Microsoft.CertifyMe.70-401.v2011-06-29.by.SyedFarazRehman.259q.vce

atp

Tue, 06 Sep 2011 19:51:54 UT

@fladnag, B is possible because Hardware Inventory collects Add/Remove programs information which you can use to build a Query membership rule for Coll1.

Default HWinv cycle is 7 days, increasing the frequency will provide you with updated information to Query.

fladnag

Fri, 02 Sep 2011 21:28:16 UT

For the below question this dump has A for the answer in one exam and B in another exam. I figure it must be A. But this dump and most others show B.
I dont see how B is possible.
You have a System Center Configuration Manager 2007 environment. You deploy Microsoft Office 2007 to client computers in a collection named Coll1. You run the Configuration Manager Web report for Add or Remove Programs, and you query for Office 2007. No computers are found to have Office 2007 installed. You need to identify computers that have Office 2007 installed. What should you do?
a: Configure software inventory to run daily.
b: Configure hardware inventory to run daily.
c: Configure Coll1 to update membership daily.
d: Configure Coll1 to have a collection-specific polling interval.

Rahul

Thu, 25 Aug 2011 11:27:11 UT

Hi Parag,
Software advertisement should be created to deploy App1 is the correct answer of your question.Have you passed the exam?

parag

Wed, 24 Aug 2011 15:55:02 UT

What is correct answer for below scenario. Can anyone resolve me?

parag s

Tue, 23 Aug 2011 17:20:11 UT

sorry for spam :(

In Exam E I observed following confusion

You are going to deploy Microsoft Windows vista. You have a configuration manager package that installs an application named App1. App1 can installed only by using interactive logged-on users rights. When you create sequence, you find that App1 doesn’t appear as available package to deploy. You should e able to install App1. What action should you perform?

A software advertisement should be created to deploy App1.
B software update advertisement should be created to deploy App1.
C Acustom task sequence step should be added to connect to a network share, & a command line should be run to install App1
D The App1 program should be configured to run with administrative rights,and allow users to interact with the program

Answers in this dump is : Software advertisement should be created to deploy App1.

&

Another dums tell me the answer is

Configure the App1 program to run with administrative rights,and allow users to interact with the program

parag s

Tue, 23 Aug 2011 17:13:24 UT

In Exam E, I observed following confusion

You are going to deploy Microsoft Windows vista. You have a configuration manager package that installs an

application named App1. App1 can installed only by using interactive logged-on users rights. When you

create sequence, you find that App1 doesn’t appear as available package to deploy. You should e able to

install App1. What action should you perform?

A software advertisement should be created to deploy App1.
B software update advertisement should be created to deploy App1.
C Acustom task sequence step should be added to connect to a network share, & a command line should be run

to install App1
D The App1 program should be configured to run with administrative rights,and allow users to interact

with the program

Answers in this dump is : Software advertisement should be created to deploy App1.

&

Another dums tell me

Configure the App1 program to run with administrative rights,and allow users to interact with the program

Rahul Pawar

Tue, 23 Aug 2011 11:17:06 UT

Guys,
16/08/2011 failed with 680 marks.

Dinom

Sat, 20 Aug 2011 06:09:28 UT

Not valid in Ä°stanbul. Score 616.
Most of new Qs.

Thanassis

Tue, 16 Aug 2011 12:18:10 UT

Most of the Questions in SyedFarazRehman Dump are included in the Sree Dump. If i read only the Sree dump will i be able to pass this exam? People who passed this exam which dumps have they used?

Ameeth

Tue, 16 Aug 2011 10:12:38 UT

@ Dreamworker, which dumps did you use?

dreamworker

Mon, 15 Aug 2011 07:58:21 UT

passed this one:
NL, 2,5h time, 56 questions (about 12 new ones).

This exam is not that difficult. If you have handson experience you probably pass right away. If you don't have handson experience -> build a sccm test site so you can practice. It will certainly help you. There are some duplicatie questions in this dump BTW.

eis0r

Sun, 14 Aug 2011 11:18:59 UT

almost half of the questions are twice and some of the answers are not correct!
but better than nothing ... thanks!

Sh

Sun, 14 Aug 2011 05:49:48 UT

Hi all,

Any one tries http://www.itexamworld.net/70-401.htm ?

If yes, do you advice?

Gokulnath Aravind

Thu, 11 Aug 2011 06:50:36 UT

Yesterday I fail(India) .Nearly 21 new questions.30 questions from dump. Please refer a lot.. If anybody having latest dump please share me. gokularvind05@gmail.com

from dump4certs

Wed, 10 Aug 2011 19:25:22 UT

You have a System Center Configuration Manager 2007 environment. You have a secondary site at a
branch office. The branch office is connected to the main office by a 512-Kbps (kilobits per second) WAN
link.
You need to eliminate all package distribution traffic on the WAN from the primary site between 3:00 P.M.
and 5:00 P.M.
Which two tasks should you do on the sender address(Each correct answer presents part of the solution.
Choose two.)
A. Configure rate limits for the primary site.
B. Configure pulse mode for the primary site.
C. Configure pulse mode for the secondary site.
D. Configure a schedule for the primary site.
Answer: AD

George

Tue, 09 Aug 2011 23:30:22 UT

From http://technet.microsoft.com/en-us/library/bb632857.aspx

You can also limit the amount of data sent between sites to a fine level of precision. This allows you to specify the size of the data blocks that are sent, and also to specify a time delay between sending each data block. This is called pulse mode. Pulse mode can be configured in the properties of an address on the Rate Limits tab, and it is useful when you have a very low network bandwidth available between sites. For example, you might have constraints to send 1 KB of data every five seconds, but not 1 KB every three seconds, regardless of the speed of the link or its usage at a given time.

So any answer of Pulse Mode doesn't make sense for this question, as it is not a schedule based (between the hours of).

fladnag

Tue, 09 Aug 2011 22:01:08 UT

Nick what is the answer to the new question?
new question:
you deploying critical application appl1 in environment with Wake on LAN enable it is 6 pm and you must get appl1 deployed in with 12 hours what should you do.
a. advertise with start 6 pm and end 6am select enable wake on LAN
b. advertise appl1 as soon as possible select enable wake on LAN
c I cannot remember the rest thet did not make sense
Is it both A&B or just one of them

TzumTzum

Fri, 05 Aug 2011 18:59:03 UT

passed, too.

about 20 new of the 56 questions.
u should definitely work with the product before you take the exam.

Dutchy

Fri, 05 Aug 2011 10:02:08 UT

Passed with 746 Points
56 questions. Around 60% of the question are from this dump. The 2 questions Nick from the Uk posted are in it asswell.

Ameeth

Tue, 02 Aug 2011 11:49:28 UT

Hi Guys,

Which is the latest dump valid in SA?

Charlie

Fri, 29 Jul 2011 17:20:11 UT

This download is corrupted and will not load in Visual CertExam Manager 1.9.1025

Nick

Wed, 27 Jul 2011 13:44:31 UT

And in uk this question requires two answers , A and D ????

You have a System Center Configuration Manager 2007 environment.
You have a secondary site at a branch office. The branch office is connected to the main office by a 512-Kbps (Kilobits per second) WAN link.
You need to eliminate all package distribution traffic on the WAN from the primary site between 3:00 P.M and 5:00 P.M.
What should you do on the sender address?
A. Configure rate limits for the primary site.
B. Configure pulse mode for the primary site.
C. Configure pulse mode for the secondary site.
D. Configure a schedule for the primary site.

Was there any more help on this question ?

new question:
you deploying critical application appl1 in environment with Wake on LAN enable it is 6 pm and you must get appl1 deployed in with 12 hours what should you do.
a. advertise with start 6 pm and end 6am select enable wake on LAN
b. advertise appl1 as soon as possible select enable wake on LAN
c I cannot remember the rest thet did not make sense

Guru

Mon, 25 Jul 2011 14:29:21 UT

This dump is 85% valid. You need to have production expereince to handle couple of tricky questions. The answers would be twisted format and willnot be in the same sequence as in dumps. Get the concepts right and you will be able to clear this certification.

Cheers....Guru

feelz

Fri, 22 Jul 2011 17:36:33 UT

Hello Guys, 56 Q/A, i'm try in:

Date:
15/July - Score: 683
22/July - Score: 683 !!!!!

12/18 - New Questions

i believe that this dump is not valid anymore =/

FeeLz

Fri, 22 Jul 2011 17:35:39 UT

Hello Guys, 56 Q/A, i'm try in:

15/07 - Score: 683
22/07 - Score: 683 !!!!!

12/18 - New Questions

i believe that this dump is not valid anymore =/

not_correct

Wed, 20 Jul 2011 23:02:56 UT

is question 33 correct, aren't you just changing (migrating or moving) to a new parent site... why not add the new parent ip then change the site properties to report to new parent instead of doing an uninstall/reinstall??

babatola

Sat, 16 Jul 2011 22:14:15 UT

Hello peeps,

I am glad to announce that I just passed this exam today. My advice? you need to do a lot personal work to scale this exam.

I practiced this dump and 70-401v2011-06-13by Sree. Though I practised the over 350 questions in both dumps combined, i did NOT get a 900 score. So I can say some answers in the dump are not correct.

I learnt and practiced SCCM personally too (though I am not yet an expert in it), so i believed that helped me with the almost 20 new questions i faced in the real exam.

So use the dumps, verify the answers if you can, and try to at least understand the basic concept around SCCM. it would help a lot. Some of the questions are just tricky and not difficult so always review all answers.

All the best peeps

here is new

Mon, 11 Jul 2011 20:37:41 UT

http://www.dump4certs.com/70-401.html

85 QA updated 11th July 2011

any one have it?

sit

Sat, 09 Jul 2011 06:54:43 UT

Passed on 08/07/2011 in GER. 56 Qs, about 15-20 new Qs. Answers are shuffled and few are rewritten, and some Answers in the dumps are wrong. Good luck guys

theking

Fri, 08 Jul 2011 06:31:47 UT

Hi, this Dump is ~75% valid, can anyone add the new questions? manyy thanxx