Microsoft.Dumps4Certs.70-642.v2011-02-05.by.Penetrator.208q.vce

akuma6099

Tuesday, May 24, 2011 7:04 PM UT

Just passed today with a 900-USA. There were about 6 new questions. Some questions were reworded but had the same idea that leads to the answer. There were no questions on subnetting or VLSM. 2 questions on IPv6 "IPv6-Echo-Request" and "FC00" segment. everything else is in here. Should be fine people. Thanks penetrator.

AJ

Tuesday, March 22, 2011 10:07 AM UT

Passed exam with 800/1000, got some 17 new questions (in India). This needs to be updated soon.

Thanks Penetrator, 0verFl0w and OCFreeze.

mor

Sunday, February 27, 2011 7:37 AM UT

i have a Q to mcts :
where did you do your exam ?(at jb,sella.hitech)
it was by prometric ?

delanoya

Friday, February 25, 2011 8:15 PM UT

Thx for the dump pass whit more than 800

dane

Friday, February 25, 2011 3:49 PM UT

I am passed, but 10-15 questions were out of dump, but if you do not know the answers you will pass. I'm just passed with 916 points. Country S e r b i a

MCTS

Thursday, February 24, 2011 12:51 PM UT

hi this dump is 85% valid in Israel there were 8 new questions and there are some questions in this dump that have wrong answers, but learning this should be enough to pass the exam. good luck

Nico

Tuesday, February 22, 2011 3:09 PM UT

Passed it today too with 883.
2 new questions:
One asked for what to do if you want a notification if someone is saving an .exe-file in a folder. Can't remember all answers but should be "Create a file screen on the folder".
The other one was too large to remember all details. It was about DirectAccess, some servers with different server operating systems on it (2003 with SP2, 2008 and 2008 R2) and you should say something about how to change the configuration to make it work. 2 answers were about configuring a static IPv6 adress on two of the servers and 2 answers were about changing the operating system of two of the servers.

Although i knew the dumps totaly by heart and read all of the corrections here in the thread i didnt get 1000 points, so there have to be some more failures in it. But learning it should be enough to pass the exam!

Ay Akiode

Monday, February 21, 2011 4:49 PM UT

Hi guys,
Dump valid today in LAGOS, Nigeria. Just 2 or 3 new questions. I passed with 883/1000. but not too hard if you have studied well......Thanks for all, Penetrator & Hornet & OCFreeze-Blocked

PRIM

Monday, February 21, 2011 2:24 PM UT

Valid in uk. passed 950/1000

I had 9 questions out of my 54 that i havnt seen on any dump..and i think one or two of the answers in this dump are wrong personally...

I know the wording on one of the questions.. was about a threat protection gateway and the answer in this dump says change the default gateway to 192.168.2.1.. (or something like that). the wording i got was slightly different which indicated that this might have been the wrong answer.. wording was something like machine must be able to attach to the local subnets AND the internet.. changing the gateway would loose internet access.. so i chose a route add answer..

i had 2 more questions that basically required knowledge of the "route add" and more specifically the -p option.. i suggest you brush up on this..

i also had a question on IPv6 which basically asked the multicast range..(i guessed this one)

like another poster i got 1 being about making changes to SPF records for a mail server.. I also chose a TXT record..

good luck..

mst

Sunday, February 20, 2011 3:27 PM UT

Valid in Poland.Thanks

Fry

Saturday, February 19, 2011 9:38 AM UT

Valid in UK. Passed 916. There were about 3 questions not in the dump though. You need to have some experience on 2008 R2 to pass do not only use dumps. Good luck.

Mohamed Masthan

Saturday, February 19, 2011 8:15 AM UT

!00% valid in India. Thnks examcollection n penetrator.

owashica

Friday, February 18, 2011 9:45 PM UT

This dump is valid, passed today with 833/1000. thanks Penetrator :-)

Myke

Friday, February 18, 2011 9:26 PM UT

Passed today 950/1000. Dump very valid

Sam

Friday, February 18, 2011 4:25 PM UT

100% Valid.bt 14 new questions not from any dump.new questions are from WSUS and DNS Zones...Passed with 800+..Thanks Everyone..

Henkdevries

Friday, February 18, 2011 7:09 AM UT

@ India, 100% valid. Good luck guys. ( 14th-feb)

spikeboy

Thursday, February 17, 2011 6:26 PM UT

This Dump is valid 100% just passed test today recommend 100%

V

Thursday, February 17, 2011 12:21 PM UT

Passed yesterday and all questions came from this dump! I missed 2 questions ;-)! Thanks Penetrator!!!!!

laws

Wednesday, February 16, 2011 11:24 AM UT

Pass today with 900 not all the question came from these latest few dumps there were questions from older dumps
and new questions that are not in any dumps.
1 question i recall had 4 server and you wanted to deploy directaccess 2 server has 2003 1 server had server 2008 and another with 2008 R2 the question asking what was require to make directaccess work.

the correct answer was upgrade server 2008 to 2008 to R2

Mohamed

Wednesday, February 16, 2011 12:14 AM UT

Dear Guys
I passed yesterday with 866/1000 points. Dump still valid in Egypt. about 2 or 3 new questions, Thanks for all, Penetrator & OCFreeze-Blocked

JG

Wednesday, February 16, 2011 12:05 AM UT

This is still valid on the west coast USA Seattle. Easy pass on 54 questions only about 3 new ones. I did use the MS Press Study Guide 70-642 - MS Press NAP Guide plus VM's to prepare for exam. Took less than 20 minutes to write

Swampthing

Tuesday, February 15, 2011 11:48 PM UT

passed today in northeast US.2 or 3 questions out of 54 not in the dump.related to Direct Access..other than that this is still valid.

Ben Grimm

Tuesday, February 15, 2011 9:58 PM UT

Passed in New Zeeland had 10 new questions (54 Q's), also used CBT Nuggets it helps allot for understanding what you are answering and it actually teaches you loads of new stuff as well, Penetrator/Golan you guys are awesome thanks a whole bunch ;-)

turk

Tuesday, February 15, 2011 11:39 AM UT

in this dump there are three different Q
am not sure from answer
pls help me to find the correct answer
1- msinfo32.exe or perfmon.exe /report
2- you need to insure that file classification rule apply to scanned doc .
B enable the windows TIFF IFilter feature o B modify properties of file classification
3- you need to insure user can view their directory access status
w8 is the correct answer

Virendra

Tuesday, February 15, 2011 10:13 AM UT

I passed today in INDIA: 850/1000.
A lot of the questions came from this dump. Especially the ones from Penetrator, I think i got them all. Some new questions i have never seen before, though.
Anyway, lots of probs for Penetrator for sharing! Respect.

Rico

Monday, February 14, 2011 8:55 PM UT

I passed today in NL: 850/1000.
A lot of the questions came from this dump. Especially the ones from Penetrator, I think i got them all. Some new questions i have never seen before, though.
Anyway, lots of probs for Penetrator for sharing! Respect.

Mehmood

Monday, February 14, 2011 7:26 PM UT

hi guys i posted a report that any One who need metrial about MCITP.
but some bad guys are making problem for me ...
even many guys have reported about me for copyrighting ..
now i m trying to make a easy way to share all metrial about MCITP,
CCNA,CCMP and many other certifications...
AND I ACCEPT THE CHALLENGE OF THOSE GUYS DO WHAT THEY CAN DO....IN WORLD MANY PEOPLE HELP OTHERS THAN THEY ARE NOT CALLED COPYRIGHT ONLY I M COPYRIGHTING ALL METRIALS..
JUST LET ME TO CLEAR THAT I ONLY WANT TO HELP OTHERS..
AND I REQUEST YOU ALL TO HELP OUR IT BROTHERS...TO DO BEST OK.
DONT MAKE DEFFICULTIES ON SOMEONES WAYS.
SOON I WILL BE BACK WITH A EASY WAY TO SHARE THOSE METRIALS....TILL THAT ONLY E MAIL ME...
THANKS

kasumi

Monday, February 14, 2011 2:38 PM UT

I am Passed 866/1000. Total 54 questions have 12 new questions...
in my memory:
1. CMD > the route print question is add what ip route in the table (org. question is add default gateway)
2. push up the files server for 100 client using, the answer have show copier for client or server and transparant cache for client or server for chose
3. IP6 issue. FD00:: or FF00:
4. new ip cal. for subnet

UK_User

Monday, February 14, 2011 1:13 PM UT

This dump is more or less valid.. i passed using this dump today at Prometric, UK. I got 84%. There are probably 5 questions that where not in this dump, 1 being about making changes to SPF records where the answer was TXT. but all in all i only used this dump and passed.. Thanks Penetrator

Ric

Monday, February 14, 2011 12:02 PM UT

@Ian, hoop jy kom reg ou maat, ek skryf ook dalk vrydag, laat ons maar weet wat het jy gekry. Jy moet die ander file download van Hornet.NL.

ian

Monday, February 14, 2011 11:21 AM UT

Hi guys, i writing on cfirday, hpe this file is vaild on pro metric system wish me luck im frm South africa bloem

Iftikhar Ahmad

Monday, February 14, 2011 9:29 AM UT

Valid In Pakistan

engr js

Monday, February 14, 2011 9:26 AM UT

passed today in pak..

Pabi

Monday, February 14, 2011 8:48 AM UT

Passed today in Germany. Language English!

Bakr

Sunday, February 13, 2011 10:03 PM UT

Valid

only new 6-7 questions one of them is about Saving WSUS bandwidth over wan i thought the answer is Branchcache but it's not really that

i scored 883 and yes you can still succeed through this exam blind-fully

the only question from Penetrator add was the TMG one

Thanx Penetrator & Golgon

charles

Sunday, February 13, 2011 4:38 PM UT

More than 70% valid in Canada. Passed yesterday over 900. Big Thanks for contributors. I did my studies using CBT and test them out on lab environment before hammering on dumps.
There is a question about SPF record entry for DNS server. I think the answer is TXT. Few Questions about Branch cache which I cant remember now.

MJ

Saturday, February 12, 2011 8:20 PM UT

TQVM Penetrator and Golgon for sharing..
Pass Today 812/1000,this dump still valid in Malaysia.
Don't 100 % Depend On The Dump Also Need To Study Hard for 70-642 coz Pro-metric Add New Questions on Direct Access,DNS,Server Core & branch cache.

Anyway Good Luck All

WhiteRabbit

Saturday, February 12, 2011 4:14 PM UT

Valid. Wrote the exam yesterday in Canada, got 916. 17 questions were from the additional questions Penatrator/BiH uploaded. 3 looked to be new - Direct Access, DNS and Server Core. I studied the resource kit, Measure Up, Technet and this dump. Yes - it was worth it because what I didn't know, I learned. Do not depend on this dump alone. Study hard, ask questions, KNOW YOUR STUFF.

Amit Jaiswal

Saturday, February 12, 2011 12:06 PM UT

Hi..all
this DUMPS is 100% valid in INDIA mumbai i passed 2day.

Aby

Saturday, February 12, 2011 11:55 AM UT

Hi all.. i studied with dumps 190 q by golgon.. 10-13 questions are new.. i failed the exam. but this new dumps with 208 question seems to be ok in inida ,kerala.the dump by golban_hassan_penetrator.... 18 new questions..

Please verify ... others who wrote or coming to write .please verify..

Thanks

Vijay

Saturday, February 12, 2011 7:07 AM UT

Hi All

This dump is very much valid in India,Today i have passed with 883/1000 in Bangalore.

Thanks for Penetrator and Golgon for sharing.

Good luck All.

DominicanBoy

Friday, February 11, 2011 9:29 PM UT

The questions are still valid, the dump has over 70% of the exam, the new questions are about branchcache, directaccess, etc.

Like how do you purge the brachcache directory and stuff, overall the dump is still really valid

snapple

Friday, February 11, 2011 7:50 PM UT

I am taking the exam in the next week! I have the re-take coupon so I will let everyone know how valid these questions are, I will study but only use dump answers, and predict accuracy. Everyone can take free re-take from Microsoft website for certification :) 15-20% off too!

jbird

Friday, February 11, 2011 7:35 PM UT

Are the questions still valid? Obviously you should check the answers and not rely solely on what this dump says they are, but if the questions are accurate please let us know.

DominicanBoy

Friday, February 11, 2011 7:04 PM UT

Took the exam from this dump and failed, however I think I filled the exam too fast (made the exam in 1 hr) failed with 680 but a fail nonetheless

FS

Friday, February 11, 2011 5:40 PM UT

This dump not valid in us has incorrect answers!!!! Took test failed 564

laws

Friday, February 11, 2011 1:13 PM UT

like to upload that @RIC I'd be keen to see any of the new questions

Peter

Friday, February 11, 2011 12:42 PM UT

I am a rookier and training this dump now.I really want to invite some friends to
commnuicate technology.If you have a same mind with me,you can to join me on facebook.My E-mail address is yiyimi1081@sohu.com

Ghenne

Friday, February 11, 2011 12:34 PM UT

Dump Valid in Belgium passed 850/1000.

Syed Mehmood Shah

Friday, February 11, 2011 11:48 AM UT

dear all friends i have seen many people in IT field they try to

hide there metrial and softwares and other informations.

so i m going to make a group in facebook for those who need

information,softwares,books,and others.

By heart i m inviting all friends to join me on facebook.

let join hands together help others and get help from others

what is your idea about this?
my email adress is
mehmods@gmail.com

NAME: Syed Mehmood Shah.

Jmmj69

Friday, February 11, 2011 10:02 AM UT

Dump Valid passed today 883/1000

Ric

Friday, February 11, 2011 10:00 AM UT

@Hornet.NL I dont want to ask this because i know how all the guys on here will crash this server with demands but, are u willing to send it to me? Here we go my email address is ricardovalidated@gmail.com. If you dont want to it will be fine.
Thanks in advance.

KAYZOSE

Thursday, February 10, 2011 11:26 PM UT

passed today 900, i'm feeling good and i recommend the dumps as long as you know your shit as dumps can only reinforce what you know if you know the concept behind the questions. don't just rely on these dumps coz you are not keeping it real with yourself. For the record right now this dump is not fake, but don't get it twisted as if you rely on these dumps only, then your just playing yourself. Everything has a positive and negative so take a dump and check out the answers to the questions yourself from your own knowledge or technet.,e.t.c

V

Thursday, February 10, 2011 3:23 PM UT

passed last week with 700+; 40% of the questions came out of this dump.

Hornet.NL

Thursday, February 10, 2011 3:00 PM UT

@Ric - I tried 3 times so far. Even switched from Chrome to IE to upload, but alas.. :(

Ashok

Thursday, February 10, 2011 2:24 PM UT

yes !!! This Dump is Valid in India,All Question are from this dump.i scored 960 :).

torna

Thursday, February 10, 2011 2:17 PM UT

Passed with 933 in Spain, thanks a lot to Penetreitor,Gologan,Oczfree and krom, only 2 question or above out of this dump.
Now wait to the 643 !!!

Hans

Thursday, February 10, 2011 12:27 PM UT

I passed today and got 843/1000 in Germany. Dump 100% valid and include all new questions.

Ric

Thursday, February 10, 2011 12:10 PM UT

@Hornet.NL It will be awesome if you could upload an updated dump, that will help us a lot.

psil

Thursday, February 10, 2011 11:59 AM UT

Passed today! Big thanks to Penetrator, 0verFl0w and OCFreeze.
Totally valid dump! some new questions but sure can do it. Don't rely 100% on the dump, study at least a little.

My

Thursday, February 10, 2011 11:16 AM UT

Valid in Netherlands.. Some new questions though..

Hornet.NL

Thursday, February 10, 2011 11:06 AM UT

Congrats 0verfl0w and Niffti..

If I may ask: in what country (state) did you take your exams?

Niffti

Thursday, February 10, 2011 10:58 AM UT

Just passed this exam with 816/1000 :) This dump is valid, about 10 question i've never seen before. Thanks penetrator for the extra questions :) Cheers

0verfl0w

Thursday, February 10, 2011 10:52 AM UT

Passed with 900 ! do not trust only on dumps, about 40-50% of questions not on any dump

Hornet.NL

Thursday, February 10, 2011 10:33 AM UT

@Nico:

It is only possible to run that command on 2K8R2 and since it is not explictly mentioned I would think that DFSDiag is the correct answer.

I have created a revised version of this dump and tried to upload it, however it does not show up yet. I'll have anothert go t it..

Nico

Thursday, February 10, 2011 9:57 AM UT

First of all: thanks for the dump. I will have my second try of the exam next week and hope learning with the dump will be enough to rise from 612 points to over 700 :-)

One question to a question in the dump:

"Your Network contains a domain-based Distributed File System (DFS) namespace named \contoso.comDFS1. You have two servers named Server1 and Server2 that are configured as namespace servers for \contoso.comDFS1.
You need to verify that the DFS namespace replicates succedsfully between Server1 and Server2. Which tool should you use?

A Dfscmd
B Dfsdiag
C Dfsrdiag
D Dfsutil
"

The Dump says B is correct. But Technet says that Dfsrdiag is for verifying namespace replication. So shouldn't C be the right answer?

Thanks and regards from Germany

Jbird

Thursday, February 10, 2011 1:36 AM UT

How'd those exams go? Curious to see how close these are to the current exam. As always, don't rely entirely on these. You should read a book/watch videos to get a true understanding. Couldn't anyone use the same name to post?

KAYZOSE

Wednesday, February 09, 2011 8:24 PM UT

hey guys congrats on the pass. i have my exam tommorow afternoon. thanks penetrator for the extra quest. there is a question about configuring the dhcp relay agent, i'm sure the relay agent is independant of domains as routers can host the dhcp relay agent so i think installing the rras role service would be the first thing to do don't you think?

Penetrator

Wednesday, February 09, 2011 7:26 PM UT

Passed today on Prometric only 786 pt. but a pass is a pass ;-)
But there where a lot of new Quests. @ all I recommend not only learn from Dumps, cause it wont bring you knowledge. Make it like OCFreeze!!! If you dont understand an significate of an Question look at Microsoft Refernzes (TechNet)
Don`t waste your time "only" on the dumps. Okay at the Exam you won`t fail, but you must understand to teach someone how to do.
If someone does MCITP SA/EA to we will see us in Blog 70-640 again.
Hope to help you with the 19 new Questions and wish you all the best for your carriers.
°°Penetrator°°

JM

Wednesday, February 09, 2011 7:00 PM UT

Pass in Portugal! 850/1000! Dump Valid. Thnks Penetrator and Gologan

krom

Wednesday, February 09, 2011 6:57 PM UT

Pass in SPAIN 950 /1000 3 or 4 questions not from any dump. Thank
Penetrator, OCFreeze and all the people that have comment this dump.

psil

Wednesday, February 09, 2011 2:39 PM UT

Congratulations everyone passing the exam. Did anyone take exam in uk? I have mine tomorrow. Good luck tomorrow @0verfl0w.

JS

Wednesday, February 09, 2011 2:38 PM UT

PASS :)

3-4 Qs not from any dump

0verfl0w

Wednesday, February 09, 2011 2:32 PM UT

@OCFreeze
Congratulations !

Mine is tomorrow, so.. wish me luck !

Ric

Wednesday, February 09, 2011 1:23 PM UT

@OCfreeze, good job there brother.

OCFreeze

Wednesday, February 09, 2011 12:30 PM UT

Passed!! 933 score.
so I have mistooken 4 from 54! As dio_di said around 12-13 Qs not from any dump .. I believe I was able to go for ~970+ Score =)
Good Luck All!! =)

dio_di

Wednesday, February 09, 2011 12:10 PM UT

Passed today with 833/1000. Valid dump. At least 12 or13 Q not from this dump but the exam was not difficult. Really possible to pass. Thanks alot to Penetrator for a new added questions.

John

Wednesday, February 09, 2011 12:05 PM UT

This dump is valid! Passed with 883! my exam have those 19 new questions that penetrator putted in this dump plus more 2 new questions.

One talking about agent compliance to see the state of a client computer on a network.
Second one talking about configuring a static ipv6 over a server core installation of windows server 2008 R2. and the answers where:

a. ipconfig
b. netsh
c. ocsetup
d. dnsmanager cmd

Hope this helps!

0verfl0w

Wednesday, February 09, 2011 9:37 AM UT

@mappy
Could you provide us a couple of that "many" questions ?

mappy

Wednesday, February 09, 2011 9:25 AM UT

Hey guys looks like microsoft is publishing poisoned dumps over here deliberately..Similar to the cache poisoning conecpt ;-)
There are many questions giving you wrong answers in these dumps.
Take care.

OCFreeze

Wednesday, February 09, 2011 8:24 AM UT

Morning @ All! =) 1h:45m to my Exam..
Please correct the Q from the new 19 for the IP Sec monitor. I have just found the correct answer with a coffee in my hand. =)
The question is asking how we could use the IPSec Monitor to Monitor the Server, not to connect to server so no need of creating a new security policy!! =)
Appears that IPSec Monitor (MMC) is an old product and it is not enabled/supported remotely since Server 2003 and when you try to connect via that IP Sec monitor (MMC snap-in) remotely to a PC/Server which you need to check /monitor .. first you should first correct a key in the registry of that (remote) PC/Server for the PolicyAgent. =)

MS states:
"On computers running Windows Server 2003 and later, you must set the EnableRemoteMgmt registry key to 1 on the remote computer and restart the IPsec service. Otherwise, you will get an "IPsec service not running" error from the snap-in. The registry key is located at HKEY_LOCAL_MACHINE SYSTEMCurrentControlSetServicesPolicyAgent."
Good Luck @ All! Wish me luck on my Exam!! =))

Jack Sparrow

Wednesday, February 09, 2011 8:19 AM UT

Hey guys, This dumps s more than enough to pass the exam. Im done with 812 in India.

vrfriend

Wednesday, February 09, 2011 7:15 AM UT

Dear Penetrator,
Kindly update after getting the exam.

Best of Luck

Penetrator

Tuesday, February 08, 2011 8:13 PM UT

I Have my Exam tomorow too. 10 am.

I report over the Question as I remember.

GOOD LUCK @ ALL

John

Tuesday, February 08, 2011 7:53 PM UT

I have mine tomorrow at 10:00 am !!

OCFreeze-Blocked

Tuesday, February 08, 2011 7:27 PM UT

Ok, so I started a verification Q by Q .. Till now checked around 70 of the good old 190.. tomorrow I have Exam in 12:00 AM =)))

/F Exam - 3Q/

Your network contains an Active Directory domain. The domain contains a member server named Server1. Server1 has a single network connection.
You need to log every attempt to connect to Server1 on a restricted port.
What should you do?

B) Change the settings of the domain firewall profile.
-----------------------------------------------------------
The Firewall log settings for Enable loging and what kind of Attempts to log (Failed/Successful) are at the "Properties" of Windows Firewall with Addvanced Security. There each Tab of the type of the connection (Domain/Public/Private) has the option to enable the logging and what kind of attempt to be logged /We need every attempt ;))) /I have performed some tests in my VM Test Environment as always/ =)
=========================================================
Good Luck all. I am back to work. no time ! =)

OCFreeze-Blocked

Tuesday, February 08, 2011 7:26 PM UT

/G Exam - 9Q/

Your network contains an Active Directory domain. The network has DirectAccess deployed. You deploy the DirectAccess Connectivity Assistant (DCA) to all client computers. You need to ensure that users can view their DirectAccess status by using the DC

Which two group policy settings should you configure? (Each correct answer presents part of the solution. Choose two.)

B) Dynamic Tunnel Endpoints (DTEs)
D) Corporate Resources

-----------------------------------------------------------
Connectivity verifiers—Connectivity verifiers are used by the DCA to provide information about the connectivity status clients. If connectivity is down then an unavailable status is displayed in the DCA. The connectivity verifier method can be an HTTP or HTTPS URL, or a file location. Plan for multiple connectivity verifiers in a number of locations. For example, configure one verifier behind the NAT64, and another behind the ISATAP gateway etc.

Microsoft states :
"Important:

You must configure the DTE and CorporateResources settings to have DCA functionality. The others settings are optional, but recommended!"

John

Tuesday, February 08, 2011 7:14 PM UT

Yeah i think you're right Penetrator. My bad !! Cuz it says Current CPU so it has to be perfmon.exe !! MSINFO32.exe does not give current state right ?

Penetrator

Tuesday, February 08, 2011 5:55 PM UT

@lwh_2000
Yes it could be msinfo32.exe too, but the question is:
. . . . . Current CPU,network, disk, and memory utilization . . .
and so it means the information that thoose devices delivers just in time.
I mean to be in right saying that the only monitoring tool named "perfmon.exe" deliver the exact utilization at the moment. I hope to be in right, but if not I would be glad if someone could prove otherwise.

lwh_2000

Tuesday, February 08, 2011 5:40 PM UT

MSINFO32.exe or PERFMON.exe /report, is the answer
they also can display a lot of system information

Jay Aytch

Tuesday, February 08, 2011 4:15 PM UT

File is corrupt - unknown question type!

OCFreeze

Tuesday, February 08, 2011 2:23 PM UT

@ Vampiresa I would agree with you since there are some Q (for example - Exam J / Q#14 ) that without the exhibit and the real Topology of the Sites and Server1&2 there is no correct answer.. for this new Q ;)

"Your network contains an Actigve Directory domain named contoso.com. All server run Windows Server 2008 R2.
The topology of the Active Directory site is configured as shown in the exibit.
Server 1 and Server2 host a Sistributed File System (DFS) replica named \contoso.comdfsFolder1.
You discover that client computers in Site3 and Site4 always contact Server1 when they access files in . . .
You need to ensure that client traffic from Site3 and Site4 is distributed between Serer1 and Server2. "

Here the possible answers are either the folder referals and the namespace ordering method, which is inheiritet by the folder's referals settings. ;)
The other two are not related. to the problem :
- Polling setting of namespace is only for the DC Servers and the method for obtainig the namespace metadata between them, not involving the client's method in the Q.
-Advanced tab of a Folder is for the NTFS permissions of the mentioned folder - not for us. =)

John

Tuesday, February 08, 2011 2:22 PM UT

What questions are wrong then ? Cuz all dumps have the same answer, the only question that this dump has different answer is that question that talks about documentation of cpu, memory, device types, hardware, and other things where the answer is MSINFO32.exe and not PERFMON.exe /report.

VIJAY

Tuesday, February 08, 2011 2:18 PM UT

Hi vampiresiva

Please help me to understand which questons are wrong, i have exam this week.

Thanks in advance.

vampiresiva

Tuesday, February 08, 2011 1:16 PM UT

its valid in india,.i passed today,.833/1000, but so many question they gave wrong answer,.when you guys study the dumb,.please check it out

Penetrator

Tuesday, February 08, 2011 1:09 PM UT

@Ric
Yes.

Ric

Tuesday, February 08, 2011 12:54 PM UT

@Penetrator and OCFreeze, did you ad the 19 questions that im reading about from the other threads in you dump? If not could you please direct me to the extra 19 questions that OCfreeze and BiH are talking about.

John

Tuesday, February 08, 2011 11:23 AM UT

Gabriel where did you make the exam ?

Gebriel

Tuesday, February 08, 2011 11:15 AM UT

hi guys this exam pool 70-642 is not valid but there is same ques.. 40%
good luck ...

Jack Sparrow

Tuesday, February 08, 2011 7:57 AM UT

Is this d new questions which s added in exam other than Golagan's dump????
Cud anyone plzz help me in this????