Cisco.ActualTests.642-813.v2012-06-12.by.Glop.154q.vce

Peri

Wednesday, January 30, 2013 6:03 AM UT

indeed, this is absolutely valid now.. 90% of the Qs (enuf to clear) were from this dump.
I just cleared it couple of days back, with the help of this dump too..
Thanks Glop for the great work & help!!

poekong

Monday, January 07, 2013 4:33 AM UT

Hi I Passed with 923.

This dump and Cisco.ActualTests.642-813.v2012-06-12.by.boomish.154q.vce

are 100% still valid up to today (07 Jan 2013).

Phil

Friday, December 21, 2012 3:24 PM UT

Hi All, passed today with 868 points. got the AAA, LACP and EIGRP labs, with approx 6 DD's plus the HSRP hotspot one. Pretty straightforward and no suprises; Glop is still very valid and thanks for all your help Glop :-)

Willy

Friday, December 21, 2012 12:04 AM UT

Passed today with about 92%
dump is valid. 1 new question.
the same labs as everyone has recently, and also HSRP hot spot
thank you

Greg Graffin

Thursday, December 20, 2012 2:55 PM UT

Passed this exam today 978/1000, Glop or Boomish still valid, MLS EIGRP, LACP STP, AAAdot1x simulation, about 5 Drag and Drop and HSRP hotspot. Thanks Glop, Boomish and Examcollection.

quefro

Monday, December 17, 2012 11:23 PM UT

passed today 100% good questions thankyou very much
super actual

Hummer

Thursday, December 13, 2012 9:41 AM UT

Hi Guys,

Can anybody tell me if there are Wireless qeustions in the real exam. Or is this glob version enough, because i can't see any WLAN qeustions in this version. Please your advice. Thanks in advance

eagle

Tuesday, December 11, 2012 4:54 PM UT

100%still valid thanks to glop just passed with 901 exam , lacp with stp was tough , the interface range command didn't work with me

Steve

Thursday, November 29, 2012 5:06 PM UT

Passed today with 980. All Q's from this. Took exam as recert for CCNP so pretty familir with the concepts. Watch out for some of the Sim, as previous config that I had entered seemed to disappear on a few of them.
Got 3 drag and drops, the SNMP,VTP Design and Network availability one.
4 Labs - Port Security, HSRP HOTSPOT , MLS and EIGRP 2, LACP with STP Sim 2
Thanks for listing. Thats me done for 3 years:)

giles

Tuesday, November 20, 2012 2:26 PM UT

thank you cbu for helping me bra wish you da best

ccnpish

Monday, November 19, 2012 6:00 PM UT

Thank you very much for this dump. 100% valid. 890/1000 = PASSED!. (i got 890, cause i didn't study that much :D).

abc

Saturday, November 17, 2012 4:18 PM UT

In the simulation lab LACP with STP sim 2, it is asked to configure VTP mode of switchB same as switchA. But it is configured in the transparent mode. also Vlans have been asked to be created on SwB but are created on SwA.. can sm1 please clarify. Thanks in advance :)

:|

Friday, November 16, 2012 8:07 PM UT

100% valid.. got a tough exam 5 sim's and 4 or 5 drag and drops.. 912/1000

Thanks Glop!

Pablo

Wednesday, November 14, 2012 10:24 AM UT

I passed it yesterday. Score 969/1000.

boomish and glop 100%

Thank you very much!!!!!

misteryoso

Monday, November 05, 2012 7:20 AM UT

Hi Guys,

when do you think this SWITCH exam will change? is it true that it will change on August 2013?

Paul

Friday, November 02, 2012 10:05 PM UT

The question ..port security..what is the maximun number of MAC add that should be set on the port?

Answer: The default is set

This is correct?????

Thanks!!!

bombs

Friday, November 02, 2012 4:01 AM UT

Hi broma - congrats on passing the exam! what type of vce reader are you using? It seems that I cant open this file. do you have a pdf version of this? Thanks!

broma

Thursday, November 01, 2012 7:26 PM UT

Glop is still valid, I took exam today and passed 912 score. you can find all exams from this dump.

gist

Thursday, November 01, 2012 12:02 PM UT

Dump is valid.Passed yesterday wt 901 points. on the MLS&EIGRP 2 simulations I couldnt pind the server regardless of the correct commands i put. TIP. Once u know that yo cmds are correct like from this dump.just move on I spent 30 mins trying to figure out I couldnt ping the server but I still coulnt find out why.then On the LACP with STP sim 2 i kept on popping the native vlan 98 mismatch thing.even after trying to remove it.i decided to move on .on one of the switches "encapsulation dot1q" will not be assigned bcoz the ios has dot1q by default but on the other switch u must assign it.Remember to master the material first b4 u go for dumbs its for yo own good.Havew agood foundation first. It will save yo job n IT Career.Good Luck all.

SwitchGuy

Thursday, October 25, 2012 1:17 PM UT

If you fail on your first attempt, are you likely to get the same questions and sims in the re-take?

ThatGuy

Thursday, October 25, 2012 7:27 AM UT

Hi Cbu you need to get the latest VCE to open this... Thanks G to the Glop, taking my exam in 4 days, comparing this to other dumps you make them look foolish.

Cbu

Wednesday, October 24, 2012 2:02 PM UT

Hello guyz!!!

Please tell me how do you open this dump, because I have try to open it,using that vce,I was using on CCNA.But it gives me an error(that the file was created using an old vce manager). If someone got a right vce manager please email it at Cbu3008@yahoo.com.

God Bless you

IZIGA

Wednesday, October 24, 2012 1:56 PM UT

Just passed today 24/10/2012 with a score of 923. Both Glop and Boomish still 100% valid. 6 DnD, 6 HSRP hot spot, the labs are the usual MLS and EIGRPsim2, LACP sim 2 and AAA DOT1X.In all I have 43 questions in the exams. See you in TSHOOT to finish my CCNP journey.

Confused

Wednesday, October 24, 2012 4:55 AM UT

I'm a little bit confused with MLS with EIGRP SIM2. Where should we configure VLANS 21, 22 and 23? The question is asking that we need to configure these VLANS in Switch B but you will notice in the answer that these VLANS are created in Switch A. The answers in GLOP and Boomish are the same. Asking help from those who already passed the test. Are we going to just follow the answer? Thanks.

Ivo Bulgaria

Monday, October 22, 2012 6:29 PM UT

Glop is 100% Valid.
Thanks to CBT- Nuggets
Glop Boomish and certprepare.com

Barnabas Amiolemen

Monday, October 22, 2012 2:38 PM UT

The question stated you need SWA to be the root switch for vlans 11, 12, 13, 21, 22 and 23. All other vlans should be left are their default values.
I would have think that the answer should be
SwitchA(config)# spanning-tree vlan 11-13,21-23 root primary
and not
SwitchA(config)# spanning-tree vlan 1,11-13,21-23,99 root primary. And secondly what business do I have with the native vlan? The question did not say we should tag native vlan.
And also the simulator did not accept switchport trunk encapsulation dot1q and I wasted time here with copy run start.
Please, I need help

Barnabas

Monday, October 22, 2012 8:06 AM UT

The dump is still valid I saw the questions there from Boomish but I did not pass because copy run start wasted my time.The command did not work. CISCO should let us know while is not working. Is not fair. Time was agaist me and I scored 770 and the passing mark is 790. I hope to take it again because I just learned that the command is not working. Thanks Boomish

bob

Friday, October 19, 2012 7:37 PM UT

dump is valid. passed with 978 today.

P4PK

Friday, October 19, 2012 12:54 PM UT

Dump is 100% valid. Passed with a score of 912/1000. All questions in this. Thanks Glop!

Tariq Saeed

Friday, October 19, 2012 9:44 AM UT

Passed today with 978 score. Dump is still valid. Lab AAA and dot1x sim, lacp and stp sim2 and mls and eigrp sim2. one new question

any1

Thursday, October 18, 2012 8:26 AM UT

@ every person

whoever is saying glop is wrong or invalid is lying!! i have double verified them and got 1000 the latest dump by glops are :-

http://www.examcollection.com/cisco/Cisco.ActualTests.642-813.v2012-06-12.by.Glop.154q.vce.file.html

dont create panic for no reason!

Will

Wednesday, October 17, 2012 10:26 AM UT

Glop is still 100% valid.
But beware, some of the answers are wrong!
I passed with score of 890, and recognized every question and answered it exactly as Glop suggested but did not get 1000.

I could not do a "copy run start / wr" at any of the labs, but got no idea if I got the marks for them.

Good luck!
Off to Routing for me :)

ziggy

Thursday, October 11, 2012 5:30 PM UT

@Assasin or @Alberto, @who have passed

From which exam group for the multiple choices mostly taken or exact the same? grom Exam group A or B ??

How many question for D&D ? Could you mentionto which question on the boomish or glop actual test for Drag & drop (D&D)

How many question for LAB simulation ? Could you mentionto which question on the boomish or glop actual test for LAB ?

Cbu

Wednesday, October 10, 2012 5:17 PM UT

Hello guy!!!

M taking an exam in 3 weeks time,anyone with valid study material or Ebook,please email it to me at Cbu3008@yahoo.com.

Thank you
Cbu

Lamo

Monday, October 08, 2012 7:45 PM UT

Guys please help
Is there any site containing labs for training ? i mean simulations other than the exam's simulation on cert prepare.i need to prepare for labs to master the topics.
people who passed the exam ,please what labs you practiced

Assassin

Monday, October 08, 2012 8:24 AM UT

Just Cleared with 868

All the Questions were from this dump.

Labs:- LACP 2 , MLS EIGRP 2 & AAA dot1x

Alberto

Friday, October 05, 2012 10:15 AM UT

Just passed today.

The dump is completely valid. All the questions from it. Simulation of SVIs, LACP and AAA.

Thanks a lot Glop!!

tb

Wednesday, October 03, 2012 12:42 PM UT

passed yesterday, valid dump, very very helpful, labs same as others:
-LACP
_MLS with EIGRP
-AAA
-HSRP (hotspot)

great work, thanks very much Glop!

AA

Tuesday, October 02, 2012 9:20 PM UT

Passed Today 1000/1000 Thank You Glop lacp stp , aaa dot1x and mls eigrp (2 New Q)

Rajesh

Saturday, September 29, 2012 9:03 AM UT

Passed exam today !!! Dumps are still valid . Thank you Glop and Boomish.

erwin22

Friday, September 28, 2012 9:34 AM UT

Valid, i passes
was only 1 new Q, given was a full meshed network
access, distribution and core
where to impelemt svi
-----
3 sims (dot1x, lacp, mls eigrp), HSRP simlet, D&D, 1 wireless question
-----
Thanks to glop and bomish

KK

Friday, September 28, 2012 4:47 AM UT

Passed today 28/9/2012 Score 1000/1000 the dump is valid 100%
Lab
1.MLS-EIGRP 2
2.DOT1X
3.LACP SIM 2

Awad

Thursday, September 27, 2012 10:02 PM UT

Passed today 945 the dump is valid 100%

azuz

Thursday, September 27, 2012 12:44 PM UT

passed today,

laps:

-LACP
_MLS with EIGRP
-AAA
-HSRP (hotspot)

glops still valid.

Best

Wednesday, September 26, 2012 4:22 AM UT

This is dump is 100% valid. With God's Grace Passed today
Just this dump is enough

andres

Tuesday, September 18, 2012 10:13 PM UT

This dump is totally valid, I passed today with 987. I'm from colombia, the labs were MLS EIGRP, LACP and DOT1X witch VACL. Many D&D questions, maybe 6, only one of wireless and HSRP hot spot. Thanks a lot to exam collection and certprepare, really good and update questions.

Crispino

Tuesday, September 18, 2012 12:20 AM UT

@tawani, there is nothing more to use, go only through Glop dump and the success is yours, but you have to understand and resolve them first so that you don't make any mistake during the exam.

tawani

Monday, September 17, 2012 4:00 PM UT

@Crispino, what do you use? Only this dump?

Crispino

Monday, September 17, 2012 9:21 AM UT

Hi all, I have succeed to clear the Switch exam today, the dump is still valid and good luck to all, let meet in the Tshoot Exam.

anzoni

Friday, September 14, 2012 6:00 AM UT

thanks Ume$h,
I was confused with "Table 1-1 Cisco QoS Baseline/Technical Marketing (Interim) Classification and Marking Recommendations" in the same link.
good luck!

Ume$h

Friday, September 14, 2012 4:24 AM UT

Check for

Figure 1-5 Example Strategy for Expanding the Number of Classes of Service over Time
In Link Given by Anzoni

@Anzoni:Nice one .it gives detailed explanation .Priotorization depends whether marking is applied .Tks for the post.

Ume$h

Friday, September 14, 2012 4:21 AM UT

Hi All,

Check this

AutoQoS VoIP became available on Cisco IOS router platforms in 12.2(15)T.
In its second release, for Cisco IOS routers only, AutoQoS Enterprise detects and provisions for up to ten classes of traffic, including the following:

•Voice

•Interactive-Video

•Streaming-Video

•Call-Signaling

•Transactional Data

•Bulk Data

•Routing

•Network Management

•Best Effort

•Scavenger

kaboo

Wednesday, September 12, 2012 9:09 PM UT

passed today.90% valid.good luck

anzoni

Wednesday, September 12, 2012 7:10 PM UT

Hi,
I think packet cos priority D&D is wrong, in http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoSIntro.html ip routing has the highest priority.
Can anyone confirm this??

Ume$h

Wednesday, September 12, 2012 1:25 PM UT

@Lamo:Packet tracer is sufficient for the preparation !!! Some of the commands even may not work on latest packet tracer but don't worry .Remember the steps and process which you should apply on LAB SIM in exam.

Lamo

Tuesday, September 11, 2012 12:05 PM UT

Please Guys , i need a reply ! is packet tracer or boson netstim enough to make all the labs and cover topics in the switch exam or i have any way to buy real equipment ? as u know gns3 is only for routing and limited switching.

Please help,thanks in advance.

Ume$h

Saturday, September 08, 2012 2:10 PM UT

Glop's Dump is still valid !!! Make sure u prepare on LACP sim 2 and u should know how to fix native miss-match error,I tried but couldn't fix it since i was running out of time so left it as it is.With God's Grace i cleared it.

LAB's Covered:

MLS-EIGRP
DOT1X
LACP SIM 2

Peter

Friday, September 07, 2012 11:37 PM UT

@Mohsin

In response to your question about certprep questions, I believe from the route one q while back there were occasionally some questions from the BSCI exam which are no longer on the route exam, so this is prob also the case where there may be some questions around from the BCMSN which are no longer on switch.

I recommend using this dump for studying once you have read the book/study content, views the CBT nuggets and completed all labs in the lab book.

If there one or two questions that are not on the exam from studying you should be able to have a go at them yourself in the exam, even if you get them wrong you should still pass in the high 900s with this dump. Though others have siad they got 100%..

Mohsin

Wednesday, September 05, 2012 3:13 PM UT

By the grace of almighty allah Clear my exam today morning with 100 % score .
All ques from glop .
5 to 6 DnD.
HSRP hotspot
3 Labs , LACP and STP 2,MLS and EIGRP 2 , AAA dot1x .
for lacp lab use glop configration and in the end enable port channel after configuring everything ,won't get native vlan mismatch error or port channel down problem .
Best of luck all of you ,see u in T-shoot :)

Sergi

Monday, September 03, 2012 11:56 AM UT

Just passed the exam today. This dump is still 100% valid. No new questions were asked.

Labs: AAA, MLS with EIGRP, LACP with STP 2 & HSRP Hotspot.

Mohsin

Thursday, August 30, 2012 5:24 AM UT

There are some other questions also in certprep do we practice for those ques also or glop dump ques is valid for MCQ ques because i think certprep have old dumps ques.
certprep is for Labs only or do we practice vtp,vlan,stp,wireless,voice etc questions also

Kuba

Tuesday, August 28, 2012 4:22 PM UT

From Poland
Hi Everyone. Today I have passed the exam with 989/1000. This dump is 100% valid. According to exam output paper, my mistake looks like about High availability.

43 Question
MLS & EIGRP Sim 2 (hosts are connected to Switch B)
AAA Dot1x
HSRP HOTSPOT Sim with Vlan 101 102 103 104 & 105 (priority questions)My mistake was about Vlan 103 probably. it should be the answer DS2 change, with priority value greater than 241-249. I ve chosen DS1 change, which was wrong. ;)
STP & LACP sim 2
VRRP question
Drag&Drop vlan based Implementation (other than "VTP assignments" are needed)
Drag&Drop question with Management Level, Network Level, System Level
The PAgP question (enables PAgp unconditionaly)
MAC address flooding Attack question
IP SLA responder question
Drag&Drop with SNMP versions
Drag&Drop Packet CoS Priority
UDLD reset question
DTP Mode question (desirable to desirable(domanin A&domain A), nonegotiate to nonegotiate(domain A&domain B))
REMEMBER!!! The correct answer is NOT "the default is set" for Maximum number of source MAC address question,which is with voice vlan. The CORRECT Answer is NO MORE THAN TWO SECURE MAC ADDRESS SHOULD BE SET
I did NOT have Wireless question
I did not have STP HOTSPOT
I did not have GLBP question

Kuba

Monday, August 27, 2012 12:32 PM UT

@Muhsin from Pakistan
When you will check this file and compare it with the one which is also GLOP with 150 questions and 130 votes, you will realize that this one is better for preparation and better to understand some of he questions. THERE IS NOT A DIFFERENCE. You can trust this one, this one is just an optimized version of some of the questions like Drag&Drop etc. Dont worry, but also study from certprepare.com to feel safe enough. Like everyone does ;) All of use will go for next exam after this one, therefore, please pay more attention for questions to learn more from questions. You will not have chance for next one year to look into deep theory after this exam. I will go for exam soon and will let you know about my result.
Good luck everyone.

Mohsin

Monday, August 27, 2012 4:29 AM UT

What is a difference between this dump and glop previous dump of 150Q with 130 votes ???? both dumps are of 12th june 2012 .
Is this dump is valid and enough to pass Switch Exam .
and please do share which hotspot and D & D you are having in your exam .thanks

dasd

Sunday, August 26, 2012 4:40 PM UT

joe from Egypt great point! boomish please comment. I understand that you put in some work on this and it is greatly appreciated by myself and many others. But what about the longer tests?

joe

Sunday, August 26, 2012 8:40 AM UT

Guys 1 important question. I see that in the latest dumps are only ~150 questions but on the older ones are almost 500..What's the catch?? Are the latest dumps only 150 questions, or I should also study those 500??
Thanks for the answer in advance.

boomish

Tuesday, August 21, 2012 9:51 PM UT

glop created the origional version i just edited the file a bit to make it more readable I did however discover a error in one of the drag and drops and i've fixed it and re-uploaded it. keep an eye out for it to be posted shortly

Gaeman

Tuesday, August 21, 2012 7:30 PM UT

Hi Glop? or boomish??
This is awesome!! Thanks!!

boomish

Tuesday, August 21, 2012 6:49 PM UT

Yes i corrected some of the drag and drop questions that were non functional
also i improved some of the diagrams that were pretty hard to read.