Pass Your Cisco 640-816 Exam Easy!

Thanks a lot. I got 986 for this exam. yay CCNA on the very last day.

Cheers Anonymous/HeavyMod :)

MCNULLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLTY!!!!!!!!

Hi guys I downloaded this "Cisco.passguide.640-816.v2013-06-17.by.Anonymous.271q.vce" but in my visual cert manager is comes up as drag and drop by majin. Just wanna double check and make sure I'm doing the right questions. Thanks.

Passed today with 944/1000 score, thanks to Anonymous, 9tut and CBT Nuggets, got VTP,Frame-Relay sims

I've passes the exam thanks to the dump by anonymous and 9tut.net. i got 902. the dump is very very valid. they brought vtp and frame relay sims. Am so hapi. am now cisco certified.Thanks y'all!!

@testtaker, just did the test today, there are a couple of ICND1 questions on the ICND2 test.

Are there really some icnd1 questions on the icnd2 exam ? Port-security and crossed-straight wires questions etc ? The 200-201 exam_file has none of them !

I just passed today.All of the questions in my exam are from this dump.Had I studied seriously I would have gotten a perfect score. I got 930 but very disappointed that I missed the 3 questions from this dump.Thanks for sharing this dump whoever you are.

Passed today with 916. Of course IP addresses were changed had VTP and Frame Relay (show run worked) 2 sims 5 drag and drops, only about 60% of questions though were from the dumps so know your stuff. Hardly any questions from ACL, a few from IPv6 lots of OSPF and EIGRP. Good luck only 4 days left before the exam is replaced with new one

Hi Guys, Gave my test today and passed with 986/1000. Every question was from HeavyMod and Anonymous. As mentioned by previous candidates that the IP address and answer sequence were changed.
I had VTP and Frame Relay (Note: In frame-relay, show run command was disabled to find out default encapsulation for serial interface. So I had to use Show Interface Serial 0/1 to get encapsulation details.
I studied from HeavyMod, Anonymous and 9tut.net
Goodluck 

Got through the exam.. I'm CCNA qualified now. This dump is really valid, but answer sequence were changed, therefore read the full answer before select the answer.. VTP and Frame Relay was there. Do this dump thoroughly.. and get to know the concept.. then you will pass surely.. Good luck and wish you all the best.. Thank you very much..

this dump is still valid. understand the concepts and all shall be well. Am CCNA certified AM SO HAPPY

passed with 944 today. I thank God. I thank you all for contribution

Took ICND2 Exam and scored 790. Received a miserable 33% in Implement and verify WAN Links. What study material can I use to improve in this particular area? How soon can I retake the exam after receiving a failing grade?

Just passed, 986/1000. VTP Sim is all I studied as far as sims go and was all I needed. OSPF show frame-relay map and show run was required for a simlet. I will be making a donation to 9tut shortly for their work. Good luck to all.

Just got back from exam center, very valid dump, EVERY question was in here and/or 9tut.net

986/1000! Great thanks to all guys ;)

100% vallid - Passed today, and all Q were in this dump!

Last Saturday i pass icnd2 with 958, i had VTP and Frame relay sim, my exam had 90% of vce questions. Thanks a lot

Dump is 90% valid passed with 958. two sims vtp and frame relay.

The dump is very valid. Passed icnd2 on 20.09.13. Thanks to 9tut.net and this page

Any difference between this dump and Heavymod's dump? I have only studied this one.

Does anyone know all the simLabs for ICND2 and the links for them?? Thanks!

Thanks guys:), Have 2 hours before the exam. Passed (980 Point). I got 2 SimLABS VTP and Frame Relay.
Link for SIMLAB: www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim
(IP addresses changed.)
Frame Relay is the same. The dump is over 90% valid

Passed my exam 930. Over 80% of the quetstions all valid. Thanks.

I have passed 930/1000. Very valid! I was using: (live lab/cbt/9tut/cisco packet tracer/dumps/google). Gl mates! :)

I would suggest setting the questions to 45-50, from the entire exam.
Also check out 9tut, don't just use one place!! And know your stuff, understand it...... these tests should be used to guage yourself and what you need to work on.

Pass today with 958.The dump is 90% valid.Got VTP and Frame Relay sims, couple drug and drop and almost all multiple from that dumb

Do i have to practice all Sections of these questions or only A or B or C etc?

Passed the exam yesterday with 888/1000. Dump is 90% valid.

Brasil / Brazil - Exame feito e aprovado com 944/1000. Quase todas as questões objetivas estavam neste simulado, mas ATENÇÃO! algumas estavam alteradas. 2 labs também. Havia um drag-and-drop de endereçamento de impressoras, onde blocos de endereçamento IP deveriam ser associados a determinadas interfaces.

Almost all the choose one or multiple options on the test were on this dump. The Frame Relay and VTP sims too.

It was great guys. Thanks!

I always saw in the ICND1 100-101 VCE the Topology of HOTSPOT question (i think trice? ) which is ..

SWITCH A connected SWITCH A console and a ROUTER A and ROUTER A console. and der is a multiple q/a.

i dont know if this question needs a configuration or just answer the multiple question.?
CAN SOMEONE WHO CAN EXPLAIN THIS MORE CLEARLY ?

Just got home, passed! Even with one of the sims locking up on me (and I had all of the answers ready to go!), that would have put me 900+.
Make sure to know the commands for the Dubai router sim, it does not show up automatically!!!!!
Show frame-relay map
Show Run , will produce the info you need! This practice test is over 90% accurate.

Passed today!!!! 916/1000. Thank you so much

I passed yesterday with 986. I dont know if i have enough time for the ICND2 (640-816) until 30 sept.:((

What is the best matterial INFO for ICND2?

@Netking Ok sir i will DL it. i didn't change my sched. my proctor do , anyway. ok i'll focus on the new one. thanks again.

pass with a very high score!!!

$ chris bryant trainsignal videos and mp3s. i cant read a 600 page book, but i can watch thousands of hours of videos and absorb all the info by brainwashing myself. i watched the entire series 3 times and listened to them 5 times which was severe overkill and not necessary to pass.

$ quick reference sheets - read it once

$ official cert guide - used only as a reference - i only read half of chap 1

$ boson netsim 8 (lab, lab, lab!!!)

$ packet tracer and lab some more!

$ HeavyMod.271q.vce and Anonymous.271q.vce until i was getting 1000% every time. lab out drag and drop questions as much as possible and get really comfortable with them. you dont wanna panic on a simulation during the exam with 3 minutes left and more questions to answer. on the real exam i got about 5 drag and drop / simulations. the sims took me a long time. but having practiced them helped me keep my cool and work through them and make up for lost time on multiple choice.

i over studied, procrastinated, got lazy, partied and took 4 months to do what i could have done in 1 to 2 months - easily. it's all about how much time you devote to mastering networking. i got distracted a lot with facebook, youtube, movies, girls, and getting drunk. but once you waste enough time and you see people that started after moving ahead of you, then hopefully you start to wake up. if it's not gonna make you money or make you better, don't do it. focus, study, take time off when yo need it. but get back on track asap. whatever you do, don't stop! don't ever stop studying!!! ccnp here i come.

@Yves,
Man Why did you change your schedule, don't get confused keep on focus on your study, as the clock is ticking, and there is not enough time for September 30th. Take what ever you've been studying. But I will suggest to take new ICDN-1 which is (100-101), it's very easy, download it from here, there are only 105 questions to study, and then take ICND-2 (64-816) I'm going to take this Monday. Good luck.
Stay in touch and let me know how it was.

Hi can anyone HELP ME ? my question is do i need to focus on the old (ICND1and2 640-822and 640-816) or should i Focus in this new one (ICND1and2 100-101 and 200-101) ? but my exam details are these :

640-822: Interconnecting Cisco Networking Devices Part 1
640-816: Interconnecting Cisco Networking Devices Part 2


PLEASE HELP ME. PLEASE REPLY. THANKS

To whomever created this, thank you. I wish I could return the favor. All I can do is pay it forward. See what you started? Take care.

@Netking ! ThankYou so much for this info. Godbless :)

@Yves, There is those Labs in ICND-1 and INCD-2 have only show commands to use and answer those questions, I will recommend to check all Sims questions at 9tut,com. Check all SIMS for ICND-1 and ICND-2. Read all questions and tutorials. Be sure to be good on Sub netting for ICND-1. Sub net, Sub net and sub net, did I say Sub net????

hello can some body answer me ? i taking exam this comming friday. is there any CONFIGURATION during the exam for both ICND1 and ICND2 ? or What should i focus? on the simlets or in configuration? Thanks in advance.

@ Tuna..that is great..glad you passed!!! Congrads to everyone!

Hi everyone, please be advised that some of the questions are also from the new ICND 200-100..i.e. the new ip(s)..and some of the same questions.

Hi all
Passed the test today, about 80% of the questions are here :)
I got VTP as a SIM, and Frame relay (with show frame relay map and show run) as a second SIM.
there was ne wrong question otherwise undrestand the answers in this dump and you will pass 100%
Best luck to all

hello i taking exam this comming friday. is there any CONFIGURATION during the exam for both ICND1 and ICND2 ? or What should i focus? on the simlets or in configuration? Thanks in advance.

hello i taking exam this comming friday. is there any CONFIGURATION during the exam for both ICND1 and ICND2 ? or What should i focus? on the simlets or in configuration? Thanks in advance.

I bought pass4sure latest version with 220 Q & A.
I studied both Pass4sure and this one and there are some question are in this dumb and not listed in tpass4sure.
I really recommend this.

I passed today..I brain farted on my VTP SIM and just could not get it right. My Test was strange I had probably 7-8 drag and drop questions. score 860

Done 9.9.2013 -> 958/1000
Still actual and about 85% was there. Some config/IP changes in sims. Anyway thumb up and thank you :)

Passed the exam today. Dump very valid. I can see why some people say about 80 - 85%. I used both this and 9tute. so all together i'd say it was atleast 94% of the exam.

@Sami, no new IPv6 questions. For me all the ones I have seen before.

got VTP sim and Frame Relay hostspot. Good luck for all!

Hi all
I am going to take the test after 2 days, is there any new question regarding IPv6?
Thanks in advance :)

I meant to say either one is fine becuase .net routes to .com

@ Tuna..either one is fine...net rotes to .com

forgot to mention drag and drop question has changed problems in dv routing new options added

this is still Valid and passed exam
one simulation on vtp ( 305a already configred and apply configuration on 405a switch make is first addressable ip address, vtp mode client, default gateway)
simlets on frame relay(barcelona as central router) and ospf.

so are you guys using the simms from 9tut . com or .net?

Thank you for the drag and drop I'm sitting my exam next week and this has really been helping my studies

passed today , with score 944, 80% of the questions are from this dumb. good luck for all. There are an ACL drag and drop out of this dumb and 2-3 questions. OSPF lab and NAT lab are from this dumb.

@ Tuna

You will be fine:) Just study both this dump and 9tut and you will do well..let me know how it went..Im sure you will be fine!

@ Dee, I didn't have any sims related to OSPF, but I did have OSPF questions..I also had a new ACL sim..207.40.13.X 255.255.252.0, there is 3 allowed and 2 denied...but I don't remember the question, and I only remember 207.X.13.X...those are 2 numbs of the network that I remember, some of the answers were 207.40.15.X, 207.40.16.X, 207.40.14.X, There was a new question on there in reference to RIPng and IPv6 both ans are FF02::9

I am taking the test next week. I was just wondering if the Sim questions you got on your test where they the same ones from 9tut exactly. With my jub I don't use anyof thisstuff but they want me to be certified. once I do pass the test I will forget most of it in 3 months since I don't use it, I wiould hate to study 9tutonly to fin out them questions are complete=wrong. have you nototiced any nquestind that were war off fromm the 9tutsims

@Kay

did you get ospf sim?

was there any new questions?

This is very valid with 2 new questions, a new ACL question, and subnet question (IPv6). I had VTP, Frame Relay 172.30.4.4, drag and drop EIGRP/OSPF, drap and drop (Exam F, Q11(ACL)), Drag and Drop Subnet, I passed with 9XX, took test on Sept 5 2013. Good luck to all!

Thnx Rene

It asks for an email address to block the leachbots.

It's done to protect the website against malicious attacks.

Does anyone know why they ask for your email now?

bryan from South Africa

was the drag and drop the same as this dump?

Valid Dump. practice your subnetting thoroughly, VTP always there, Frame relay Dubai..S-Amer question, and Drag and drop Company's network solution (Subnetting 73 hosts, 24host etc and serial link address requirements)

This dump is valid.
VTP sim.

I just passed today 916/1000
All questions were from here.

VTP Configuration Sim, OSPF, Frame Relay (dubai..)
Drag & Drop VSLM, OSPF

100% VALID!

I just passed today
got 930 more than 90% questions are from this.

Passed today, dump is valid about 85% used this and 9tut

Today i passed. VTP simulation. a lot of MP Qes and subnetting!

Good luck

Becareful there are a few wrong answers in this test.
There's one question that asks what "No Log in" would do if applied to the VTY lines, the correct answer on this test is (gives infinate IP addresses) but that is wrong, it would not allow Telnet access similiar to no password being set.

There's a drag a drop question that states a Router is not a VTE rather an LMI device which of course is wrong.

Passed my exam today with 986/1000, this dump is 80 % valid..highly recommended. Good luck to all those who still have to take their exams.

passed today (23/08/13) with 888 made a few silly mistakes but every question and drop and drag is in there

took on 8/20 and passed with a 972. Dump is valid.

Passed on the 19th August with 902 :)
The dump is 85% valid but I would check out 9tut for simlets and tests also. Good luck.

Hello world!!! Do you guys also experince problems with accessing the ICND 2 section on 9tut? Your reply will be highly apprecaited.

Passed today with a score of 916 after two weeks of studying. I primarily used 9tut to become familiar with the labs, CBT nuggets, and read the ICND2 cisco press book. Good luck to everyone else who is soon to test. This dump is good to go by for preparing for the test but ensure that you know why the answer is correct.

This dump is correct. I got in 1000, he did not expect such a result. Preparing a textbook, this dump and 9tut. There was a lab for vtp, Frame Relay. 90% of the questions accurately matched. Good luck to everyone

This dump is valid. I passed my exam on Monday (916)

Thanks Michael that makes me feel better as I sit the end of August!

Just wrote my ICND2 today, and i got 902/1000. all the sims are the same as in this dump.90% of the questions are as is in this dump. Please use it, it will help as it helped me. Good luck to all. This is extremely valid.

Please tell me, I think that drag and drop is not the right answers for Q16 Q19 Q28

I just passed this today in Netherlands
80% questions are the same 930 points

exam still covers about 75%-80% in US. took it this weekend.

Can anyone else confirm if this is valid in the usa still?

Passed ICND2. Almost all questions were the same. Lab on VTP Sim. I don't remember the other.

I believe this is the save VCE that Majrin used.... and made from heavymod (but with working sims that Maj. put in).

I think you're wrong pkacisco. Switch D has a lower priority and a lower MAC address than the other switch with the same priority. Based on your own statement, that makes the answer D.

exam d question 12 is WRONG!!!

switch with the lowest priority is the the default root bridge and if the default priorities are the same then it goes to the lowest MAC address.

answer is actually B

I just passed the ICND2 exam todat with a score of 950.
98% of the questions were the same

Telling me tube 45 questions --- I inform you that cambiaro any questions on my exam and I call support to find new questions . No new esenario OSPF with 4 questions, and there are two new drag and drop and new questions and my result was not very nice 667

hello, i'm taking this test in a couple of weeks , is this dump still good?
thx.
utzs

Passed to days ago. 930/1000
Very valid !!!
Thanks to all !!!

Drag and drop Q28 Q19 Q16 are wrong, están malas para que las arregles :)

@nuwman yes sir.

majin are u sure ? thanks for the drag and drop

this is the valid.

i have just tested, thank's for the drag and drop, it's more easy to practice :)