|
||||||||||||
Home
Tutorials
Exam Formatter
Upload
FAQ
Contact
|
||||||||||||
|
Practice Exams:
Microsoft
Cisco
CompTIA
RedHat
Citrix
|
||||||||||||
|
HP
IBM
CheckPoint
CIW
LPI
Novell
VMware
CWNP
EXIN
Other
|
||||||||||||
|
||||||||||||
|
I`ve passed CCNA, it`s the time to move on CCNP...but i`m not sure if 145q from this dump can help me overcome the exam, does candidate have to train with any dump else ?
Please share your experience ...
Thanks so much
You have a VLAN implementation that requires inter-vlan routing using layer 3 switches. Drag the steps on the left that should be part of the verification plan to the spaces on the right. Not all choices will be used.
Thanks
LACP was:- do not touch VTP or STP. Trunk between switches, VLAN1 must be tagged (change native to something else not being used)
Use Glop and Mustafa and you will be fine!!!!
Thank you Mustafa and Glop!!!
Can I use the tab button to enter full command and can i use shift + ? to check out commands in executing the labs please reply me I am going to take test on this Monday..
Many thanks
Today I entered 642-813 exam and passed with 923 this dump still valid but
take care from spanning tree with lcap lab is change to spanning tree with vtp lab
at the same topology
have a nice days and good luck to all
Those who have given their exam , please share wih me.
Going to give exam this week.
I can't able to understand the config from certprepare.com.
Please guys reply with right configure and steps on LACP with STP Sim.
IN GLOP there are 2 LACP with STP Sims which one came in exam.???
Thanks in advance.
From INDIA
One down two to go ;-)
Best of luck to all.
@MS,kuwait
go to certprepare u will see the config pasted for LACP sim
It's very difficult to get into configuration on those things.
Pl. upload or give me the details of configuration on LACP with STP SIM.
Advance thanks to everybody. Expecting your answer.
Scored 945. This dump is still 100% valid.Thanks to Mustafa Zazakallah Khair.
This dump is still 100% valid, I passed the exam with 912 marks, plz don't waste time and give the exam immediately until its too late.
@Mustafa: Assalaam O Alaicum, many many thanks for sharing this, Allah bless you... :)
Please give me the link or upload the LAB Simulation with Correct Answers.
In Certprepare LACP With STM Sim answers is not clear.
If any body could give all the labs answers properly. that would be very grateful.
I'm going to give exam on this month end or july 1st week.
Thanks
mLS EIGRP,LACP,AAA
All 42 questions are from Mustafa and for simulation refer certprepare.
Concentrate more on LACP.
Thank You and GOOD LUCK for all of U guys.
I buy yesterday Pass4sure Exam And i found it same Moustafa Qu 145 So Don`t worry about the question and solution
i Go to Exam tomorrow And i Will Update you all about any news Goood luck for you all
and Wish for me The luck
All the Questions are came from Nonentity & Mustafa's VCE file , and Simulation Lab are same as from certprepare.com stp+lacp ,Mls+Eigrp & AAA dot1x., They just changed some questions in HSRP Hotspot.
again thanks to Mustafa & Nonentity and all the guys who commented here ,, i really appreciate them.
my email is ahmedalimalik@gmail.com
Regards,
Thank you Mustafa & Nonentity!
Guys, do the 'Nonentity' for 'Drag & Drop's' & for HSRP Hotsopt. Other questions are from Mustafa. Answers are not in the same order.
LABS: LACP, MLS, AAA
Thank you my LORD JESUS CHRIST for granting me success.
I thank nonenty and mustafa.
I wish u all the best
Dump stiil valid
3LABS(),
1.LACP
2.MLS
3.AAA dot1x
HSRP hotspot,
Drag n Drop
thanks to Allah
am pass today
the dump is still valid
thanks to Mostafa
A. No more than one secure MAC address should be set
B. Default is set
C. The IP phone should use the dedicated port, therefore only one MAC address is needed per port
D. No value is needed if the switchport priority extend command is configured
E. No more than two secure MAC addresses should be set
Regarding the drag and drop question for LAP discovery process:
I do not agree with the answer we have in this file. I expecting something like:
1. The IP address is statically configured on the lightweigh AP.
2. The lightweight AP requests an IP address via DHCP
3. The lightweight AP searches for a wireless LAN controller using LWAPP in Layer 2 mode.
4. The lightweight AP sends a LWAPP Discovery Request to the management IP address of the wireless LAN controller via broadcast
5. The wireless LAN controller responds with a Discovery Response from the Manager IP address.
6. The lightweight AP chooses the AP Manager with the least number of associated access points and sends the join request.
I also have doubts, because if we have the IP statically configured why are we sending the DHCP Request? Does not make sense !!! I hate this kind of tricky questions that does not prove anything regarding our knowledge !!!
I will be having the exame tomorrow, can anybody helpp ?!!??!?!?! Please !!! :)
Labs;-
1. LACP (tasked me to config vlan 21,22 and 23).
2. MLS (both the vlan connnecting int was not configd).
3. aaadot1x (same).
1. Distribution Switch (SwitchB)
1) Do not change VTP and STP settings
2) Switch needs to be spanning-tree root for VLAN 11-13,21-23. Other VLAN’s can have default STP priority
3) VLAN’s allowed on the trunk are 1,21-23
Access Switch (SwitchA)
1) STP and VTP settings should be identical to SwitchB
2) Configure VLAN’s as per diagram
3) VLAN 1,21-23 needs to be tagged when traversing the link
4) No routing needed on SwitchA
5) VLAN 1 needs to be configured with IP – 192.168.1.11/24
???????
please reply me fast im welling to do exam tomorrow
All questions were from the dumps...
simulations were aaadot1x, lacp+stp and EIGRP
1.- LACP-STP (nearly the same certprepare)
2.- MLS-EIGRP(very easy)
3.- dot1x (it was the same at certprepare)
HSRP Hotspot
this dump is valid for MCQs for DnD go for a nonetity 407q. we can do copy run start but u will get full marks.
all the best do your exam ASAP its vry ezy :)
The dump still valid
The lab questions are aaa,hsrp,eigrp,lacp
Good luck for those taking exam soon ;)
i want ask u about lab question ?
Section C - Question 28 - what do the "!" mean at each new line? Do I have to put a ! mark at each new line?
Hi friends i passed my exam yesterday.... thanks god....
All questions are from this dump except for one HOTSPOT question about HSRP.
there have 3 labs AAAdot1x, VTP and STP(creat vlan with name Marketing, Sales,
Engineering)& EIGRP 65010 Lab.And 2 Drag & Drops(Local Vlans & End to End Vlans
& Dynamic desirable , dynamic auto , trunk , access and Nonegotiate.
So dont miss that & dont waste your time guys. If you have any question
let me know guys all the best......
Lab :- EIGRP_MLS , AAA & LACP .
Do not panic while doing LACP lab, bzos while doing configuration of Distribution SW (SW-B), we get lots of logs in between of Native VLAN mismatch & vlan blocking error. As soon as you do config. of SWA..error logs will disappear.
Thanks,
Sachin B
1 wireless question, HSRP hot spot, labs are the same as everyone had. AAA, LACP, MLS + Eigrp.
From Where I must Study the SIMS ?? any one can send them to me
my mail eng_amrahmed1986@hotmail.com
The dump is valid but few answers may not be correct. No new questions this time.
1 wireless question, HSRP hot spot, labs are the same as everyone had. AAA, LACP, MLS + Eigrp.
Thanks every one for contributing and good luck!
any body know what are the wrong answers in this dump?
beside the one with Maximum MAC Addresses in port-security for IP Phones?
One of the six questions stated: if int gi0/0/1 on DSW1 goes down then DSW2 will be the active router except if int gi0/0/1 on DSW2 goes down as well then DSW1 should remain the active router. What should be done to allow this: a. the decrement value on DSW1 should be bigger than 5 and smaller than 9 b. the decrement value on DSW1 should be bigger than 9 and smaller than 15 c. the decrement value on DSW1 should be bigger than 11 and smaller than 19 d,e higher decrement values (can't remember the exact numbers)
Now in the show standby command on DSW1 the priority is 200 and for DSW2 its 190, and the decrement values for tracked int gi0/0/1 for DSW1 was 5 and for DSW2 was 10. So I chose the answer C.
If anybody has any question or needs any help he/she can e-mail me on aymannedaa2@gmail.com I'll be out of town for a couple of days so I'll be able to reply starting from Monday.
Thx for all the great work done by admins and users on this site! Hope the best to all…
Passed today with 956, this dump is 100% valid. Got LACP STP, AAA dot1x, and MLS.
the following command was issued on a router that is being configured as active HSRP router:
standby ip 10.2.1.1
Mustafa-freedonsyria is a 100% valid dump file and you can refer nonentity's dumps also for satisfaction.
Kedarshelat@gmail.com
Could you provide me the links where you downloaded all questions for Switching paper ?
Passed with 989/1000 today , There are three D&D which is Local Vlan & End to End Vlan and second one is Dynamic desirable , dynamic auto , trunk , access and Nonegotiate and third one is HSRP with 6 questions.
There are three lab sims which is AAADOT1X , LACP with STP & MLS & EIGRP all are from cert prepare & pass4sure updated. i have gone through MustafaSyria as well as Non entity.
One more thing i would like to share that HSRP is really tuff and you should really prepare well and understand your concepts.
Pls let me know if you want to ask any question , i will be happy to help.