Microsoft.BrainDump.70-642.v2011-11-06.by.soso.239q.vce

Hendrik

Tuesday, May 08, 2012 11:07 AM UT

Regarding

You discover that noncompliant client computers cannot access the remediation network. You need to configure the network policy to ensure that noncompliant client computers can access the remediation network. What should you do?
A.In Access Permission, select the Grant access. Grant access if the connection request matches thispolicy option button.
B.In the Type of network access server list, click HCAP Server.
C.In the Type of network access server list, click Health Registration Authority.
D.In Access Permission, select the Ignore user account dial-in properties check box

In this Dump the right answer is marked as D , but the right answer is A.
See: http://technet.microsoft.com/en-us/library/dd348487%28v=ws.10%29.aspx

Keep It SImple

Tuesday, November 22, 2011 11:16 PM UT

@19dcavscout
can you short it and organize it plz
i can''t really understand thx.

19DCavScout

Tuesday, November 22, 2011 8:59 PM UT

Had at least 6 new questions not here:
1) blah blah. you want to enable VPN and dail-up access. which service do you want to install:- it lists about 12-15 services. of course RRAS
2) blah blah. you want to configure your sever to provide NAT services. blah blah- what service do you install?- same as above- again 12-15 services listed-
3) a drag and drop on creating a control over a shared folder for users that prevents certain types of files (a file screen). blah blah.
--- there's about 8+ options. not certain about the answer- but I put install 1) FSRM; 2) configure a file screen template; 3) apply the template to the shared folders (I think that's what it was)
4) I had this LONG question about configuring a firewall server with many requirements (i.e. opens fewest ports, to allow internet access out/ access in from the internet, secure connection, and, PPTP)
--- there were ~6 (multi-line answers). 3 had "Ports: (any)" (so I think those are wrong), it basically left 3.two create an inbound filter options and one create an outbound. basically look for TCP: 80 - not (any)- can't remember the rest
5) had a chose the tab on a DNS dialog box where you find something for configuring a secondary zone or something like that. not certain the answer- but it's not a,b,c,d. it's literally select the tab (which don't open- you just click the tab). I think the answer was SOA
6) and the last one I can remember off hand was another select a section in a dialog box. a tree pain showing sites. the question was asking you to select where you would go to see all connection failure attemps. sorry- brain fried but I can't remember what it was. there were 2 sections, main and quickconfig. both had the same options but QC had 1 more. I figured it was to look at statistics.
I am fairly certain there were more questions not in this guide- but- that's all I can remember

19DCavScout

Tuesday, November 22, 2011 8:58 PM UT

54 questions today. I KNEW this dump- did ok but I passed- compared with a friend who took it last week with this dump- he and I both maxed "Config F&P services" and both got 90% on "Config Network Access" and "Mon/Mng a Network Infrastructure." so- probably still a wrong answer in these two sections in the dump

mike

Saturday, November 19, 2011 1:21 PM UT

Passed today with 730. This dump is still valid but needs upgrading as I encountered about 5 or 6 new questions. Thanks to all the contributors.

how did I do That

Saturday, November 19, 2011 8:13 AM UT

Took the test on 18th and passed with a 760. There was about 7 new questions that are not on this dump.

Over all, use this dump, but do your homework, so if you get any of the new questions. You will not be caught off guard.

SamYeung

Friday, November 18, 2011 5:49 AM UT

still ok in China

gg

Thursday, November 17, 2011 5:37 PM UT

Passed today. Still OK.

Bobycar

Thursday, November 17, 2011 4:36 PM UT

I have already uploaded the new dump but I need to correct it after I found a new option in W2K8 which nearly sounds as a question .see below

Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2 and are configured as DNS servers. All client computers run Windows 7. You create a new zone named secure.contoso.com and configure the zone to use DNSSEC. You need to ensure that all client computers verify whether the name and address information of secure.contoso.com is validated by the DNS servers. What should you configure from Group Policy?

A) an IPSec Security policy
B) the DNS Client settings
C) the Public Key policies
D) Name Resolution Policy rule

first we thougth it was IP Sec but it isn`t!
There is a new Option "Name Resolution Policy Table" new with W2K8 R2
so as I wrote MS will that you know the new fatures in that question

Answer D is the right choise

see also:
http://technet.microsoft.com/de-de/library/ee649207(WS.10).aspx

Mohammad

Thursday, November 17, 2011 12:50 PM UT

it's still valid but there is some wrong answers special in name resolation and file and print sharing.

Zman

Thursday, November 17, 2011 8:20 AM UT

Just took the test in Israel. Scored 880
Got all the 6 new questions, all the other ones were also in this dump. Used 19DCavScout's answers for the 6 new questions.
Answered exactly as in this dump so it's not 100% accurate, but it certainly gets the job done. Thanks to the people who take all the effort in making and correcting this practice test!!!!

Akshaye

Thursday, November 17, 2011 5:15 AM UT

Can some Review all questions and make a list of wrong questions and provide correct answers for everyones benefit.thanks!

alain from south africa

Wednesday, November 16, 2011 7:15 AM UT

Still ok in South africa .I passed now 820/1000

Mohamed

Tuesday, November 15, 2011 8:09 PM UT

I passed today 850/1000 . pls check the answers to recent five new questions

Pinjosi

Tuesday, November 15, 2011 9:56 AM UT

First of all. Tnx for posting this dump. Second point is that someone need to check the dump for wrong answers. i did the exam a few days ago and passed with 800-

so i was lucky :) but i think when you got allot of new questions the failure will be bigger each time.

sparc

Monday, November 14, 2011 3:03 PM UT

So I'm back. 880/1000 is what I got. I actually got the perfect test to prove some of these answers are wrong. I got ZERO new questions that were not covered by this dump and 19DCavScout.

The areas I got PERFECT were "Configuring Addressing & Services" . "Configuring Network Access" and "Monitoring & Managing a Network Infrastructure" . So those answers from the dump & 19DCavScout are spot-on.

The area I got roughly 70% on, that needs to be reviewed by dumpers are "Configuring Name Resolution" . I probably got about 10-13 questions in this area.

The area I got 90% on, was "Configuring File & Print Services"

Good luck everyone, I got every single question right in the dump the night prior to the exam. so I am positive there are wrong answers in this dump relating to name resolution.

sparc

Sunday, November 13, 2011 9:37 PM UT

I would be careful with that guy's site, a lot of his answers are different than these. He doesn't list TechNet references to his answers either. I'm not going to look at it much more, I saw 5 different answers in 20-30 that I looked at.

am i gonna pass tmrw??

Sunday, November 13, 2011 12:36 PM UT

regarding question:
You deploy Network Access Protection (NAP) on your network. An administrator configures a network policy as shown in the exhibit. (Click the Exhibit button.) You discover that noncompliant client computers cannot access the remediation network. You need to configure the network policy to ensure that noncompliant client computers can access the remediation network. What should you do:

the correct answer is:
D. In Access Permission, select the Ignore user account dial-in properties check box.

you can check it out here:
http://070-642.blogspot.com/2011/05/q212.html

sparc

Sunday, November 13, 2011 4:12 AM UT

Gonna be rolling with this dump + 19DCav's answers for the most part. Taking it on Monday morning in the US. Will report back.

pablo

Saturday, November 12, 2011 5:46 PM UT

Was OK in Buenos Aires. I done on wednesday 9th with 880/1000. Still valid!!

Shikundero

Saturday, November 12, 2011 5:15 PM UT

Valid dump. Passed today with 760 and 6 or 7 new questions.

Aravind N

Saturday, November 12, 2011 7:36 AM UT

read this dump carefully if u study whole dump u verify answer bcoz i got all answer in the dump correct in microsoft exam but i got only 790 marks so read carefully

habsrule29

Friday, November 11, 2011 7:14 PM UT

Passed today in Canada with 850. I got 3 new questions that I havent seen on this or any other dump.

moses

Thursday, November 10, 2011 5:22 PM UT

Passed score 790 its 100% accurate.
Thanks

MCP

Thursday, November 10, 2011 12:45 PM UT

Passed today, got a few of the new questions metioned. Valid!! Good Luck for everyone

shibu

Thursday, November 10, 2011 11:48 AM UT

I passed 70-642 (820/1000) today. Still vaild.

All the best for all who going to write the exam.

klein

Thursday, November 10, 2011 10:42 AM UT

hw many new q r dr & wch 1nes r wng

Jimbo

Wednesday, November 09, 2011 6:09 PM UT

AWESOME DUMP!!
Passed with a 950- today in Texas.
1 new question added to these (with 19DCavScout's corrections). I do not remember it all- but- topic: IPSEC on client computers connecting to Server1. Which tool do you use to check subsequent connections (see exhibit= cntrl pnl | admin tools- shows ~15). I chose Windows Firewall (see: http://www.techrepublic.com/blog/networking/ipsec-policy-configurations-on-windows-server-2008-systems/481)

19DCavScout

Wednesday, November 09, 2011 4:38 PM UT

*** Corrections to questions on test G (final 6 new questions)***
(kh.soso.Israel wasn't sure when he posted these)

Q: Configure Client1 (Win 7 Ent)to use a different DNS Server.
Correct answer is A: Define a user class
reference:
http://technet.microsoft.com/en-us/library/cc737299(WS.10).aspx

Q: excel spreadsheets automatically moved.
A: (already correct) c: Create a file management task
reference
http://www.windowsitpro.com/article/security/q-how-can-i-scan-for-certain-files-and-move-them-to-a-secure-folder-

Q: prevent users from storing more than 100MB of data.
A: (already correct) A: File server Resource Manager (FSRM)
reference:
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/6e7fdcc8-f55d-43c9-9d9a-4fcd1448a210/

Q: You need to ensure that adatum.com DNS zone is only replicated to DC5 and DC2.
Correct answer is A: Modify the zone transfer settings
ref: http://technet.microsoft.com/en-us/library/cc784421(WS.10).aspx
(C: create App dir part is incorrect because that applies only to Win 2003)

Q: ensure noncompliant computers can reach the remediation network
A: (IDK- no exhibit)

Q: ensure internal DNS infrastructure supports Name resolution to DirectAccess.
A: (already correct) C: Modify the global query block list.
(supposedly confirmed through technet- stated by Roodee on previous discussion on bobbycar vce)

passed in SA

Wednesday, November 09, 2011 1:26 PM UT

50 questions
passed with 850/1000
some answers in dump not correct. configuring name resolution and config file and print servers.
bobycar + 6 questions came in.

Nour

Wednesday, November 09, 2011 10:48 AM UT

Guys please specify the wrong answers

jack

Wednesday, November 09, 2011 10:37 AM UT

Still valid passed today 880, had 3 out of the 6 new questions.
GL.

Shiva

Wednesday, November 09, 2011 10:09 AM UT

Still ok in France. Tanks bobycar !!! Passed with 770 but some answers are definitly wrong . Anyway the questions were the same !

kh.soso

Wednesday, November 09, 2011 8:54 AM UT

Hi everyone it is me kh.soso i passed today 880/1000
there are Definitly some wrong answers in section Name and resolution and in section Configuring file and print services Be Careful
good luck everyone

weiyanglong

Monday, November 07, 2011 11:30 AM UT

i passed 72-642 with 820/1000 this morning.i only learned Bobcar'dump and +6 new questions,same as this dump! hope this message could help you. Good luck!!

gogo

Monday, November 07, 2011 11:03 AM UT

the same as Bobycar +6 New questions