 % sure

Thanks a lot Ars - for me that clears the confusion.

hello sachmo,
I am writing it concerning the multiple backup question.
Note: http://technet.microsoft.com/en-us/library/cc753528.aspx

7th Question needs reviewing

Your network contains a server that runs Windows Server 2008 R2.

You need to schedule backups of the server. The solution must ensure that multiple versions of the backup are available.

Which two possible backup locations should you use? (Each correct answer presents a complete solution. Choose two.)

A external hard disk
B internal hard disk
C optical media
D remote shared folder

According to the article http://technet.microsoft.com/en-us/library/cc753528.aspx

You can have only multiple backups available at a one time is A and B.
It states that you can schedule a backup on a shared folder but the windows will delete anything that existed before. in the question the key point is having multiple backups at a time. I believe the answer A and B are correct.
On a optical media you cannot even schedule backup. You should use the optical media just for one time backup.

You need to log the CPU utilization of the processes running on Server1 if the CPU utilization exceeds 85 percent for more than one minute.

What should you do? (Each correct answer presents part of the solution. Choose two.)

A Configure an action on the performance alert to run the systempropertiesperformance.exe command.
B Configure a trigger on the performance alert to start the System Performance Data Collector Set.
C Enable the SQMLogger event trace session.
D Create a scheduled task that runs the Get-PSProvider cmdlet.
E Create a Data Collector Set that has a performance alert for Processor (_Total)\%Processor Time.

CONFUSION OVER THE CORRECT ANSWER
ORIGINAL ANSWER WAS A B
I ACCEPTED B AND E
CLASS10E,COM CONFIRMS B E

ANON STATES THAT B AND E ARE THE CORRECT ANSWERS

It definitely not A, have you tried running systempropertiesperformance.exe from the cmdline - its brings up the performance options from the system advanced properties - this isn't going to help haha
TOO MANY ERRORS IN ANON THOUGH

7th Question needs reviewing

Your network contains a server that runs Windows Server 2008 R2.

You need to schedule backups of the server. The solution must ensure that multiple versions of the backup are available.

Which two possible backup locations should you use? (Each correct answer presents a complete solution. Choose two.)

A external hard disk
B internal hard disk
C optical media
D remote shared folder

Answers supposedly A B
A Accept
C Reject for lack of storage space
D Acceptable
B Can be used but most organisations do not save multiple versions of backups to a local hard drive

http://technet.microsoft.com/en-au/library/cc742116(v=ws.10).aspx

To see a list of available backups that are stored on volume h, type:
wbadmin get versions -backupTarget:h:

To see a list of available backups that are stored in the remote shared folder \servernameshare for the computer server01, type:
wbadmin get versions -backupTarget:\servernameshare -machine:server01

Surely A D are more logical answers

Passed With 884
100% Valid

I passed today with 884. This dump is valid. 5-8 new questions or alternate answers.

100% Valid, 1 new question:
Subnetting question: as per Ahmed iMG
you have 2 subnet >> subnet 1: 10.10.0.10/13 and default gateway:10.10.0.1/13
subnet 2: 10.12.0.10/13 and default gateway 10.12.0.1/13
what should you configure to let sub2 1 connect to sub2
the answer was to change SM for both subnets to 255.255.0.0

For 6th Question needs reviewing.

Answer in vce exam states B and D
Run the new delegation wizard for both the server and DC1.

6th Question needs reviewing.

Your network contains an Active Directory domain named contoso.com. The domain contains two DNS servers named DC1 and Server1. DC1 is a domain controller. Server1 is member server.

On Server1, you create a primary zone named fabrikam.com.

You need to create a copy of the fabrikam.com zone on DC1.

What should you do? (Each correct answer presents part of the solution. Choose two.)
A Create a new secondary zone on DC1.
B Run the New Delegation Wizard on DC1.
C Create a new Active Directory-integrated stub zone on DC1.
D Run the New Delegation Wizard on Server1.
E Modify the Name Servers list for the fabrikam.com zone.
F Modify the start of authority (SOA) record of the fabrikam.com zone.

WHY RUN THE NEW DELEGATION WIZARD ON DC1
NOT IN ANON (EXPLANATIONS)
NEED TO RUN DELEGATE WIZARD FROM SERVER1

WHY NOT A AND E

DNS Delegation
For a delegation to be implemented, the parent zone must contain an NS record and an associated A record ( glue record) pointing to each authoritative server of the delegated domain.
Therfore run the New Delegatiion Wizard on server1

5th Question apparently wrong or needs reviewing.

Your network contains a server named DC1 that has the DHCP Server server role installed.

DC1 has a DHCP scope for the 10.10.10.0/24 network ID.

You discover the following warning message in the Event log on DC1: "Scope, Scope1, is 98 percent full with only two IP addresses remaining."

You need to ensure that DC1 has enough IP addresses to assign to clients. The solution must not cause any IP conflicts.

What should you do?

A Configure Routing Information Protocol version 2 (RIPv2) on the router.
B Authorize DC1 in Active Directory.
C Configure Open Shortest Path First (OSPF) on the router.
D Modify the start address.
E Configure DHCP link layer-based filtering.
F Configure name protection.
G Restore the database from a backup.
H Compact the database.
I Increase the database cleanup interval.
J Configure a DHCP Relay Agent.
K Reconcile the scope.

CONFUSION OVER THIS ANSWER
ORIGINAL ANSWER WAS I. ANON CLAIMS D
I ACCEPTED OPTION I

It states: DC1 has a DHCP scope for the 10.10.10.0/24 network ID ... This means adress in the scope is: 10.10.10.0 till 10.10.10.255. (.0 = reserved and 255 is reserved (broadcast). Because the whole range is used you CANNOT extend it. Answer : modify the start adress is not correct. You can only extend the scope with an additional subnet.

- Increase the clean up means in good English make it more/quicker cleanups. So instead of cleaning up 1 time in a hour INCREASE it to 2 or 4 times in a hour.

Please read: http://www.windowsnetworking.com/kbase/WindowsTips/Windows2003/AdminTips/Network/ConfiguringtheDHCPCleanupCycle.html

OTHERS SUGGEST
DATABASE CLEANUP INTERVAL NEEDS TO BE DECREASED NOT INCREASED.
(DEFAULT IS EVERY 4 HOURS, DECREASE TO 2 HOURS TO CLEANUP EXPIRED IP ADDRESSES)

ANSWER FROM ANON :
MODIFY THE START ADDRESS (D)

4th Question apparently wrong or needs reviewing.
Your network contains a server named DC1 that runs Windows Server 2008 R2. DC1 hosts an Active Directory-integrated stub zone named contoso.com.

You need to ensure that DC1 contains the most up-to-date records for the zone.

What should you do?
A From Active Directory Sites and Services, click Replicate Now.
B From Active Directory Sites and Services, click Check Replication Topology.
C From DNS Manager, click Update Server Data Files.
D From DNS Manager, click Transfer from Master.

ORIGINAL ANSWER C
I CHANGED TO A
FORUMS INDICATE A
THE DOMAIN CONTROLLERS CAN BE IN THE SAME SITE.

http://www.examcollection.com/microsoft/Microsoft.selftestengine.70-642.v2011-11-24.by.IsuruSam.304q.vce.file.html
ANSWER A: The key to this question is that it is a AD integrated zone. Meaning that the replication is handled by AD and not
conventional DNS zone transfer. AD replication is faster and more efficient as it replicates on a per property basis, so only the
relevant changes are propagated. Since this is a AD integrated zone it is stored in the dnsZone container and replicated within
the AD replication process. This process is the same regardless if it is a primary or stub zone.


Active Directory Sites and Services, click Replicate Now.
Performing this action is no different than waiting for Active Directory to perform its schedule replication, so no harm will come to you by performing this action. It will just speed things up for you.
If you make a change to your Active Directory domain, such as deleting a computer/user account, you don't have to wait for Active Directory's replication schedule to occur before having that change replicate to all of your other domain controllers.

3rd question apparently wrong or needs reviewing

Your network contains a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Server1 has Microsoft SQL Server 2008 R2 and the File Services server role installed.

Users report that access to Server1 during the morning is very slow.

An administrator creates a Data Collector Set and provides the results shown in the exhibit. (Click the Exhibit button.)

You need to log the CPU utilization of the processes running on Server1 if the CPU utilization exceeds 85 percent for more than one minute.

What should you do? (Each correct answer presents part of the solution. Choose two.)

A Configure an action on the performance alert to run the systempropertiesperformance.exe command.
B Configure a trigger on the performance alert to start the System Performance Data Collector Set.
C Enable the SQMLogger event trace session.
D Create a scheduled task that runs the Get-PSProvider cmdlet.
E Create a Data Collector Set that has a performance alert for Processor (_Total)\%Processor Time.

CONFUSION OVER THE CORRECT ANSWER
ORIGINAL ANSWER WAS A B
I ACCEPTED B AND E
CLASS10E,COM CONFIRMS B E

ANON STATES THAT B AND E ARE THE CORRECT ANSWERS
TOO MANY ERRORS IN ANON THOUGH

2nd Question apparently wrong or needs reviewing.

Your network contains a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1).

A user named Admin1 opens Event Viewer on Server1 as shown in the exhibit. (Click the Exhibit button.)



Admin1 can view the events in the Application log and the System log.
You need to ensure that Admin1 can view the events in the Security log.
What should you modify?
A the user rights assignment
B the membership of the Event Log Readers group
C the permissions on the Server1 computer object
D the permissions on the Security.evtx file
GIVEN ANSWER WAS A
ANSWER EITHER A OR D
I ACCEPTED D
NOT IN ANON EXPLANATIONS

DOES NOT APPEAR TO BE ANY USER RIGHT ASSOCIATED WITH THE SECURITY LOG


Event Log Readers Group
Membership gives access to all of the windows logs.
The question seems to indicate that Admin1 be only given access to the once extra log file - Security
NOT B

NOT C as permissions on server1 computer object are irrelevant

Security.evtx file
The path to the Security log is
%SystemRoot%System32WinevtLogsSecurity.evtx
Properties ...... Security tab
view permissions of users and groups for this file.

Questions apparently wrong or need reviewing :

1) Your network contains a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1).
You log on to Server1 by using an account named Admin1, and then you open Event Viewer as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can view all of the events in the Security log.
What should you do?
A From the Local Group Policy Editor, set Retain old events to Enabled for the Security log.
B From a command prompt, run net localgroup /add "Event Log Readers" Admin1.
C From Event Viewer, right-click Security, and then click Refresh.
D From the Local Group Policy Editor, set Log access to Enabled for the Security log.
E From Event Viewer, right-click Security, and then click Clear Filter.

CONFUSION OVER THIS QUESTION.
ORIGINAL ANSWER WAS C BUT I CHANGED IT TO E.
IF ADMIN1 CAN VIEW THE FILTERED SECURITY LOG THEN ADMIN1 SHOULD BE ABLE TO CLEAR THE FILTER.
NO MENTION IS MADE OF PERMISSIONS THEREFORE EXPLANATION BELOW DOES NOT SEEM 100% VALID



ORIGINAL ANSWER WAS E


ANSWER IN ANON EXPLANATIONS :
ANSWER WAS LISTED AS E BUT CHANGED TO C

I checked is on my system and the answer is: From Event Viewer, right-Click Security, and then click Refresh.
Reason: I emulated the screen by applying a filter. It looks exactly the same. If you have no persmission you don't have the ability to apply a filter.

Verbose
Verbose option : Where there is a lengthy written explanation of what happened during the event.

Passed recently with a high 900. Used this and the Nobuhiro dump. Had the Denver subnetting question and a lot of questions on NAP but not a single question on ports.

Passages today 700 exactly,dumps a still valid in South Africa..

Passed with 930. I only used this dump so it's still valid. 49 questions from the dump, 1 new question. A good mixture of questions from all sections.


The new question was about using a server as a router between 2 /13 subnets. I think the question was about configuring the router to allow communication. There was 5 choices; 3 gave different masks - 255.255.255.0, 255.255.0.0 and 255.0.0.0 ; the other 2 suggested using one or the othersu
/13 subnets for the router. I'm not sure about the multiple choices, maybe someone else can verify?

Passed in Kuwait with 792, remember your ports and 3-4 questions outside from the dump. Thanks :-)

Writing tomoro,@ Mary isn't this dump enough cuz i see most of y'all are mentioning Bruce's dump as well...

Passed today. About 10 new questions, some old ones have different order of displaying. LOTS of questions about DNS and zones.. Used this dump and Bruce's.
THANKS A LOT FOR DOING THIS !!!!!

@ Kitsune and Marry thanks a lot guys....@ Kitsune, goodluck to you too...

@Malxie,use this dump..it is valid and also Bruce's ome

Still Valid. 1 new question. 884.

Thanks community !

Dump is still valid in South Africa. Four new questions. Ports and IP subnetting

Dump still Valid passing score of 815. i had 5 new questions.
one of them was about mounting a backed up VHD image with Image imagex or device explorer.

hi all,

Studying for 70-648, the 640 by Venomous and this one for the 642 part but why is this dump by rafaqat, but the file says bruce/brn.. ?

Is this the right one to learn for 748?

FAIL today with 6++ point..dump still valid. have a question on DHCP and port and DNS

Totally still valid. Passed today with a 920 - few new questions and some reworded ones. Thanks for the dump much appreciated!

Valid Dump . only 2-3 New questions .

Valid in PAkistan

@Malxie
Suggest you use this one and Bruce's 2012-11-22.
Good luck, I'm writing at the end of the month too.

Guys "South Africans", which dump do you suggest is still relevant in SA, i'm writting monthend April??? PLZZZZ HELP...

iam success 884

Passed today with 884, totally valid, only new questions were already mentioned (Denver subnetting, pptp ports, vhd & physical backup), thks to everyone that contributed to this.

Passed the 70-648 today, got a 900 on the 70-642 part. Valid dump, 32 questions pretty much all included those that weren't were similar, 1 word of advice know your ports! got 4 questions just on the port required for DHCP, DNS, RDP etc

Still valid, passed today 815, at least 3 new questions.

Passed today with 861 .. 6 new questions

thanks for all

Dump is valid..Wrote today,i used this dump and Bruce's 2012-11-22.Passed with 884,there's about 4 new questions..

My exam will be tom . I hope this dump still valid . wish me luck . Thanks

@ABC

What do you mean by that ?

This dump still valid I got 831 today.Around 3-6 new questions.

Hi, this dump is still valid at HUNGARY. there were 3-4 questions.

dump is totally right, and learn the port numbers and active directory integrated zones etc etc. There were some droplets (however i have not learnt them)
which is more important the printer devices.

cheers,

lets drink (B)(B)

Hi! Thanks a lot! This dump is valid! Only 2-3 new questions. 5 questions about port numbers.

Most of the questions in this dumps hv 1 option as answer & another as correct answer like Answer: A, Correct Answer: D. Which 1 shud i study - Answer or Correct Answer??Nw it makes sense to study Correct Answer but i'm confused. Pls help me out.

passed today with 954, 3 new questions, best of luck to everyone.

@tony sucks.. Come on bro, don't F around with this stuff. Too much money wasted. If you put that much effort into studying for a cert, it shows how you are going to be in the industry. If you don't take it serious, who is going to take you serious? Put at least 7 days in of study. Know it, memorize it, and learn it all at the same time. Reference you MS books and Google is your friend.

@ Tony,

I failed because of the port too. One more correct awnser and it would do it :s

100% valid! Passed with 746 South Africa
PPTP 1723
SSTP 443
RDP 3389
LDAP 636
POP3 995
SQL 1433

UDP
RADIUS 1812, 1813, 1645, 1646
DHCP 67, 68

TCP/UDP
DNS 53

Dns : Udp + tcp 53
dhcp : Udp 67 + 68
ipsec : P50 + 51, udp500
ldap : Tcp636
imap : Tcp993
pop : Tcp995
sql : Tcp1433
nps auth : Udp1645 + 1812
nps acct : Udp1646 + 1813
pptp : P47, udp + tcp 1723
rdp : Tcp3389


firewall rule to allow pptp vpn,
choose three,
a. protocol 47
b. protocol 50
c. tcp 1723
d. udp 1723
e. tcp 5000
f. udp 5000

100% valid! Passed with 861!

well i failed again. don't try to pull an all-nighter before you take it like i did.

know your ports.
LDAP, DNS, Secure POP, and DHCP.

I failed by two and would have passed if I hadn't put the wrong ports for LDAP and DNS.

Dump Still valid (France) but don't photo-memorize the questions or you will failled and be sure to learn firewall's ports questions..

I personnaly failed the test (681). Only got 1 new question.

Dump Valid in India. I passed with 861 today, 3 new question.

got into the 600s but only studied for 4 hours total. only made it through E-H and droplets. the dump is definitely valid. make sure you study the droplets.

study your subnetting. or memorize this.
denver has networks 137.40.64.0/24 and 137.40.95.0/24
montreal has networks 137.40.96.0/24, etc

create new subnet for denver that fits the current range and doesn't overlap montreal.
A. 137.40.64.0/21
B. 137.40.64.0/19
C. 137.40.64.0/14
D. 137.40.64.0/16

Answer is the /19
in the /19 you get blocks sizes of 32. starting at 137.40.0.0-31.0, .32.0-63.0, ..64.0-95.0, etc. the 64.0-95.0 fits without impeding on montreal's addresses.

ip addresses and letter choices aren't exact, but /19 is your answer.

Passed Today. 3 new Questions (Denver Subnetting |Picked /19 thrusting in the comments| something about 3 loations with /24 , denver has 64 subnets and it shouldt overlap with the other locations, server should be accessable everywhere.), Backing Up a File Server (You have a File Server with 4 HDs, 2 Physical (C(System) & E Data) and 2 VHD (D & F) Both Data. You need to Make as few Backups as Possible and be able to extract ingle files pick 2 (full backup, custom backup C & E, custom backup D & F, custom backup D E F) and i think other choices aswell. third new was vpn (with protocal 47) other question i noticed difrent was clear routing cache of physical network adapter, no arp as a choice. clicked netsh (cause its almost allways netsh ^^).

hope this hels

Passed yesterday.. still valid in pakistan. only 3 new questions...

Passed today, the Dump is still Valid in Bulgaria

@Paspl

20 completly new questions + mixed anwesers / reworded on the rest or from the 20 new questions some just renworded/mixed answers? you comment scares me.

also can someone veryfy which answers from the dump are defently not corrent & the right answers? i kinda lost track its very confusing in the comments

I didn't pass by one question. I guess I wasn't lucky on questions today. I got 20 questions not from this dump. Rest of them were from dump, however several questions were slightly modified and order of answers was changed, so do not just photo-memorize but understand answers!

I passed today 954 .
4 new questions .
And four questions that changed them

Thank you :)

Still valid, I passed on 861 today, 2new question as said ,,asif nasim,, ports for vpn and backup question. Thank you for this lab, nice work!!!

Still valid just passed 861

Yesterday i passed my paper with 817 marks.this is valid dump in pakistan.some new question about vpn(tcp 1723,udp1723 and port 47 is valid anwser.one new subnetting question anwser is /19.one more question about how to take back up i m not sure about this question and dont rmember exactly.

Hi Daniel,
Thanks answer to me. It is very useful to me coz this is my first time Microsoft Exam. I am learning hardly now. All the best Daniel.

Hein, this is enough, no need for CCNA simulations there :) . questions are confusing, so don't just count on your knowledge in DNS/DHCP/NPS/RRAS! you better memorize many of the dump questions!

Studied this exam for the 70-642 part of the 70-648. I got 833 on that part today.
Great job guys!

Exam C, Q17 is wrong, isn't it?

I will sit exam at 23.3.2013. So I study Rafaqat.348q.vce now. Is it preparing enough for 70-642 exam or is will need other lap and simulation questions like that CCNA? Pls kindly reply to me.

passed today in indiaaa...with 861 markss...this dump is valid in india...thanks u soooooooo much....

The dump is valid passed today 15/03/2013 with 861.
A few new questions:
you need to backup 2 physical disks and two attached VHD''s.
Name 3 ports for PPTP, 1723 (TCP and UDP)
Subnetting for a location in Denver.

Still valid, passed today 15.03.2013 with 861 points, just 2,3 new questions.
Good Luck all !

i passed today the exam vaild 840 from israel

Still valid Passed today 838, 8 New Questions.

Fuck in Microsoft and these dumps i failed again in 70-642 and 70-640

Still valid, I scored 907. Only two or three new questions I had.

One about backups, you need to backup 2 physical disks and two attached VHD''s. Didn''t know that one.


Name 3 ports for PPTP, 1723 (TCP and UDP) and protocol 47

And about subnetting for a location in Denver, didn''t know the answer.

Today I passed the exam 70-642 with score of 866. This .vce was perfect for my training. All questions are inside the .vce except 8 new questions.

Passed today. Dump still valid, 1 or 2 new questions and 3 droplets.

i passed yesterday france 746..5-6 new questions , still valid but study hard

alittle problem with test H Question 14, same question at G question 16
those two have the same CPU utilization question but they have a different answer.
can any one say what is the correct answer?

Pass Today elhamed llalah

Still valid Passed today 815 Marks. 5 - 10 New Questions.

Dump stil Valid 900/1000. 5-10 new Q. Poland

Thanks to Bruce.
This dump is fully valid just 2 new question related PPTP and backup other than that the answer has been shuffled around just study from this dump and you will just do fine. Good Luck All

Passed today using this dump in the United States but, some of the questions change slightly as well as some of the answer sets. There were 2 new questions in my test.

Pass today but take care dumps change slightly.

Passed it today with 884/1000, still valid.Only 2 new questions about subnetting and backup.

Someone could make a version in Portuguese so I use? My stuff is all in Portuguese, I'm not good in English so the need of a translated that possibility exists?

Thank you all!

Hi friends,Did you see the new dump it is some how wired and abnormal and really different .Am so worried for the exam because i will take the exam next week.I have studied the Rafaqat dump compeletly and saw the new dump but I am scared as i see the new dump .What should i do? shall I rely to the new dump or the Rafaqat dump is enough ! plz help me

This dump is valid 100%. Passed today

I passed today (7.3.2013). Dumb is still valid. I had new question about masks in subnets. Thanks to All

Your network contains a single Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 and Server2 are namespace servers for the \contoso.comDFS1 namespace.

You need to ensure that users only connect to the \contoso.comDFS1 namespace on Server1 if Server2 is unavailable.

How should you configure the \contoso.comDFS1 namespace?

A. From the properties of the \contoso.comDFS1 namespace, modify the referrals settings.
B. From the properties of the \contoso.comDFS1 namespace, modify the advanced settings.
C. From the properties of the \SERVER1DFS1 namespace servers entry, modify the advanced settings.
D. From the properties of the \SERVER2DFS1 namespace servers entry, modify the advanced settings.

I think the correct answer is C not D.. can you check it .. : )

Best Regards

Passed this test today (March 6) in S. Korea, and this dump is still 100% valid. 2 new questions on the LDAP ports. Thanks to all!

This dump still valid in Russia. I have passed exam a few days ago with 910 score. But there was nearly 5-6 new questions. Thx to all and gl.

still valid just took got 884 know the pptp vpn port numbers

valid, howewer i got one or two new question, but I passed with 848 points

But question Q14 states opposite.

Info taken from http://thelazyadmin.com/2007/02/dhcp-user-classes/

DHCP User Classes allow you to apply additional DHCP options, or a modified set of options, to certain clients on your network as identified by a user class id. For example, you may want to define a different gateway, DNS servers, or lease time for a subset of the computers on your network. This can be accomplished by setting a user class id on those clients (2000 and above) and then configuring that class id appropriately on the local DHCP server.

So the right answer to configure different dns is user class

Hi,Friends ! please help ,I get confused and every one answered differently ! please tell me which answer is true! tnx.
Your network contains a DHCP server named DHCP1 that runs Windows Server 2008 R2. All client computers on the network obtain their network configurations from DHCP1. You have a client computer named Client1 that runs Windows 7 Enterprise. You need to configure Client1 to use a different DNS server than the other client computers on the network. What should you do?

1. Configure the scope options.
2. Create a reservation.
3. Create a DHCP filter.
4. Define a user class.
2 Or 4?
Your network contains a DNS server named DNS1 that runs Windows Server 2008 R2.

You need to ensure that DNS1 only responds to DNS queries from computers that are located in the same subnet.

What should you configure?
1. Interfaces from DNS Manager
2. Security from DNS Manager
3. Trust Anchors
4. Windows Firewall
1 OR 4?
Please help me ..thanks again

@Runemaster
about Exam H , Q 14
I do not think option A will do what you want. Start it and you will see.
Open cmd and run "systempropertiesperformance.exe" . It does not do what you want so maybe if it is the right answer tell me how this does what you want it to do

Passed today with 860. Dump still valid.

i did the exan in 28/02/2012
I passed with 746
i studied this dump and older dump: Microsoft.BrainDump.70-642.v2012-09-20.by.cramjunkie.379q.vce.file.html
there was only one question
Thanks

Passed this exam in France yesterday. the Dumps is still valid. have see 3-4 new questions

Passed this exam in India today.Dumps is still valid, Half of the questions were from part A , jumbled answers.

@zippy
Exam E, Q16 the answer is A. Tried in lab.

Exam E, Q16 appears to be also wrong.

I believe the correct answer is D

Setting the index value to 1 when using netsh..dnsservers will add an Alternate DNS server. The only answer which specifies server 1 and "index=1" is answer D, and not A as the VCE states. In addition, answer A will merely configure Server2 as the preferred DNS server and wipe out the original entry of Server1.

@ zippy the only logical answer would be to creat a disk quota. in order to limit a user to how much disk space they can use you have to create a disk quota for said user

Exam D, Q13

Need help with this one. I cannot see how the correct answer is C.

Your network contains a file server named Server1 that runs w2k8R2. On Server1 you create a disk quota for volume E: that limits storage to 200MB for all users.

You need to ensure that a user named User1 can store files that are larger than 200MB on volume E. What should you do?

A. From File Server Resource Manager create a file screen exception
B. From a command prompt run dirquota
C. From Disk Management, create a new quota entry
D. From Windows Explorer, modify the security properties of the volume.

If someone can explain how creating a new quota entry for an individual user on the volume would override an existing quota, go ahead.

I think this is a really poor question and seems totally wrong.

@someone i had answered why h q 14 is correct below if it is same question

wrong:
C Q17
F Q15
F Q18
H Q14

Exam D, Q6 appears wrong also.

Windows 2008 servers can perform remote backups of eachother, I have tested this. So the answer is definitely not upgrade to R2. However, you must have the Windows Server Backup feature installed on the remote machine, and in addition, you must enable the 3x Event log rules on the WFAS firewall. So, if I were to hazard a guess, I would say the answer is A.

what is the difference between this dumps & brn888 dumps. Can anyone help me out.

Yeah well, we all are, some more than the other.
Yes, droplets are Exam I.
And i had only this question number 17 from the droplets(that i can remember)
There are some qs a bit modified, but if you pay attention you should be ok.
Good luck

Hi Nicole thanks for your information but I have a question, you mean Droplets for exam I and you had just one droplets? am too worried for the exam.

Hi there,
I've just passed using the Rafaqat.348q.vce.
These are the questions i had: Good luck..

Exam A: 1,3,11,15,20,27,30,36,39
Exam B: 2,14,22,23,28,31,34
Exam C: 5,7,18,20,29,30,43,49
Exam D: 1,2,5,12,13,29,30
Exam E: 13,23
Exam F: 1,2,10,19,20,29,39,42,44,46
Exam G: 6,8,12,16,29,30,31,41
Exam H: 1,2,4,5,18,21,27
Exam I: 17

792 All the questions I wasn't sure about were not in my exam lol.

Aced 3 areas and dropped most pts in WSUS and NAP :/

Seemed to focus pretty heavy on those for category 3 and 5

Just passed 648 today, scored 833 on the 642 part

This dump is good enough, but there were a few qs slightly modified with some different options.

that was pertaining to the Exam H, Q 14 comment

@zummy no the question is right because it states within the question that they allready created a dcs so therefore you do not need to create another all you have to do is create a trigger and an action

Exam B, Q26 - Again wrong

Your network contains a server named DC1 that runs windows server 2008 r2. dc1 host an active directory integrated stub zone named contoso.com. you need to ensure that dc1 contains the most up to date records for the zone. what should you do?

A.from active directory sites and services, click replicate now
B.from active directory sites and services, click check replication topology
C.from dns manager, click update server data files
D.from dns manager, click transfer from master

The VCE says C, however updating the server data files is the option you would choose on a primary zone after making a GUI update, - i.e so the update is written to file.

The answer is A: The key to this question is that it is a AD integrated zone. Meaning that the replication is handled by AD and not conventional DNS zone transfer. AD replication is faster and more efficient as it replicates on a per property basis, so only the relevant changes are propagated. Since this is a AD integrated zone it is stored in the dnsZone container and replicated within the AD replication process. This process is the same regardless if it is a primary or stub zone.

Exam B, Q24

I believe this to be wrong.

User1 needs to backup and restore files on Server1. The solution must minimize the number of rights assigned to User1.

A. Add User1 to the Server Operators group
B. Assign the Backup files and directories user right to User1
C. Add User1 to the Backup Operators group
D. Assign the Perform volume maintenance tasks user right to User1.

The VCE says the answer is B, however this option would not give User1 rights to RESTORE data. Therefore I believe the answer is C which does offer restore permissions.

Still Valid I passed from second shot with 769 score but there is 2 new question not in dump

@tottichelli. 50 questions.

exam still valid in egypt pass with 861 90% from the dumb existing

@Zummy,

Yes you are right.

Type systempropertiesperformance.exe in a run box and see what comes up and you will see a control panel applet that controls system performance, like sliding combo boxes and fade/transisition options.! So yes, definitely not correct!

Exam H, Q 14
Your network contains a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Server1 has Microsoft SQL Server 2008 R2 and the File Services server role installed.
Users report that access to Server1 during the morning is very slow.

An administrator creates a Data Collector Set and provides the results shown in the exhibit. (Click the Exhibit button.)
You need to log the CPU utilization of the processes running on Server1 if the CPU utilization exceeds 85 percent for more than one minute.

What should you do? (Each correct answer presents part of the solution.

Dump has answer as A & B, but I believe it should be B & E

A.
Configure an action on the performance alert to run the systempropertiesperformance.exe command.

B.
Configure a trigger on the performance alert to start the System Performance Data Collector Set.

C.
Enable the SQMLogger event trace session.

D.
Create a scheduled task that runs the Get-PSProvider cmdlet.

E.
Create a Data Collector Set that has a performance alert for Processor (_Total)\%Processor Time.

From UK. Passed with 710, almost 95% of these questions were in the exam, i just forgot and made a few mistakes but still passed. Very good dump

Exam I, Q1.

I think this one is wrong too. The Statistics node of "Quick Mode" provide details on bytes sent/received. Clicking on the "Quick Mode" node only shows child nodes, and thus seems wrong.

Still valid in the Netherlands!!! Past yesterday with 838 points.. thank you for creating this. I think it's impossible to graduate without reading the book. I had no new questions.

There is one question in this VCE where the answer is "ARP.EXE". In the exam yesterday I had the question but "ARP.EXE" wasn't available as an answer.

Exam G, Q22. There is a typo in one of the correct answers: D

It should be Prnpub.vbs

Still Valid! passed today with 2-3 new questions!

Passed yesterday with 3 new questions about subnetting. Got 930.

@Zippy:

For Exam H, Q24, correct answers are A, E (so you're right)

*Run the New Delegation Wizard on DC1.(B and D) -- Makes no sense at all. and is duplicated.

@ Systolic7@SouthAfrica:

Which exam have you used and is the corrected answers the right ones?

Writing next wednesday.

Exam H Q14 is also completely wrong.

I am sure that Exam H, Q24 is wrong.
Your have an active directory, contoso.com and the network contains two DNS servers, DC1 and Server1. DC1 is a DC, Server1 a member server. You create a primary zone on Server1 called Fabrikam.com. You need to make a copy of Fabrikam.com on DC1. What should you do, choose 2:
A) Create a new secondary zone on DC1
B) Run the new delegation wizard on DC1
C) Create a new AD integrated stub zone on DC1
D) Run the new delegation wizard on Server1
E) Modify the Name Servers list for Fabrikam.com zone
F) Modify the SOA record of the Fabrikam.com zone.

I am certain the answer is A and E. However, the VCE states B and D - delegation is only used to "delegate" contiguous zones to a different server. In this example the zones are not contiguous.

Just Pass today 862 This dump is 100% valid

still valid but 6 or so new questions. Plus all answers are in different order from the dump

This dump is valid in Bangalore, India. Passed the exam with 815 marks but 7 new questions were thr.

Exam still valid, 2 new questions. got 920

Passed today with 884 Dump is still valid. Several new questions on subneting.

Exam H, Q1: (with a Wrong answer)
----------------------------------------------------------
You have a virtual machine named VM1.
VM1 uses a VHD file named Vml.vhd.

A critical error occurs on VM1 that prevents the operating system on VM1 from starting. You need to mount Vml.vhd on a server that runs Windows Server 2008 R2 Service Pack 1 (SP1).

Which tool should you use?
..................
A) Share and Storage Management
B) Mountvol
C) Storage Explorer
D) Disk Management
................

DUMP's answer: B (Mountvol)

MountVol is NOT for VHDs, but for 'volume mount points'
http://technet.microsoft.com/en-us/library/bb490934.aspx
http://technet.microsoft.com/en-us/library/cc772586%28v=ws.10%29.aspx

So the obvious correct answer is 'Disk Management' (D)

Exam H, Q1: (with a Wrong answer)
----------------------------------------------------------
You have a virtual machine named VM1.
VM1 uses a VHD file named Vml.vhd.

A critical error occurs on VM1 that prevents the operating system on VM1 from starting. You need to mount Vml.vhd on a server that runs Windows Server 2008 R2 Service Pack 1 (SP1).

Which tool should you use?
..................
A) Share and Storage Management
B) Mountvol
C) Storage Explorer
D) Disk Management
................

DUMP's answer: B (Mountvol)

MountVol is NOT for VHDs, but for 'volume mount points'
http://technet.microsoft.com/en-us/library/bb490934.aspx
http://technet.microsoft.com/en-us/library/cc772586%28v=ws.10%29.aspx

So the obvious correct answer is 'Disk Management' (B)

Hai Friends, passed just now with 890 marks. Nearly 3 new questions. Thanks to all..

passed today with 838, had about 3 new questions including a port question on LDAP. thanks for this dumps

please can somebody tell me how long does it take to receive your MC ID and Access Code in order to view your certificate from the MCP membership website.I just created and account on this website not long ago and I havent yet receive the codes I need in order to accesss my certificate.thanks

waooouuuhhh.This is to good to be true.I finally grap this exam with 930/1000.still valid guys.

i pass today with 861 p, the dump is valid.yesssssssssss

MS There are 50 questions in the exam

I need help. In this file say correct answer . Increase the database cleanup interval. But in another files stay answer . Modify the start adress. Which answer is correct? Read this question please.
Your network contains a server named DC1 that has the DHCP Server server role installed.

DC1 has a DHCP scope for the 10.10.10.0/24 network ID.

You discover the following warning message in the Event Iog on DC1: "Scope, Scope1, is 98 percent full with only two IP addresses remaining."

You need to ensure that DC1 has enough IP addresses to assign to clients. The solution must not cause any IP conflicts.

What should you do?

A.
Restore the database from a backup.

B.
Configure name protection.

C.
Configure DHCP link layer-based filtering.

D.
Increase the database cleanup Interval.

E.
Configure a DHCP Relay Agent.

F.
Compact the database.

G.
Modify the start address.

H.
Reconcile the scope.