|
||||||||||||
Home
Tutorials
Exam Formatter
Upload
FAQ
Contact
|
||||||||||||
|
Practice Exams:
Microsoft
Cisco
CompTIA
RedHat
Citrix
|
||||||||||||
|
HP
IBM
CheckPoint
CIW
LPI
Novell
VMware
CWNP
EXIN
Other
|
||||||||||||
|
||||||||||||
|
All from dumps
Labs are LACP, AAA, EIGRP
I passed today with a 967. I have to say that even with these dumps, I still learned a ton during the whole process (especially) when practicing the labs.
The labs were exactly as everyone stated:
MLS with EIGRP
http://www.certprepare.com/mls-and-eigrp-sim
LACP with STP (slightly variation)
http://www.certprepare.com/lacp-with-stp-sim
AAA Dot1x / Radius
http://www.certprepare.com/aaadot1x-lab-sim
HSRP HOTSPOT
http://www.certprepare.com/hsrp-hotspot
I used Boomish exam A, B and C, and the certprepare.com labs (links above).
Hope this helps. Good luck everyone!
You are welcome :)
@Scooter
Thanks for confirmation and clarification :)
@ Ebrahim Hasan
You are welcome bro ;)
Mohamed Ali from Egypt
Dump 100% valid
Labs:
1. MLS + EIGRP
2. AAA dot1x
3. STP + LACP
4. HSRP HOTSPOT
@ Mohamed Ali
and
@ Scooter
http://examdump.weebly.com/ refer this site
What do you mean? Are you using VCE program?
I wouldn't take that chance if I were you. Supposedly, you get partial credit
for the SIMs even if you don't configure the whole thing perfectly.
How would you feel if you get a 780 because you skipped a SIM. They are actually not that difficult especially if you practice them in packet tracer.
The only one you really need to practice on real Cisco gear is the AAA dot1x because you cannot do this even on ver 6.0 of Packet tracer.
Mohamed Ali is correct. If you omit the group number on the standby command,
the default HSRP group number is 0.
Hence, the correct answer is --> B.
So if there are 40 questions that can give you 1000 points, each question is 25 points? If so, then I could skip the big LACP SIM question and concentrate on the rest?
2nd choice is the right one , the The HSRP MAC address will be 0000.0c07.ac00 , and I have tried it on real lap.
The following command was issued on a router that is being configured as the active HSRP router.
stanby ip 10.2.1.1
Which statement about this command is true ?
A. This command will not work because the HSRP group information is missing.
B. The HSRP MAC address will be 0000.0c07.ac00
In this dump, answer is B. I saw in another dump answer is A. Which is correct answer. In my view A the correct one.
The sims are:
1) LACP with STP
2) MLS with Eigrp
3) AAA Dot1x
4) HSRP HOTSPOT
Copy running-config startup-config is not running but the config are saved
Exam was so easy,i have done in just 45 minutes,
Labs are same
LACP with STP
MLS with Eigrp
aaadot1x
HSRP hotspot.
All from boomish dumps exept two new questions but was so easy,
Thank u boomish and certprepare..
All the labs that I had have been illustrated in Boomish's dump and I still agree that this is a valid dump. Its not worth wasting time studying 300 extra questions and understanding the reasoning for the sake of two to three questions.
Treat the dump as an indicator as to how much you know and understand and how much more you have to study.
If you have any questions, please do ask and I will come back on the forum later today and tomorrow to answer any question the best that I can before I start learning routing!!
Later people!
I am going to take this on tomorrow,
Pray for me guyss..
Thanx
hey feroz, i got route dumps from Igor...
http://www.examcollection.com/cisco/Cisco.ActualTests.642-902.v2013-02-12.by.Igor.395q.vce.file.html
A few new questions and sequence were changed. Don´t study answer in order.
Be careful when you make sims. IPs are different as Eigrp number.
Regards,
Today I have written the 642-813 exam passed . 989/1000
AAAdot1x, MLS eigrp, LACP with STP - sim
My VCE mark wrong if it not put in order...:/
theghibha@gmail.com.
this dump is still valid,refer the SIM from certprepare.com and LACP with STP lab switchport trunk encpasulation dot1q not supported (skip this command) and configure for port channel for both swA and SWB....
Can you share dumps? I emailed you but got a failure delivery notice. Can you email me instead at appleavelino@yahoo.com?
Special thanks to Almighty ALLAH & My Family & My colleagues.
Today, I passed my Switch exam under secure 901 numbers.
Total 43 questions
HRSP 6 questions
5 Drag & Drop
answers sequence were changed so read very carefully
exam was very easy just IP address change in EIGRP process ID change 60501 and IP address 172.16.2.0 swicth host A 192.168.1.32 host B 192.168.1.64 no need further configuration.
AAA labs were same same like certprepare.
STP lab were little bit change vlan 1 address already configured so no need to assign again ok and others things must be use these below command but u have to check configuration .
interface port channel 1
switch mode trunk
switch trunk native vlan 99
swicth trunk allowed vlan ,121-23,99
remember use these command on both switches
If anyone need my help regarding the exam
contact me without any hesitation
Waa1986@hotmail.com
skype ID waseemawan1986
Thanks Allah Hafiz
Can i paased this exam only using boomish dump with
1-MLS with Eigrp
2-LACP with STP
3-AAA Dot1x
4-HSRP HOTSPOT
Please suggest,i am going to take this exam tomorrow
Thanks in advance
I have a question. Can you come back if you need it? I would like make labs questions when i had finished teoric questions. Is it possible?
Dumps 100% valid and labs are those one...
hey Dune83, exactly these labs...the same...
Now im going for TSHOOT and get my CCNP :)
I´m preparing to this exam. When people say that labs are:
1-MLS with Eigrp
2-LACP with STP
3-AAA Dot1x
4-HSRP HOTSPOT
They are talking about same labs of certprepare.com?
1-MLS with Eigrp http://www.certprepare.com/mls-and-eigrp-sim
2-LACP with STP http://www.certprepare.com/lacp-with-stp-sim
3-AAA Dot1x http://www.certprepare.com/aaadot1x-lab-sim
4-HSRP HOTSPOT http://www.certprepare.com/hsrp-hotspot
Or others?
LABS (www.certprepare.com)
1-MLS with Eigrp
2-LACP with STP
3-AAA Dot1x
4-HSRP HOTSPOT
answer is. The default is set (B). this question also came in the paper.
sequence of all the answers are change. Not a single answer is coming in sequence in paper. Kindly read carefully.
LABS
1-MLS with Eigrp
2-LACP with STP
3-AAA Dot1x
4-HSRP HOTSPOT
One question is change in HSRP hotspot. question having answer 95 is not coming. Answer of the new question is 90.
LAB
MLS + EIGRP
LACP + STP
AAA Dot1x
HSRP HOTSPOT
all questions were from Boomish. My first question was the LACP-STP Sim :D anyway i had also dotx1, MLS with EIGRP, and the HSRP hotspot.
Boomish is still vaild.
Thanks ExamCollection,certprepare and everybody.. peace
Question
When you enable port security on an interface that is also configured with a voice VLAN, what is
the maximum number of secure MAC addresses that should be set on the port?
A. No more than one secure MAC address should be set.
B. The default is set.
C. The IP phone should use a dedicated port, therefore only one MAC address is needed per port.
D. No value is needed if the switchport priority extend command is configured.
E. No more than two secure MAC addresses should be set.
Answer in Boomish: B
Naswer in other all dumps & sites is E.
two hours ago i pass the exam all the question was from this dump it is still valid
255.255.255.224 aka /27 is a .31 wildcard mask. That was the only mistake that I made which I can think of. From the lab itself, it asks for "specific subnet." I guess for the purpose of this lab, .31 had to match what is being asked.
My production network uses the classful wildcard mask.
What was wrong with
net 190.200.250.64 0.0.0.63
eigrp 65010
net 190.200.250.32 0.0.0.31
net 190.200.250.64 0.0.0.63 <--- just realized this was my mistake and got 50%
net 10.10.10.0 0.0.0.255
no auto-summary (not needed to complete exam)
:*(
I could not believe it! I swear, I got all the commands right and was able to ping the server at the end.
eigrp 65010
net 190.200.250.32 0.0.0.31
net 190.200.250.64 0.0.0.63
net 10.10.10.0 0.0.0.255
no auto-summary (this is not needed to complete the lab)
Also, the "copy" command was not available on dot1x and LACP labs. DO NOT spend so much time trying to find the way to save it the config.
New Question:
If you have access layer, distro layer, and core switch, where would you create the SVI? I answered distribution switch.
Really upset with 50% score on MLS EIGRP lab.
Resources used to study:
-CCNP Switch Simplified book
-CBT Nuggets
-Catalyst 6500, 3500, 3700 PoE switches
-Cisco RADIUS with 802.1x mab implementation
I believe in hard work as well. Took me 2 yrs to prepare for the CCNA due to fear. Just wrote my np route 2 days ago. I bought the np videos from the Bryant advantage but never got it. I used cbt nugget and Wendell odom and of course gns3. I will have to use packet tracer 6 for my switching exam.
Scooter, thanx a lot for all the interesting details in ur Cisco journey.
God bless u and continue to work hard.
I should also mention that the total investment also included 2 laptops, tons of modules (WICs, etc), cables, Cisco Press books, exam fees for the 640-802, 642-902, 642-813, I also bought Chris Bryant's CCNP video course (yes I paid) The only thing not included is the blood, sweat & tears I have invested learning this stuff.
Anything Unified, Wireless & Security is very hot in the U.S.
I wish you good fortune in your journey.
Omg, so much money and equipments. Nice. $9k, is what I call an investment in ur studies. I don't c why u won't get a 100% for the exam.
Will this be ur first NP exam? What's big in the u.s security, voice or wireless?
Switches
2 x 3560 (these are layer3 POE switches)
2 x 3550
3 x 2950C-24
Routers
1 x 3640
1 x 1841
3 x 2621XM
4 x 7962 VoIP Phones
1 x 7906G VoIP Phone
1 x 7921G Wireless VoIP phone
1 x Aironet 1042 Controller-based Access Point
All-in-All, I have invested about 9K USD
I have 642-813 scheduled at the end of the month, I'll post the results after I take it. I finally looked at the dump earlier this week & I've been scoring in
the 90s w/o any memorization ... I also know the sims really well and can re-create them from scratch.
U r truly lucky to have those gear. I did all my routing lab exercise on gns3 and I was hoping to find something similar. And now I have to whip out cash for switching.
When r u righting the switching exam?
.
I mean how is a student suppose to learn VRRP, GLBP, private vlans, etc.?
Both PT and GNS3 lack features in the switching arena. I;m very happy that
I have real gear.
Equipments cost a lot though. Any new developments in GNS3 with configurable
Cisco core switches?
need equipment if you want to learn the stuff.
Ive got 989
Good luck
Any of u using an emulator for labs or just using cisco packet tracer?
its a real shame GNS3 doesn't have the switch equipment like it has router.
please, help with any suggestions as to how to get sum lab work done in prep for this exam.
May I ask how many questions do you get in an exam? Do the labs comes in between the questions or at the end of multi-choice , Drag/Drops Question?
Many Thanks
sequence change, so read carefully and then ans.
LACP with STP,
MLS and EIGRP,
AAAdot1x LAB SIM
HSRP HOTSPOT
PLZ PLZ PLZ to HELP :
there are two question format for the LACP with STP & EIGRP & STP in this dump, which one came to you guys who passed the exam ??
///////Please advice//////
Labs:
1. MLS + EIGRP
2. AAA dot1x
3. STP + LACP
4. HSRP HOTSPOT
IP Addressing and Subnet Masks Changes in the Labs so be smart in that regard, Check EIGRP AS number as well.
Big up to Boomish.
Labs: AAA dot1x, STP & LACP, EIGRP & MLS & HRSP Hotspot.
All multiple questions were from this Dump, I didn't got sumthing new or out of scope of this dump.
Thanks to Boomish, Wish you all the best out there.
This dump still valid.I passed with 879 .Thanks boomish.
LABS: LACP , AAA dot1x , EIGRP with MLS and HSRP hotspot.
- Lab: EIGRP with MLS and hotspot are a little different
- Choices: Change in the order of sentences.
THANKS TO ALL
I got one new ques, but its easy & AAA dot1x, EIGRP MLS, LACP.
for EIGRP MLS lab, IP's were changed it tooks 45 mins to calculate Wildcard mask (I am not good at it) so Try to do the lab with another IP probably your own IP.
If you want any help "sridhar.bb@hotmail.com"
SIM is 99% Valid.
The sims are:
1) LACP with STP
2) MLS with Eigrp
3) AAA Dot1x
4) HSRP HOTSPOT
To avoid mismatch error on LACP with STP sim, enable the command switchport mode trunk only in SWITCH-B
You need to understand the concept to understand the simulations exams. GOOD LUCK!
Perth-Australia
Check for VLAN Mismatch error in LCAP lab rest are same
LAB: AAA dot1x , EIGRP with MLS and HSRP hotspot.