Download Cisco.Prepking.640-822.v2012-02-16.by.tjasp.268q.vce

Comments

* The most recent comments are at the top.

• JohnLegend from United States - Sep 07 2012, 1:37 PM Report Spam

  In response to Sherri below me, for anyone looking to know the answer:
  you've done the legwork finding out the increment is 16. What I usually do is wither use binary AND to get the answer...or the longer winded method:
  1. Divide the increment by the important bits in question(i.e. 16/160 = 10 if answer has remainder just drop it)
  2. Then take the answer I got and multiply it with the the increment to get the subnet the IP address is in. 16*10=160 (so 10.1.160.0/20)
  3. match this range (10.1.160.1 - 10.1.175.254) to the answers given, which leaves us with ACD as the answers
  
  Yes, this is a whole lot of wording, but when I see that this will be faster than doing a binary AND operation I'll use it. In most cases it's just simplest to use binary ANDing to get the subnet, especially using a dry erase sheet/board and marker to do these subnetting questions
• Sherri from United States - Aug 06 2012, 11:29 PM Report Spam

  Hi everyone, I'm using the dumps in the manner they were meant but I'm having trouble understanding how to quickly determine the answer for the following subnet question in this dump. The question is:
  Which IP addresses are valid for hosts belonging to the 10.1.160.0/20 subnet...Choose 3
  
  A_10.1.168.0
  B_10.1.176.1
  C_10.1.174.255
  D_10.1.160.255
  E_10.1.160.0
  F_10.1.175.255
  
  I understand why option E cannot be correct because it is the network but how can I quickly compute the correct answers when the increment is 16? What am I missing to quickly solve this on a test? I had no problems getting the other subnet questions correct so I know my method is correct. Puzzled
• Spartacus from South Africa - May 25 2012, 10:31 AM Report Spam

  South Africa - Guys I used this and I passed my ICND 1 exam and also you must get the CBTnuggets and for labsims use 9tut.net......... Good luck
• ATL from United States - May 20 2012, 11:18 PM Report Spam

  This question is not all there
  The FastEthernet0/0 interface on R1 goes down. In which two ways will the routers in thisnetwork respond to this change? (Choose two.)
  
  A. All routers will reference their topology database to determine if any backup routes to the192.168.1.0 network are known.
  
  B. Routers R2 and R3 mark the route as inaccessible and will not accept any further routingupdates from R1 until their hold-down timers expire.
  
  C. Because of the split-horizon rule, router R2 will be prevented from sending erroneousinformation to R1 about connectivity to the 192.168.1.0 network.
  
  D. When router R2 learns from R1 that the link to the 192.168.1.0 network has been lost, R2 willrespond by sending a route back to R1 with an infinite metric to the 192.168.1.0 network.
  
  E. R1 will send LSAs to R2 and R3 informing them of this change, and then all routers will sendperiodic updates at an increased rate until the network again converges.
  
  Answer: C, D
  
  QUESTION 25:Exhibit: Actualtests.com - The Power of Knowing
• kc10boom from United States - May 20 2012, 3:06 AM Report Spam

  @Dudeman. I agree completely on people just memorizing the answers and not having a clue about the concepts. You can identify them pretty easy based on the questions they ask in the comments. The cert people that just memorize answers get eliminiated pretty quickly when interviewed (in cases where IT people conduct the interview)
• Dudeman from United States - May 18 2012, 5:57 PM Report Spam

  In this dump there are a few issues i saw 1 question with a picture that was 100% unrelated to the picture. and question number 44 asks refer to the exibut the pc has a nic set for 100 mb half dublex. The pic shows the switch set for full duplex 100mb and the correct answere is that the switch is set to fullduplex. The correct answere is not available as a selection. The correct answere should be either there is a duplex mismatch causing intermitant connectivity issues or the pc nic should be set for 100mb full duplex.
• Dudeman from United States - May 18 2012, 4:25 PM Report Spam

  If you fail (which i did on my first attempt before i really used these 737 needed 804 ) you have to wait 5 days. I dont get why there is so much discussion of this but its a mere 5 days not 180. If you pass you would have to wait 180 days to take this test again. But i dont know why you would unless you worked for a company that was simply collecting info about the test like say for these dumps. One should never simply use these dumps as a way to pass it is a quick and dirty method but lets all be professional and not wreck the cert itself by not knowing and understanding networking theroy. If people just get certified and dont know the theory it makes the cert worthless.
• Samue; from Singapore - May 18 2012, 8:44 AM Report Spam

  Hi bros,what is the passing marks for ICND1?804/850 out of 1000?
  I am taking my ICND1 next week.Thanks alot bros.
• cisco newborn from Russian Federation - May 11 2012, 1:07 PM Report Spam

  sorry, options:
  A) A core router
  B) The HQ Internet gateway router
  C) The WAN router at the central site
  D) remote stub router at a remote site
  
  The dum says that it's D, But I don't understand why and which line shows it?
• cisco newborn from Russian Federation - May 11 2012, 1:04 PM Report Spam

  Thanks for answer. I have one more quetion:
  
  Refer to the exhibit. The output is from a router in a large enterprise. From the output, detemine the role of the router.
  
  RouterA# show ip route
  Codes: C-connected, S - static . . .
  gateway of last resort is 0.0.0.0 to network 0.0.0.0
  172.16.0.0/24 is subnetted, 1 subnets
  C 172.16.1.0 is directly connected, Ethernet0/1
  10.0.0.0/30is subnetted, 1 subnets
  C 10.255.255.200 is directly connected, serial 0/0
  S* 0.0.0.0/0 is directly connected, serial 0/0
• Rene from Netherlands - May 09 2012, 4:09 PM Report Spam

  @cisco newborn
  
  Because they state : The company is concerned about possible problem from voltage potential differences between the two building.
• cisco newborn from Russian Federation - May 09 2012, 2:39 PM Report Spam

  Guys,
  who know the answer?
  Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problem from voltage potential differences between the two building. Which media type should be used for the connection?
  A) UTP cable
  B) STP cable
  C) coaxial cable
  D) fiber optic cable
  
  The answers shows D. But I don't understand why it cannot be UTP? the distance between offices is just 55 meters!
• dsfdsfsd from United States - May 09 2012, 1:31 PM Report Spam

  Can someone tell me if this has labs like ccna. I know they have 3 questions that require to login to swiches/routers and do certain things.
• CISCO-Robb from United States - May 07 2012, 11:29 PM Report Spam

  Took the exam today and PASSED with a 865. The dump is still 80% accurate. There was a new drag and drop on: ATM, DNS, ATM, and FrameRelay. I used this site along with 9tut.
• Mark from United States - May 06 2012, 11:52 PM Report Spam

  taking the ICND1 this week. any last minute tips and things I should really pay attention to? Used these dumps, 9tut, and Cisco Discovery Curriculum. Thanks!
• Jeremie from Canada - Apr 23 2012, 7:58 PM Report Spam

  Really useful dump 50% of these questions can be found in the actual 640-822 exam. Be sure you know Cisco IOS very well since a lot of questions refer to Cisco IOS commands.
  I passed with 812/1000
  Good luck!
• zero from United States - Apr 20 2012, 9:47 PM Report Spam

  I'd say this dump is about 80% accurate, max. Still very helpful. But I used this dump and almost entirely the Cisco Press ICND1 book to prep. Read the whole book, spent a ton of time practicing subnetting, and used this dump. That's it.
  
  I passed today. Don't just rely on the dump and nothing else - you'll absolutely fail. You MUST have a firm grasp on subnetting in order to pass.
• xexes from United States - Apr 16 2012, 2:31 PM Report Spam

  @everyone who passed: how long yall study? cisco dumps seem hard to memorize!!??
• Dude from United States - Apr 16 2012, 1:03 PM Report Spam

  Used this dump to pass the test with 887/1000 on friday. This test had about 85% of the questions on the test. I used CBT Nuggets, 9tut, and this dump to prepare for the test
• KingJames from Mauritius - Apr 12 2012, 4:15 AM Report Spam

  Passed my ICND1 yesterday with a 962/1000 . I recommend 9tut, Trainsignal (Cbryant) video, CBTnugget (Jcioara) video, and Wendell Odom ICND1 book. This dumb was also helpful.
• wicked from Unknown - Apr 10 2012, 6:05 PM Report Spam

  is it posible to only use the dump and pass? just curious since i dont have enough study materials
• neil from United States - Apr 10 2012, 3:14 PM Report Spam

  xexes, It took me about 2 weeks. I passed with an 840...
• xexes from United States - Apr 10 2012, 1:44 PM Report Spam

  anyone have difficulty memorizing the dump?? how long yall study?? thx
• cs from United States - Apr 07 2012, 9:31 PM Report Spam

  Ugly, you scared me.. It's not six months if you fail, it's six months to take the same test if you pass.. From Cisco's website:
  •Candidates who fail an exam must wait a period of five (5) calendar days, beginning the day after the failed attempt, before they may retest for the same exam.
  •Once passed, a candidate must wait a minimum of 180 days before taking the same exam with an identical exam number.
• suma from India - Apr 07 2012, 9:53 AM Report Spam

  this vce is valid one passed with 972/1000 today morning
• Ugly2 from United States - Apr 06 2012, 7:27 PM Report Spam

  Note: If you don't pass it will be 6 months (180 days) before you can retake the exam. That was on the Cisco Print out Form that had the score. So don't take it if you are not ready!
• Ugly.. from United States - Apr 05 2012, 5:06 PM Report Spam

  OK, I passed this morning. Not sure how! It was "Ugly" Took me over an hour to take it and I'm not sure how I passed at all! This dump is about 50 to 60 percent of the test that I took. The rest was what I know and my "Good Looks" (LOL) Not really allot of subnetting on the test that I got and there was one question that even with knowing subnetting didn't make sense at all. Thank you to everyone for your comments and the person that took the time to put this website together of all of us unworthy folks. On to ICDN2 then on to CCNP.. Long trip ahead.. See you all at 840-816. Take care..
• questioning??? from United States - Apr 05 2012, 1:47 AM Report Spam

  "dooda from United States - Apr 04 2012, 9:14 PM Report Spam
  Dump was very helpful, passed ICND2 today with 944. Thanks for the work put in. close to all ?'s were on exam."
  Question,You passed ICDN1? or ICDN2?
  This is ICDN1 not ICDN2.
  Sorry for questioning, but, there are quite a few people looking to pass ICDN1 here. Then on to ICND2.
• dooda from United States - Apr 04 2012, 9:14 PM Report Spam

  Dump was very helpful, passed ICND2 today with 944. Thanks for the work put in. close to all ?'s were on exam.
• Techfindings from Sri Lanka - Apr 04 2012, 8:24 AM Report Spam

  Visit this link to download cisco packet tracer and GNS3 IOS images..
  
  http://www.techfindings.com/cisco-lab-simulators-and-emulators-f18.html?sid=fbd55c772ca0a3d8202087c07dc62708
• xexes from United States - Apr 02 2012, 9:18 PM Report Spam

  is it better to take CCNA instead of ICND1 and ICND2 ?
• khalidspace from Egypt - Apr 02 2012, 8:40 AM Report Spam

  @moe
  sorry for the late response.As I said my exam was 95% of this dump but you cannot depend on it only because the answers are shuffled and the questions a little edited. I used CBTnuggets video training and CCENT/CCNA ICND1 Official Exam Certification Guide, Second Edition(Wendell Odom) as a text book to study for the exam. the exam is very easy if you study for it.It took me less than an hour to finish the exam and I scored 925.
  
  good luck
• Juicy from Unknown - Mar 29 2012, 5:32 PM Report Spam

  I will be writting my icnd 1 next month can any one send me some simulation and some type of subnetting questions my email address is juicykash@live.com
• xexes from United States - Mar 29 2012, 2:44 PM Report Spam

  are the answer order shuffeled?
• Rizwan from United Kingdom - Mar 29 2012, 11:50 AM Report Spam

  Passed exam today , this VCE file is great for practicing the exam, 75% valid but do not bother attending the exam if you do not know subnetting, OSI Layer, TCP/IP Layer, Static/Dynamic Routes, as the ip addresses will be changed and answers will be different on all sims. Learn your commands and WAN Protocols.
  
  For my revision
  
  1) CBT Nuggets / Cisco Networking Academy Notes
  2) www.9tut.com
  3) Boson Net Sim or GNS3 for practical
  4) Practice this exam and previous exams
• moe from United States - Mar 28 2012, 7:10 PM Report Spam

  @khalidspace
  Did you just study this dump? How many questions were from this dump?
  On a scale of 1-10 how hard would you say this exam is?
  
  Thanks
• khalidspace from Egypt - Mar 28 2012, 2:01 PM Report Spam

  very valid dump only 2 or 3 questions was out of the dump.I passed today 925 thanks for the dump. but my advice don't memorise the answers, understand it because you will find the exact questions with a little bit of modification. for example if you the show command shows that a the ip is using subnet 28 it may be 29 in the real exam with the same exact question so good luck for you all, see you soon in ICND2.
• martin from Latvia - Mar 28 2012, 11:02 AM Report Spam

  well it is good, but you will not manage with this alone. i got CCENT in the past week but i had to read a lot in the cisco site and wikipedia. this dump can give you 70% or even all 100% depends on random and luck :) i will say in that way, this dump is really good if you investigate and learn why each exact correct answer is the correct one
• alan from United States - Mar 26 2012, 2:31 PM Report Spam

  I'm looking at taking this test this week and have read all of the comments and suggestions. Anyone in the US take this test and rate it? I'll check back every morning to see the results.. Thank you all.
• xexes from United States - Mar 24 2012, 2:05 AM Report Spam

  so the test changed?
• Alexander from Canada - Mar 23 2012, 3:45 PM Report Spam

  Hello, everyone. I passed it today in the morning. I'd say about 50% of questions come from this dump. Yet it gives a very good idea of what you should expect on the exam. You need to have at a little bit of practice, Packet Tracer would be just fine. A week ago I failed it with 787, but today I scored 899. Good luck, brothers in technology.
• Duke from United States - Mar 23 2012, 3:06 PM Report Spam

  This dump is %100 valid. Just passed this morning 3/23/12 with a 950/1000. Most of the questions from this dump were on my test. Thanks to this site and 9tut.net. Onto ICND2!
• Bob from Australia - Mar 23 2012, 2:04 AM Report Spam

  Passed 960/1000. This file is still very valid. Use this file only as a study guide, some questions slightly tweaked. Do the labs on Cisco's website, create some GNA3 labs, watch CBT Nuggets (Jeremy is great). Couple of new questions on WAN technologies including which one is which out of Frame Relay, Circuit Switched etc and how they match up. If you know your sub-netting and can see /28 and go..yip that's subnet mask of 240 in the 4th octet and a increment of 16 you'll be fine. Practice practice practice and you'll ace it. I would say that 9tut.com and this dump have 80% of the questions. So if you can't pass you probably don't deserve to pass. I was getting 90% on my first time through these questions. 97% the second and last time. Hope that clears it up for some of you. :)
• Jay_B from South Africa - Mar 22 2012, 11:39 AM Report Spam

  hey guys i want to write icdn1 exam this month end i want to know if this questions are still valid if not can some pleas send me the latest one n tips for what to look for
• xexes from United States - Mar 21 2012, 10:10 PM Report Spam

  wade, good luck, check 9tut.net for ICND1 help also, let us know the feedback and if the answers were shuffeled.
• wade van wyk from Unknown - Mar 20 2012, 8:04 PM Report Spam

  I am going to take this ICND1 test on March 30, 2012. Can any of the recent test takers advice what simulations they got? My e-mail is vanwykwade@gmail.com if any of u wanna send some stuff will appreciate alot
• Aibek from Kazakhstan - Mar 20 2012, 12:54 PM Report Spam

  Hi guys, passed today ICND1.
  For sure these dumps are still vaild and a lot of question where from here.
  Also 100% need to look through 9tut.net for icnd1, this is mandatory.
  Off for icnd2.
• Karthik from Qatar - Mar 14 2012, 5:55 PM Report Spam

  I am going to take this ICND1 test on March 30, 2012. Can any of the recent test takers advice what simulations they got?
• harikrishnan from India - Mar 12 2012, 5:52 AM Report Spam

  shiva send me your email address so that i will send u rest of the question and answer
• Shiva from Qatar - Mar 11 2012, 1:24 PM Report Spam

  All,
  
  I am planning to take the ICND 1 exam. This site lists a lot of .vce files. Are these the dumps which lot of you folks are talking about? Also, it is only allowing me to view 5 questions after downloading the Virtual exam suite. Can somebody please help me in this regard? Also, can the recent test takers comment if they went through all the files posted under the section ICND 1?
• fred from United States - Mar 07 2012, 6:57 PM Report Spam

  Craig, so the questions on the exam were the same but with different numbers?
• craig from United States - Mar 07 2012, 2:37 AM Report Spam

  I just passed with an 825 on 3-6-12. Many of the questions were a little different, but the essence of the questions was the same. If you use this as a study guide you’ll pass. As others have said make sure you have subnetting and routing down.
• Marco from United States - Mar 03 2012, 7:59 PM Report Spam

  Dump valide, passed Feb 29 with 950...recommend not coming to the test without firm grasp on subnetting.
• Peter from United States - Mar 02 2012, 5:30 PM Report Spam

  Hey Req, What dump did you use?
• Req from Canada - Mar 02 2012, 3:37 AM Report Spam

  Just took the test and got 850. Dumps are good, but I only had about 15-20 questions, Make sure you know how to subnet and WAN technologies. 9tut site had 2 of the 3 simulations, the numbers were diff but concepts/commands were the same. ITS A HARD TEST! I thought I would come out with 99% and I still had 30minutes left. Just make sure you know your stuff, don't rely just on dumps.
• rka61 from United Kingdom - Mar 01 2012, 4:52 PM Report Spam

  Tool the exam and passed around 20 of my questions were from this dump. But the rest were not so make sure you know your stuff. Time is of the essence. I look the test in the UK. Make sure you know your subnetting!!
  All the best to the rest of you, now off to ICND2
• Datcolin from United States - Feb 28 2012, 4:13 PM Report Spam

  Guys and Gals,
  
  Is this dump working. I heard that CISCO has changed ICND1 exam questions?
  
  Cheers!
  Colin
• Pieter from South Africa - Feb 28 2012, 4:53 AM Report Spam

  Passed last week, used online video training, CBTnuggets and 9tut.
  Also used colvomak a few times and switched to this (tjasp), because questions was split up.
• IN from Libyan Arab Jamahiriya - Feb 20 2012, 9:04 AM Report Spam

  vbnm from UAE---------- is it sure and 100% dumps for exam. How u conform me. Plz me know. Secondly i want to give exam for CCNA Voice. Afte complete exam CCENT I, can i give exam for CCNA Voice?
• vbnm from United Arab Emirates - Feb 17 2012, 9:06 AM Report Spam

  Its the same file as the last 3 dumps but this dump has it divided in to 6 parts easier to study guys

Vote For This File

Verification:* Type the characters from the picture.

Add Comment

Name:*
E-mail:* This e-mail will not be published.
Comment:*
Verification:* Type the characters from the picture.

Stay Up With The Latest VCE Uploads

Subscribe to the latest VCE uploads RSS feed.

Site Search: