Pass Your Cisco 640-554 Exam Easy!

Passed today 979 points,all questions were from Christine
with https://www.youtube.com/watch?v=kyolMpIofOY labs.
For lab question “For which class map is used by the INBOUND rule” look under
CONFIGURE -> ROUTER -> ACL -> Firewall Rule (There you see the INBOUND Rule)

@khaled saleh
What about your exam?

Honestly the best way for you to study for this exam is by using Cisco Networking Academy materials with either GNS3 or Real live routers. it teaches you all you need to pass, so that if you even use a wrong dump; you would still pass the exams because you already know the basics.

@SocalGeek, please kindly assist with the pass4sure you used for yours.. Will most appreciate it...Prepin to take the exam soon..Didn't pass it 2weeks ago because this dump was not vaild... Please help...

i will do the exam in 22 April could you help me

Got 888/1000 and FAILED, pass mark is 898... why so high? Dumps are not valid

@SocalGeek - could you provide questions from pass4sure?

Passed the exam on Apr7, 61 Questions, I scored 969 using P4S.

This dumps are not valid. My exam had 61 questions out of which up to 27 were not from here. So many new questions which would rattle you. The passmark set by Cisco was 898. Why would cisco make it real high... Working towards taking it again soon.. Will not be discouraged or demoralised.

who is
ALCON, just FYI-P4S Their updated braindump. There are now 187 questions in the pool.Please any one can Provide the valid dump

ALCON, FYI- P4S just updated their braindump. There are now 187 questions in the pool.

can anyone help me to download the vce file ASAP.thanks

these dumps are valid for pass but not 100 percent . i have passed on 21 march with 958 marks...

I attempted the exam today and I failed with 20 marks. Many new questions in the exam as mentioned by Julene below.

Many questions were from previous dumps too but the one which were new made me failed this exam. I even knew the answers to many new questions but something still went wrong. Alassssssss. Now again have to submit the fee. :-(

MARCH 28 have conducted the review ,
61 questions and totally changed , someone with new questions
New questions:
- NTP + ACL and CCP HostSpot remain equal
- What’s the accces-list purpose in an VPN site-to-site config? (traffic to be encrypted, traffic to be allowed, etc..)
- There was a question showing two complete vpn site-to-site configs (one config per peer) and you have to guess what’s wrong and how to solve it.
- Lot of questions regarding CCP screens, such as what CCP screen would you use to configure a new security policy?. What CCP screen would you use to add a new AAA server? and so on..
- Radius and Tacacs+ drag and drops have been moved to multiple choice questions. One of them ask for what are the Radius properties (it uses UDP, encrypts the password only and is a standard protocol) and there’s another one asking for TACACS+ properties ( uses TCP, encrypts the entire packet and is cisco property).
- protocol numbers for ESP & AH
- question on Private VLAN- what it is
- IPV6 access-list features
- Purpose of ACL in IPsec
- how to protect CAM table overflow question
- What is used for controlling access to cisco appliances(NAS, AAA, RADIUS,TACACS+) as options.

Probably a lot more new questions than that.

MARCH 28 have conducted the review ,
61 questions and totally changed , someone with new questions
New questions:
- NTP + ACL and CCP HostSpot remain equal
- What’s the accces-list purpose in an VPN site-to-site config? (traffic to be encrypted, traffic to be allowed, etc..)
- There was a question showing two complete vpn site-to-site configs (one config per peer) and you have to guess what’s wrong and how to solve it.
- Lot of questions regarding CCP screens, such as what CCP screen would you use to configure a new security policy?. What CCP screen would you use to add a new AAA server? and so on..
- Radius and Tacacs+ drag and drops have been moved to multiple choice questions. One of them ask for what are the Radius properties (it uses UDP, encrypts the password only and is a standard protocol) and there’s another one asking for TACACS+ properties ( uses TCP, encrypts the entire packet and is cisco property).
- protocol numbers for ESP & AH
- question on Private VLAN- what it is
- IPV6 access-list features
- Purpose of ACL in IPsec
- how to protect CAM table overflow question
- What is used for controlling access to cisco appliances(NAS, AAA, RADIUS,TACACS+) as options.

Probably a lot more new questions than that.

I am having the exam in second week of the April, is these dumps are valid? From other posts it seems that the dumps have been changed from 24 March, Can any one help us with the valid dumps?

Hi guys
The dumps are not valid at all
I failed today
Wait for the next one

I am not able to open this file. Pls any one can suggest that which version i should use to access this.

I am having the exam in second week of the April, is these dumps are valid? From other posts it seems that the dumps have been changed from 24 March, Can any one help us with the valid dumps?

Alhamdulillah.. Passed today in kuwait with 958. Dumps still valid. One new question in firewall section. Lab NTL + ACL. Hotspot questions same but different answers. All MCQs answers shuffled so dont memorize blindly. All the best for future test takers.

Passed today with 900, still valid, all questions from here. Lots of drag and drop and NTP scenario. Good luck all!!

Passed today with 9xx score. Dump still valid 100%

Just took this exam the other day and passed with over 9XX marks. 100% Valid. Labs: NTP+ACL

This dump is 100% Valid. Today I have passed with 958 marks.

Thank you very much for the great support EXAMCOLLECTION

Passed today 969, still valid

Passed today 969, still valid

Passed today 969, dump still valid.
Labs : NTP+ACL

dump is 100% valid. passed today... :)
70 questions and all of them were from this dumps, simulations were of ccp(NTP,ACL.)

completed got 948. ccp and ntp lab sim came.
in ccp for question 1, In nat rules I saw (no mapping)acl 172.25.233.x.
question 2. only 2 policies were available and i cannot see the protocols.
I dont know whether I made a mistake.
rest of the objective question came from the dumps only. very easy.

Dump still 100% valid. Passed last week in UK. Good luck!

This dump is still vailed!!!I passed this exam. All 70Q is included this. Also, ACL+NTP simulation, drag & drop Questions are same with this vce. thank you! ^^

This dump is still 100% valid.
The SIMS are still Question 120 & 121.
One piece of advice regarding question 41:
In the exam they only showed the white screenshot and not the black (the dump shows both). So for that question you REALLY need to have the answers completely memorized since you won't be able to get any hint on how to answer them on your own. I am not sure if that was a bug in my exam.

to solve NTP + ACL Simulations Question is http://www.youtube.com/watch?v=kyolMpIofOY.

@everybody
for a Lab which we have to enter cisco as a password, what should I do ? just write show run command and then type password, finally enter the configure terminal and so on ?
thank you

Is this dump still valid?

wanted to know how many sims comes in the exam and most likely which one

I took the exam today and got 927. all questions are from this dump..
this dump is valid to pass the exam.
thank you rajeev.

taking exam on friday...is ths dump still valid?

Took the exam today and passed with a 969/1000. Every question was on this dump!

Still valid. All 70 question was in this vce. Pass this test today.

I just took the exam yesterday and passed with a 948. Would likely have been perfect except the CCP lab portion of the test wouldn't complete and I ended up having to skip to get it to move on. The test facilitator couldn't help me with it. Got out of the test and logged back in and the new computer was stuck in the same place. No way to save therefore the auto-rule couldn't complete. I used this and the Misha version from 2012 as the multi-drop questions work better on it though it doesn't have every question that this one does.

Dears ,

Which Lab coming into 640-554 exam?

Passed this exam last week. Every single question was on this dump, so it is still valid.

Is this dump still valid?

Can anyone please tell me, Is this dump still valid ?

this test is still valid, all the items here were on my test which i passed with 950.

This Dump is Super Valid 917/1000. Study this dump and you wont fail.

its having 139 question only, is that all

passed to day! This dump still valid. Thank you so much.

Is this dump still valid?

This dump is still valid in Hong Kong.
pass with 8xx

Thanks for everyone telling me the dump still valid, I have pass the exam with almost full mark, so till today dump is 100% valid actually.

Dumps still valid...cleared yesterday with 907.
Cheers!

Passed today with 917. Damp is 100% valid.

hi ,

i have ccna 1,2,3 (academic not associate ) it can be as prerequisites to ccna security ?

This dump is 110% valid, just passed my exams now thanks to all

dumps still valid ???? Please let me know as i m planning to give exam in next two days ???

Does anyone know if this dump still valid ????

passed with good score. Misha and Rajeev(or Noam) combined are 100% valid. Misha is the most pleasant to use. Just a few qs hav wrong answers

Which two protocols enable CCP to pull IPS alerts from a cisco IPS router?
Correct answer -> SDEE and HTTPS

Also the network life cycle correct is order is clearly explained in the OCG chap 2 first page

Does anyone can tell me, how much passing score are required for 640-554...
Mr. Rajeev I am not sure about the validity of this dumps... new file should be uploaded...
Thanks

could any one send for me lastest Dump along with NAT with CCP lab

@ my email : latif_rao@hotmail.com

Thanks and highly regards...

can some one tell me if this still valid?? and where can i find the lab questions. thanks!!!!

Hey guys. Does anyone know if this dump still valid?

could any one send for me last Dump & NAT with CCP lab

at my email : aymbl100@gmail.com

please please I'm waiting

where I can get the LAB files, please help me ASAP

where can i find practice lab files

Really Alvin??? Go buy your voucher like everyone else....

alvin from Singapore - Dec 01, 2013 Report Spam
Hi All,

Can you give me voucher for this exam

Tnx in advance for those people share it

is this valid in india?

is this valid in india?
where can i see videos of simulations?
do i need to refer to another dump?
Please help urgent

hi friends ,,,
is there is any new vcs for this exam ?

Passed today with 969. Damp is 100% valid. All questions from damp. Lab (NTP+ACL) and Simlet was in CCP.

Yesterday I pass the exam, 100% still valid. NTP lab, CCP Hotspot.

Flames, your first 2 or three access lists are "permit" statement for the traffic in question. Once a match is made in one of these first three, the action executes without continuing down the ACL list. So technically, the bottom ones never get acted on because the permit statements precede them. Thereby allowing all the traffic in the answer to proceed even before the other ACLs are read. So, the permits on top essentially override the denies on bottom well before the implicit deny at the end. I hope this helps and addresses your question. Good luck, fella.

I got 917/1000 today. Dump is still valid.

This dump is still valid. 917/1000. Thank you!

Today I got 927/1000. Thank for all of you. Now I want to sit on CCNP (R/S/T) and CCSP, Need your help. I like examcolleclion very much. Thank you all once again. The CCNA Security 640-554 Dump is 100% Valid.

Q139 is about the old SDM, so it's useless for this exam. Otherwise, the dump is valid (passed yesterday)

Tuxx, Could you tell me where you got the CBT nuggets from Keith. I counldn't find a download here at examcollections. Thanks

Hi guys, I Just took the exam today Frm South Africa Got 97.4%. I Used CBT Nuggets by Keith to study and Noam & Rajeev dumps to practice (same set of questions). So u can use either one. Qz are 100% valid. Sims include. NTP nd ACL's via CCP. CCP navigation is very important as U wil also use it to answer Hotspot Questions based on ZBF. Know this and U wil pass the exam. Hope this helps. Goodluck!!!

Hey everyone. i appreciate all you guys for the great post and works you're all doing. i will be testing on Tuesday 05-11-2013. Pls i will like an advice if this vce is still valid. Great to you guys

Hola ARS, tengo una duda con el NTP y ACL, al termino solo es asociarla a las interfaces en este caso donde esta el CCP como la Inbound (interface) y la outbound hacia el servidor? Saludos

valido en españa 100 % lab ntp.acl y el CCP hotspot no funcionaba

passed yesterday, still valid. Thanks!

Hi can anyone please explain this. I dont get it.

Which traffic is permited by this ACL?

access-list 100 permit tcp 172.26.26.16 0.0.0.7 host 192.168.1.2 eq 443
access-list 100 permit tcp 172.26.26.16 0.0.0.7 host 192.168.1.2 eq 80
access-list 100 deny tcp any host 192.168.1.2 eq telnet
access-list 100 deny tcp any host 192.168.1.2 eq www
access-list 100 permit ip any any

Answer: Any TCP traffic sourced from host 172.26.26.30 destined to host 192.168.1.1

Dump still 100% valid, just took my exam today.

This dump is still valid. Took my exam on Oct 18th and passed.

Hi,

Cleared the exam, got 938/1000. Dumps are totally valid. Just note the orders of the answers are different. If you are prepared, its a piece of cake.

you are right its no longer valid in Saudi Arabia

i passed my exam now . passed with 979.dump still valid.thank u for all

this dumo only 20% valid
Today i failed sooo many changes ,30 new question!!

Passed with 979 dumps are valid. there are slight change in language and options . Also CCP hotspot data has changed so do not mug up the hotspot question. Just remember steps that how to open particular thing in CCP and u will good to go . All the best

This dump is 100% valid. I pass the exam, 958.

@Stil_Waitin,
I'm taking my exam tomorrow, so don't take everything I say as 100% fact, it's just what I used to prepare (you may also already know some of this). I went with the 7200 and a 15.0M image in GNS3 because it is in the list of routers that supports IOS IPS (I don't think it's incredibly important for the test, but it's good for learning and experimenting with the features if you plan to go on to the CCNP-Sec). You'll have to do a search for specifics, but in general you can create a loopback interface in Windows (not on the router) and you can connect CCP to the router in GNS3 over the loopback (this is MAJOR because you need to learn where things are in CCP for the exam). There is also information out there about setting up an ASA with the 8.4 image in GNS3 and using ASDM over the Win loopback as well. As far as the test goes, there is very little that I've seen that has to do with switching that wasn't covered in the CCNA R&S..just know some general STP info and how to setup port security with a max MAC limit and a 'shut' violation and you should be good (the 3640 image in GNS3 with the 16-port ether-card doesn't do port security, at least not with the image I have). If anyone sees any misinformation here or has anything to add, please mention it for everyone's benefit.

guys hello..are this 140 questions enough or we must study plus ccna answers.thnx

What are the routers and switches needed to practice these labs in GNS3 please reply soon..

the order for drag and drop is important? we have to sort its in the correct way?
in other cve the order is different and the correct is correct too
1) ipv6 drag and drop - it is important the order of the items in the answer?
2) symmetric and asymmetric algorithm - it is important the order of the items in the answer?
3) ips/ids it is important the order of the items in the answer?
4) ike phases? . we have 2 drag and drop about it
5) initiation.. implementation .. acquisition.. ?

thanks to all, please help me guys

Dumps still valid. cleared my exam today with a score of 958. Study the dumps and keith baker nuggets and videos. that should suffice. Couple of things

1) CPP does not have a deliver button,so do waste your time looking for one. You would just have to just configure the CCP wizard.
2) As explained earlier , almost by everyone, the options are not in the same order. so learn the answers to perfection.
3) The order of the DND is not important as long as they belong to the correct phase.

Lab question 138 - how to configure fa0/1?

Passed!.Lab Sim + DND + Q . Still Valid . thanks everyone from examcollection and the person uploaded these files. next.. CCNP .thanks guys.

guys. i took the exam today and the dump is 100% valid, i scored 9xx. the question i asked earlier showed up in the exam!! :s. good luck to exam takers

thnks exam collection i pass my exam today all question from this dump still valid
good luck to all
thanks very very much

guys, can someone explain me the below question, i can't get it

A Cisco ASA appliance has three interfaces configured. The first interface is the inside interface with a security level of 100. The second interface is the DMZ interface with a security level of 50. The third interface is the outside interface with a security level of 0. By default, without any access list configured, which five types of traffic are permitted?

DUMP Valid 100% . Passed the Exam on 01/09/2013. Got the Same Labs too.. Thankx a lot

hi all ,
pls i have some questions about real exam :
1. for drag drop quetion is the order important for all questions and if not which question need correct order.
2. for simulation in exam as i see in this great site and from the comments there is two simulation ( NTP configaured with CCP & port security confuguard with CLI ) is there any other simulations ?
3. for Hotspot question there is one question for ACL & Zone with multi choice is any other type of questions int the exam ?
thank very for this great site and for all comments , pls i'm waiting answer from who take exam .
regards , My friend

Wonderful dumps guys, I passed. Well done. Simulations appears as they were. Thank you!!!!!!

Vaild dump but the Pass 4 sure dump is a little more accurate and some of the answers are incorrect on this one. But it will get you by.

Dump is still valid, passed today.

Gyes. Dums are valid.. passed today with 969 score. Simulators are same NTP-Access list and CCP.

Kindly use Cisco.Pass4Sure.640-554.v2013-02-17.by.Noam.137q.vce
This has most correct answer.
Few questions are wrong.. kindly correct those.

Dumps are valid.. Pass today with 980.
CCP labs answer is not same check the steps

Hi guys!

where can I find lab practice site for CCNA_Seccurity?

and what is the pass mark ?

Thank you, will really appreciate your answer

SDM is no longer used. CCP took its place. Seems like the SDM questions were from the 553 test

Passed yesterday with a score of 902. Dump is absolutely still valid!
Thanks a lot for have shared it :*

Passed today with a score of 897. This dump is still valid, answers are not in the same order of this dump so study questions and answers well.

Thanks for providing this update.. just thought I'd mention Q88 should allow five correct answers to be selected.. however in this and previous updates it only allows one! Thanks again!!

100% valid - high 800.

awesome dump, fixed the drag and drop questions.

I think ASDM is in use not SDM. The last question (Q139) uses SDM to do the configuration

I have no problem opening it. the previous uploads were till 90% still valid, just some modifications were there, this 2 weeks ago.
I suppose this one is also accurate :)

File is corrupted.Not able to open.